[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230515-topic-rb2-bits-v1-0-a52d154a639d@linaro.org>
Date: Mon, 15 May 2023 15:04:11 +0200
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Bhupesh Sharma <bhupesh.sharma@...aro.org>
Cc: Marijn Suijten <marijn.suijten@...ainline.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Konrad Dybcio <konrad.dybcio@...aro.org>
Subject: [PATCH 0/5] QTI RB2 features
This short series brings a couple of fixes and features
(such as display out) for the QTI RB2 board. Similar patches
for the RB1 should be expected soon.
Depends on and based atop (in order):
20230505075354.1634547-1-bhupesh.sharma@...aro.org
20230502053534.1240553-1-bhupesh.sharma@...aro.org
20230505064039.1630025-1-bhupesh.sharma@...aro.org
Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
---
Konrad Dybcio (5):
arm64: dts: qcom: qrb4210-rb2: Describe fixed regulators
arm64: dts: qcom: qrb4210-rb2: Enable display out
arm64: dts: qcom: qrb4210-rb2: Add GPIO LEDs
arm64: dts: qcom: qrb4210-rb2: Enable load setting on SDHCI VQMMC
arm64: dts: qcom: qrb4210-rb2: Enable CAN bus controller
arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 223 ++++++++++++++++++++++++++++++-
1 file changed, 220 insertions(+), 3 deletions(-)
---
base-commit: c768c054f1a722d4b973ddab81ee580b7e24a891
change-id: 20230515-topic-rb2-bits-22e685b4f48d
Best regards,
--
Konrad Dybcio <konrad.dybcio@...aro.org>
Powered by blists - more mailing lists