[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230516150511.2346357-3-bhupesh.sharma@linaro.org>
Date: Tue, 16 May 2023 20:35:09 +0530
From: Bhupesh Sharma <bhupesh.sharma@...aro.org>
To: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-phy@...ts.infradead.org
Cc: agross@...nel.org, linux-kernel@...r.kernel.org,
andersson@...nel.org, bhupesh.sharma@...aro.org,
bhupesh.linux@...il.com, krzysztof.kozlowski@...aro.org,
robh+dt@...nel.org, konrad.dybcio@...aro.org, kishon@...nel.org,
vkoul@...nel.org, krzysztof.kozlowski+dt@...aro.org,
dmitry.baryshkov@...aro.org
Subject: [PATCH v11 2/4] phy: qcom-qmp-usb: add support for updated qcm2290 / sm6115 binding
Add support for the new qcm2290 / sm6115 binding.
The USB QMP phy on these devices supports 2 lanes. Note that the
binding now does not describe every register subregion and instead
the driver holds the corresponding offsets.
While at it also include support for PCS_MISC region which was left
out earlier.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@...aro.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index 6f2798bbe513..466f0a56c82e 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -1513,9 +1513,13 @@ static const struct qmp_phy_init_tbl sa8775p_usb3_uniphy_pcs_tbl[] = {
struct qmp_usb_offsets {
u16 serdes;
u16 pcs;
+ u16 pcs_misc;
u16 pcs_usb;
u16 tx;
u16 rx;
+ /* for PHYs with >= 2 lanes */
+ u16 tx2;
+ u16 rx2;
};
/* struct qmp_phy_cfg - per-PHY initialization config */
@@ -1668,6 +1672,16 @@ static const struct qmp_usb_offsets qmp_usb_offsets_ipq9574 = {
.rx = 0x400,
};
+static const struct qmp_usb_offsets qmp_usb_offsets_v3 = {
+ .serdes = 0,
+ .pcs = 0xc00,
+ .pcs_misc = 0xa00,
+ .tx = 0x200,
+ .rx = 0x400,
+ .tx2 = 0x600,
+ .rx2 = 0x800,
+};
+
static const struct qmp_usb_offsets qmp_usb_offsets_v5 = {
.serdes = 0,
.pcs = 0x0200,
@@ -2076,6 +2090,8 @@ static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = {
static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = {
.lanes = 2,
+ .offsets = &qmp_usb_offsets_v3,
+
.serdes_tbl = qcm2290_usb3_serdes_tbl,
.serdes_tbl_num = ARRAY_SIZE(qcm2290_usb3_serdes_tbl),
.tx_tbl = qcm2290_usb3_tx_tbl,
@@ -2647,10 +2663,16 @@ static int qmp_usb_parse_dt(struct qmp_usb *qmp)
qmp->serdes = base + offs->serdes;
qmp->pcs = base + offs->pcs;
+ qmp->pcs_misc = base + offs->pcs_misc;
qmp->pcs_usb = base + offs->pcs_usb;
qmp->tx = base + offs->tx;
qmp->rx = base + offs->rx;
+ if (cfg->lanes >= 2) {
+ qmp->tx2 = base + offs->tx2;
+ qmp->rx2 = base + offs->rx2;
+ }
+
qmp->pipe_clk = devm_clk_get(dev, "pipe");
if (IS_ERR(qmp->pipe_clk)) {
return dev_err_probe(dev, PTR_ERR(qmp->pipe_clk),
--
2.38.1
Powered by blists - more mailing lists