linux-kernel - Re: [PATCH 1/2] arm64: dts: qcom: pmi8998: add flash LED

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <a10695f5-e7d6-7fac-695c-a5b1c17ad56a@linaro.org>
Date:   Wed, 17 May 2023 21:07:06 +0200
From:   Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To:     Dylan Van Assche <me@...anvanassche.be>, agross@...nel.org,
        andersson@...nel.org, konrad.dybcio@...aro.org, robh+dt@...nel.org,
        krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org
Cc:     linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        ~postmarketos/upstreaming@...ts.sr.ht, phone-devel@...r.kernel.org,
        amartinz@...ftphones.com
Subject: Re: [PATCH 1/2] arm64: dts: qcom: pmi8998: add flash LED

On 17/05/2023 20:21, Dylan Van Assche wrote:
> Qualcomm PMIC PMI8998 has a 3 channel flash LED driver which is used
> by many phones for 1 or 2 flash LEDs. Each LED can be used in flash mode
> or torch mode. Add the flash LED node to PMI8998 DTS.
> 
> Signed-off-by: Dylan Van Assche <me@...anvanassche.be>
> ---
>  arch/arm64/boot/dts/qcom/pmi8998.dtsi | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
> index ffe587f281d8..89f959353ad5 100644
> --- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
> @@ -60,6 +60,12 @@ pmi8998_lpg: pwm {
>  			status = "disabled";
>  		};
>  
> +		pmi8998_flash: led-controller@...0 {
> +			compatible = "qcom,spmi-flash-led";

This cannot be alone.

It does not look like you tested the DTS against bindings. Please run
`make dtbs_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions).

Best regards,
Krzysztof