| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230510-msm8916-regulators-v1-1-54d4960a05fc@gerhold.net>
Date: Wed, 17 May 2023 20:48:40 +0200
From: Stephan Gerhold <stephan@...hold.net>
To: Bjorn Andersson <andersson@...nel.org>
Cc: Andy Gross <agross@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, phone-devel@...r.kernel.org,
~postmarketos/upstreaming@...ts.sr.ht,
Stephan Gerhold <stephan@...hold.net>
Subject: [PATCH 1/8] arm64: dts: qcom: apq8016-sbc: Fix regulator
constraints
For some reason DB410c has completely bogus regulator constraints that
actually just correspond to the programmable voltages which are already
provided by the regulator driver. Some of them are not just outside the
recommended operating conditions of the APQ8016E SoC but even exceed
the absolute maximum ratings, potentially risking permanent device
damage.
In practice it's not quite as dangerous thanks to the RPM firmware:
It turns out that it has its own voltage constraints and silently
clamps all regulator requests. For example, requesting 3.3V for L5
(allowed by the current regulator constraints!) still results in 1.8V
being programmed in the actual regulator hardware.
Experimentation with various voltages shows that the internal RPM
voltage constraints roughly correspond to the safe "specified range"
in the PM8916 Device Specification (rather than the "programmable
range" used inside apq8016-sbc.dtsi right now).
Combine those together with some fixed voltages used in the old
msm-3.10 device tree from Qualcomm to give DB410c some actually valid
voltage constraints.
Cc: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
Fixes: 4c7d53d16d77 ("arm64: dts: apq8016-sbc: add regulators support")
Signed-off-by: Stephan Gerhold <stephan@...hold.net>
---
arch/arm64/boot/dts/qcom/apq8016-sbc.dts | 64 ++++++++++++++++----------------
1 file changed, 32 insertions(+), 32 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
index 59860a2223b8..14cb217a13c1 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
@@ -447,21 +447,21 @@ &smd_rpm_regulators {
vdd_l7-supply = <&pm8916_s4>;
s3 {
- regulator-min-microvolt = <375000>;
- regulator-max-microvolt = <1562000>;
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1350000>;
};
s4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <2150000>;
regulator-always-on;
regulator-boot-on;
};
l1 {
- regulator-min-microvolt = <375000>;
- regulator-max-microvolt = <1525000>;
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
};
l2 {
@@ -470,13 +470,13 @@ l2 {
};
l4 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
};
l5 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
};
l6 {
@@ -485,45 +485,45 @@ l6 {
};
l7 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
};
l8 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
};
l9 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
};
l10 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
};
l11 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
regulator-allow-set-load;
regulator-system-load = <200000>;
};
l12 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
};
l13 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
};
l14 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
};
/**
@@ -531,14 +531,14 @@ l14 {
* for mezzanine boards
*/
l15 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
regulator-always-on;
};
l16 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
};
l17 {
@@ -547,8 +547,8 @@ l17 {
};
l18 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
};
};
--
2.40.1
Powered by blists - more mailing lists