| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAAYs2=jWwpFzjNqMmyefy6-JEVswfba5MkhaCJ0gvH0bK6zuug@mail.gmail.com>
Date: Tue, 16 May 2023 09:50:47 +0000
From: Song Shuai <suagrfillet@...il.com>
To: palmer@...belt.com
Cc: mark.rutland@....com, bjorn@...osinc.com, e.shatokhin@...ro.com,
jszhang@...nel.org, suagrfillet@...il.com, guoren@...nel.org,
mhiramat@...nel.org, rostedt@...dmis.org, aou@...s.berkeley.edu,
paul.walmsley@...ive.com, linux-riscv@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-trace-kernel@...r.kernel.org
Subject: Re: [PATCH V10 0/4] riscv: Optimize function trace
Song Shuai <suagrfillet@...il.com> 于2023年5月11日周四 09:32写道：
>
> Changes in v10:
>
> - add Acked-by from Björn Töpel in patch 2 and patch 4
> - replace `move` with `mv` in patch3
> - prettify patch 2/4 with proper tabs
>
> You can directly try it with:
>
> https://github.com/sugarfillet/linux/tree/6.4-rc1-rv-ftrace-v10
>
>
Hi, plamer:
This series is ready for its acceptance, you can pick it up.
> This series optimizes function trace. The first 3 independent
> patches has been picked in the V7 version of this series, the
> subsequent version continues the following 4 patches:
>
> select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY [1] (patch 1)
> ==========================================================
>
> In RISC-V, -fpatchable-function-entry option is used to support
> dynamic ftrace in this commit afc76b8b8011 ("riscv: Using
> PATCHABLE_FUNCTION_ENTRY instead of MCOUNT"). So recordmcount
> don't have to be called to create the __mcount_loc section before
> the vmlinux linking.
>
> Here selects FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY to tell
> Makefile not to run recordmcount.
>
> Make function graph use ftrace directly [2] (patch 2)
> ========================================================
>
> In RISC-V architecture, when we enable the ftrace_graph tracer on some
> functions, the function tracings on other functions will suffer extra
> graph tracing work. In essence, graph_ops isn't limited by its func_hash
> due to the global ftrace_graph_[regs]_call label. That should be
> corrected.
>
> What inspires me is the commit 0c0593b45c9b ("x86/ftrace: Make function
> graph use ftrace directly") that uses graph_ops::func function to
> install return_hooker and makes the function called against its
> func_hash.
>
> Add WITH_DIRECT_CALLS support [3] (patch 3, 4)
> ==============================================
>
> This series adds DYNAMIC_FTRACE_WITH_DIRECT_CALLS support for RISC-V.
> SAMPLE_FTRACE_DIRECT and SAMPLE_FTRACE_DIRECT_MULTI are also included
> here as the samples for testing DIRECT_CALLS related interface.
>
> First, select the DYNAMIC_FTRACE_WITH_DIRECT_CALLS to provide
> register_ftrace_direct[_multi] interfaces allowing user to register
> the customed trampoline (direct_caller) as the mcount for one or
> more target functions. And modify_ftrace_direct[_multi] are also
> provided for modify direct_caller.
>
> At the same time, the samples in ./samples/ftrace/ can be built
> as kerenl module for testing these interfaces with SAMPLE_FTRACE_DIRECT
> and SAMPLE_FTRACE_DIRECT_MULTI selected.
>
> Second, to make the direct_caller and the other ftrace hooks
> (eg. function/fgraph tracer, k[ret]probes) co-exist, a temporary
> register
> are nominated to store the address of direct_caller in
> ftrace_regs_caller.
> After the setting of the address direct_caller by direct_ops->func and
> the RESTORE_REGS in ftrace_regs_caller, direct_caller will be jumped to
> by the `jr` inst.
>
> The series's old changes related these patches
> ==========================================
>
> Changes in v9:
> https://lore.kernel.org/linux-riscv/20230510101857.2953955-1-suagrfillet@gmail.com/
>
> 1. add Acked-by from Björn Töpel in patch 1
>
> 2. rebase patch2/patch3 on Linux v6.4-rc1
>
> - patch 2: to make the `SAVE_ABI_REGS` configurable, revert the
> modification of mcount-dyn.S from commit (45b32b946a97 "riscv:
> entry: Consolidate general regs saving/restoring")
>
> - patch 3: to pass the trace_selftest, add the implement of
> `ftrace_stub_direct_tramp` from commit (fee86a4ed536 "ftrace:
> selftest: remove broken trace_direct_tramp") ; and fixup the context
> conflict in Kconfig
>
> Changes in v8:
> https://lore.kernel.org/linux-riscv/20230324033342.3177979-1-suagrfillet@gmail.com/
> - Fix incorrect address values in the 4nd patch
> - Rebased on v6.3-rc2
>
> Changes in v7:
> https://lore.kernel.org/linux-riscv/20230112090603.1295340-1-guoren@kernel.org/
> - Fixup RESTORE_ABI_REGS by remove PT_T0(sp) overwrite.
> - Add FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY [1]
> - Fixup kconfig with HAVE_SAMPLE_FTRACE_DIRECT &
> HAVE_SAMPLE_FTRACE_DIRECT_MULTI
>
> Changes in v6:
> https://lore.kernel.org/linux-riscv/20230107133549.4192639-1-guoren@kernel.org/
> - Replace 8 with MCOUNT_INSN_SIZE
> - Replace "REG_L a1, PT_RA(sp)" with "mv a1, ra"
> - Add Evgenii Shatokhin comment
>
> Changes in v5:
> https://lore.kernel.org/linux-riscv/20221208091244.203407-1-guoren@kernel.org/
> - Sort Kconfig entries in alphabetical order.
>
> Changes in v4:
> https://lore.kernel.org/linux-riscv/20221129033230.255947-1-guoren@kernel.org/
> - Include [3] for maintenance. [Song Shuai]
>
> Changes in V3:
> https://lore.kernel.org/linux-riscv/20221123153950.2911981-1-guoren@kernel.org/
> - Include [2] for maintenance. [Song Shuai]
>
> [1]: https://lore.kernel.org/linux-riscv/CAAYs2=j3Eak9vU6xbAw0zPuoh00rh8v5C2U3fePkokZFibWs2g@mail.gmail.com/T/#t
> [2]: https://lore.kernel.org/lkml/20221120084230.910152-1-suagrfillet@gmail.com/
> [3]: https://lore.kernel.org/linux-riscv/20221123142025.1504030-1-suagrfillet@gmail.com/
>
> Song Shuai (4):
> riscv: select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY
> riscv: ftrace: Add ftrace_graph_func
> riscv: ftrace: Add DYNAMIC_FTRACE_WITH_DIRECT_CALLS support
> samples: ftrace: Add riscv support for SAMPLE_FTRACE_DIRECT[_MULTI]
>
> arch/riscv/Kconfig | 4 +
> arch/riscv/include/asm/ftrace.h | 19 +-
> arch/riscv/kernel/ftrace.c | 30 ++-
> arch/riscv/kernel/mcount-dyn.S | 200 ++++++++++++++++----
> samples/ftrace/ftrace-direct-modify.c | 34 ++++
> samples/ftrace/ftrace-direct-multi-modify.c | 40 ++++
> samples/ftrace/ftrace-direct-multi.c | 24 +++
> samples/ftrace/ftrace-direct-too.c | 27 +++
> samples/ftrace/ftrace-direct.c | 23 +++
> 9 files changed, 345 insertions(+), 56 deletions(-)
>
> --
> 2.20.1
>
--
Thanks,
Song
Powered by blists - more mailing lists