[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <cover.1684258957.git.noodles@earth.li>
Date: Tue, 16 May 2023 18:46:55 +0100
From: Jonathan McDowell <noodles@...th.li>
To: Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Chen-Yu Tsai <wens@...e.org>,
Jernej Skrabec <jernej.skrabec@...il.com>,
Samuel Holland <samuel@...lland.org>,
Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <brgl@...ev.pl>,
Conor Dooley <conor+dt@...nel.org>, andy.shevchenko@...il.com
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-sunxi@...ts.linux.dev, linux-kernel@...r.kernel.org,
linux-gpio@...r.kernel.org
Subject: [PATCH v3 0/5] Minor device-tree additions for C.H.I.P
This small patch series adds some improvements for the C.H.I.P DTS,
enabling bluetooth, exporting the PMIC temperature details via iio-hwmon
and finally adding the appropriate base pinmux info for an external MMC
card. As a pre-requisite for the Bluetooth it also adds support to the
AXP209 driver for GPIO3, which is the Bluetooth device wakeup line.
v3:
- Add Reviewed-By/Acked-Bys
- Drop redundant else
- Switch to GENMASK/decimal values for GPIO3 function defs
v2:
- Fix missing ; on bluetooth stanza in DTS
- Add device/host wake GPIOs for Bluetooth device
- Add omit-if-no-ref on the port E pinmux stanza
- Rename axp20x_temp to pmic-temp
- Add AXP209 GPIO3 support
Jonathan McDowell (5):
dt-bindings: gpio: Add GPIO3 for AXP209 GPIO binding schema
pinctrl: axp209: Add support for GPIO3 on the AXP209
ARM: dts: sun5i: chip: Enable bluetooth
ARM: dts: sun5i: Add port E pinmux settings for mmc2
ARM: dts: axp209: Add iio-hwmon node for internal temperature
.../bindings/gpio/x-powers,axp209-gpio.yaml | 1 +
arch/arm/boot/dts/axp209.dtsi | 7 ++++
arch/arm/boot/dts/sun5i-r8-chip.dts | 6 +++
arch/arm/boot/dts/sun5i.dtsi | 9 ++++
drivers/pinctrl/pinctrl-axp209.c | 42 +++++++++++++++++++
5 files changed, 65 insertions(+)
--
2.39.2
Powered by blists - more mailing lists