[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230516075217.205401-1-ychuang570808@gmail.com>
Date: Tue, 16 May 2023 07:52:07 +0000
From: Jacky Huang <ychuang570808@...il.com>
To: robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
lee@...nel.org, mturquette@...libre.com, sboyd@...nel.org,
p.zabel@...gutronix.de, gregkh@...uxfoundation.org,
jirislaby@...nel.org, tmaimon77@...il.com, catalin.marinas@....com,
will@...nel.org
Cc: devicetree@...r.kernel.org, linux-clk@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-serial@...r.kernel.org, arnd@...db.de, soc@...nel.org,
schung@...oton.com, mjchen@...oton.com,
Jacky Huang <ychuang3@...oton.com>
Subject: [PATCH v11 00/10] Introduce Nuvoton ma35d1 SoC
From: Jacky Huang <ychuang3@...oton.com>
This patchset adds initial support for the Nuvoton ma35d1 SoC, including
initial device tree, clock driver, reset driver, and serial driver.
This patchset cover letter is based from the initial support for Nuvoton
ma35d1 to keep tracking the version history.
This patchset had been applied to Linux kernel 6.4.0-rc2-dirty
and tested on the Nuvoton ma35d1 SOM evaluation board.
(ma35d1 information: https://www.nuvoton.com/products/microprocessors/arm-cortex-a35-mpus/)
MA35D1 porting on linux-5.10.y can be found at: https://github.com/OpenNuvoton/MPU-Family
v11:
- Modify serial driver
- Fixed several coding style issues
- Fixed ma35d1serial_set_mctrl()
- Added the 'MA35_' prefix to all register and bit field definitions.
- Used 'ttyNVT' instead of 'ttyS'
- Modify clock driver
- Added 'source nuvoton/Kconfig' to drivers/clk/Kconfig
- Fixed several coding issues
- Removed unnecessary inline specifier
- Modify reset driver
- Fixed typo and added comments
- Modify ma35d1.dtsi l2-cache node
- Added cache-unified and cache-size properties
v10:
- Change from using ARCH_NUVOTON to using ARCH_MA35. The following patch files
have been modified:
- patch 1 arch/arm64/Kconfig.platforms
- patch 2 arch/arm64/configs/defconfig
- patch 7 arch/arm64/boot/dts/nuvoton/Makefile
- patch 8 drivers/clk/Makefile
drivers/clk/nuvoton/Kconfig
drivers/clk/nuvoton/Makefile
- patch 9 drivers/reset/Kconfig
- patch 10 drivers/tty/serial/Kconfig
v9:
- Combine MAINTAINERS patch into patch 5 'dt-bindings: arm: Add initial bindings
for Nuvoton platform'
- Modify clock driver
- Use the helper function for 64-bit division
- Fixed minor issues
- Modify reset driver
- Refine coding style and add required header files
- Add spin_lock protection
- Add error return handling to the serial driver probe function
v8:
- Remove '0005-dt-bindings-mfd-syscon-Add-nuvoton-ma35d1-sys-compat.patch' as it was applied.
- Modify MAINTAINERS NUVOTON MA35 and NPCM path settings
- Remove 'syscon' from dtsi 'sys' node and modify the corresponding yaml
- Modify clock driver
- Remove the header file and move definitions into .c files.
- Use parent_data instead of parent name.
- Modify serial driver
- Modify reset driver
- Modify reset register/offset lookup table to be indexed by reset id
- Combined reset and reboot structure
v7:
- Fixed dts system-management node and compatible driver
- move 'nuvoton,npcm-gcr.yaml' from 'binding/arm/nuvoton' to 'binding/soc/nuvoton'
- In ma35d1.dtsi, create the soc node for ma35d1 SoC
- Modify the issues found in serial driver
- Modify the issues found in clock driver
- Modify the IDs of reset driver to be contiguous numbers and use lookup table
to find register offset and bit position.
- Modify MAINTAINERS NUVOTON NPCM path as npcm directory name to nuvoton
v6:
- Combine nuvoton,ma35d1-clk.yaml and nuvoton,ma35d1-clk.h into one patch
- Combine nuvoton,ma35d1-reset.yaml and nuvoton,ma35d1-reset.h into one patch
- rename Documentation/devicetree/bindings/arm/npcm directory as nuvoton
- Remove patch for adding include/linux/mfd/ma35d1-sys.h as it's not required
- Update dtsi & dts files and move board-specific nodes to dts
- Modify reset driver
- Modify serial driver, fix coding style issues
- Modify clock driver, rewrite the PLL calculation functions
v5:
- Add ARCH_NUVOTON to arm64 Kconfig
- Add ARCH_NUVOTON to defconfig
- Add the clock driver
- Add the reset driver
- Add the serial driver
- Add us to the maintainer
v4:
- patch 4/5 is a resend
- Fixed dt_binding_check errors of nuvoton,ma35d1-clk.yaml
- Modify ma35d1.dtsi
1. Add a node hxt_24m
2. Fixed the base address of gic node
3. Add clocks and clock-names to clock node
- Fixed borad binding mistakes of nuvoton.yaml
v3:
- added patch 4/5 and 5/5
- introduce CONFIG_ARCH_NUVOTON option
- add initial bindings for Nuvoton Platform boards
- fixed coding style problem of nuvoton,ma35d1-clk.h
- added CAPLL to clock-controller node
- modify the chosen node of ma35d1-evb.dts
- modify clock yaml "clk-pll-mode" to "nuvoton,clk-pll-mode"
v2:
- fixed dt_binding_check failed of nuvoton,ma35d1-clk.yaml
Jacky Huang (10):
arm64: Kconfig.platforms: Add config for Nuvoton MA35 platform
arm64: defconfig: Add support for Nuvoton MA35 family SoCs
dt-bindings: clock: nuvoton: add binding for ma35d1 clock controller
dt-bindings: reset: nuvoton: Document ma35d1 reset control
dt-bindings: arm: Add initial bindings for Nuvoton platform
dt-bindings: serial: Document ma35d1 uart controller
arm64: dts: nuvoton: Add initial ma35d1 device tree
clk: nuvoton: Add clock driver for ma35d1 clock controller
reset: Add Nuvoton ma35d1 reset driver support
tty: serial: Add Nuvoton ma35d1 serial driver support
.../bindings/arm/nuvoton/nuvoton,ma35d1.yaml | 30 +
.../npcm.yaml => nuvoton/nuvoton,npcm.yaml} | 2 +-
.../bindings/clock/nuvoton,ma35d1-clk.yaml | 63 ++
.../bindings/reset/nuvoton,ma35d1-reset.yaml | 45 +
.../serial/nuvoton,ma35d1-serial.yaml | 48 +
.../nuvoton/nuvoton,npcm-gcr.yaml} | 2 +-
MAINTAINERS | 13 +-
arch/arm64/Kconfig.platforms | 8 +
arch/arm64/boot/dts/nuvoton/Makefile | 2 +
.../boot/dts/nuvoton/ma35d1-iot-512m.dts | 56 ++
.../boot/dts/nuvoton/ma35d1-som-256m.dts | 56 ++
arch/arm64/boot/dts/nuvoton/ma35d1.dtsi | 234 +++++
arch/arm64/configs/defconfig | 1 +
drivers/clk/Kconfig | 1 +
drivers/clk/Makefile | 1 +
drivers/clk/nuvoton/Kconfig | 19 +
drivers/clk/nuvoton/Makefile | 4 +
drivers/clk/nuvoton/clk-ma35d1-divider.c | 135 +++
drivers/clk/nuvoton/clk-ma35d1-pll.c | 361 +++++++
drivers/clk/nuvoton/clk-ma35d1.c | 933 ++++++++++++++++++
drivers/reset/Kconfig | 6 +
drivers/reset/Makefile | 1 +
drivers/reset/reset-ma35d1.c | 235 +++++
drivers/tty/serial/Kconfig | 18 +
drivers/tty/serial/Makefile | 1 +
drivers/tty/serial/ma35d1_serial.c | 800 +++++++++++++++
.../dt-bindings/clock/nuvoton,ma35d1-clk.h | 253 +++++
.../dt-bindings/reset/nuvoton,ma35d1-reset.h | 108 ++
28 files changed, 3433 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/nuvoton/nuvoton,ma35d1.yaml
rename Documentation/devicetree/bindings/arm/{npcm/npcm.yaml => nuvoton/nuvoton,npcm.yaml} (93%)
create mode 100644 Documentation/devicetree/bindings/clock/nuvoton,ma35d1-clk.yaml
create mode 100644 Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml
create mode 100644 Documentation/devicetree/bindings/serial/nuvoton,ma35d1-serial.yaml
rename Documentation/devicetree/bindings/{arm/npcm/nuvoton,gcr.yaml => soc/nuvoton/nuvoton,npcm-gcr.yaml} (93%)
create mode 100644 arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts
create mode 100644 arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
create mode 100644 arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
create mode 100644 drivers/clk/nuvoton/Kconfig
create mode 100644 drivers/clk/nuvoton/Makefile
create mode 100644 drivers/clk/nuvoton/clk-ma35d1-divider.c
create mode 100644 drivers/clk/nuvoton/clk-ma35d1-pll.c
create mode 100644 drivers/clk/nuvoton/clk-ma35d1.c
create mode 100644 drivers/reset/reset-ma35d1.c
create mode 100644 drivers/tty/serial/ma35d1_serial.c
create mode 100644 include/dt-bindings/clock/nuvoton,ma35d1-clk.h
create mode 100644 include/dt-bindings/reset/nuvoton,ma35d1-reset.h
--
2.34.1
Powered by blists - more mailing lists