[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <17931edb-e6c9-cacb-f3a2-fef85c156080@linaro.org>
Date: Tue, 16 May 2023 13:18:28 +0530
From: Bhupesh Sharma <bhupesh.sharma@...aro.org>
To: Konrad Dybcio <konrad.dybcio@...aro.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: Marijn Suijten <marijn.suijten@...ainline.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 0/5] QTI RB2 features
On 5/15/23 6:34 PM, Konrad Dybcio wrote:
> This short series brings a couple of fixes and features
> (such as display out) for the QTI RB2 board. Similar patches
> for the RB1 should be expected soon.
>
> Depends on and based atop (in order):
>
> 20230505075354.1634547-1-bhupesh.sharma@...aro.org
> 20230502053534.1240553-1-bhupesh.sharma@...aro.org
> 20230505064039.1630025-1-bhupesh.sharma@...aro.org
>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
> ---
> Konrad Dybcio (5):
> arm64: dts: qcom: qrb4210-rb2: Describe fixed regulators
> arm64: dts: qcom: qrb4210-rb2: Enable display out
> arm64: dts: qcom: qrb4210-rb2: Add GPIO LEDs
> arm64: dts: qcom: qrb4210-rb2: Enable load setting on SDHCI VQMMC
> arm64: dts: qcom: qrb4210-rb2: Enable CAN bus controller
>
> arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 223 ++++++++++++++++++++++++++++++-
> 1 file changed, 220 insertions(+), 3 deletions(-)
> ---
> base-commit: c768c054f1a722d4b973ddab81ee580b7e24a891
> change-id: 20230515-topic-rb2-bits-22e685b4f48d
>
> Best regards,
For the series:
Reviewed-and-Tested-by: Bhupesh Sharma <bhupesh.sharma@...aro.org>
Thanks.
Powered by blists - more mailing lists