lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Wed, 17 May 2023 12:16:43 -0400
From:   Frank Li <Frank.Li@....com>
To:     vkoul@...nel.org
Cc:     Frank.Li@....com, devicetree@...r.kernel.org, fushi.peng@....com,
        imx@...ts.linux.dev, kernel@...gutronix.de, kishon@...nel.org,
        krzysztof.kozlowski+dt@...aro.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        linux-phy@...ts.infradead.org, robh+dt@...nel.org,
        s.hauer@...gutronix.de, shawnguo@...nel.org
Subject: [PATCH v5 3/6] phy: cadence: salvo: add bist fix

From: Peter Chen <peter.chen@....com>

Very limited parts may fail to work on full speed mode (both host and
device modes) for USB3 port due to higher threshold in full speed receiver
of USB2.0 PHY.

One example failure symptom is, the enumeration is failed when connecting
full speed USB mouse to USB3 port, especially under high temperature.

The workaround is to configure threshold voltage value of single ended
receiver by setting USB2.0 PHY register AFE_RX_REG5[2:0] to 3'b101.

Signed-off-by: Peter Chen <peter.chen@....com>
Signed-off-by: Frank Li <Frank.Li@....com>
---
 drivers/phy/cadence/phy-cadence-salvo.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/phy/cadence/phy-cadence-salvo.c b/drivers/phy/cadence/phy-cadence-salvo.c
index 2e3d4d8fb8eb..5633fd21ae7d 100644
--- a/drivers/phy/cadence/phy-cadence-salvo.c
+++ b/drivers/phy/cadence/phy-cadence-salvo.c
@@ -91,6 +91,7 @@
 
 /* USB2 PHY register definition */
 #define UTMI_REG15				0xaf
+#define UTMI_AFE_RX_REG5			0x12
 
 /* TB_ADDR_TX_RCVDETSC_CTRL */
 #define RXDET_IN_P3_32KHZ			BIT(0)
@@ -247,6 +248,7 @@ static int cdns_salvo_phy_init(struct phy *phy)
 	cdns_salvo_write(salvo_phy, USB2_PHY_OFFSET, UTMI_REG15,
 			 value | TXVALID_GATE_THRESHOLD_HS_0US);
 
+	cdns_salvo_write(salvo_phy, USB2_PHY_OFFSET, UTMI_AFE_RX_REG5, 0x5);
 	udelay(10);
 
 	clk_disable_unprepare(salvo_phy->clk);
-- 
2.34.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ