[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ydojobluzb4cujqzd5wjztj42h625sx3x2dbqrmvzf2lxnpum5@guk7gzkc7bht>
Date: Thu, 18 May 2023 00:53:44 +0200
From: Marijn Suijten <marijn.suijten@...ainline.org>
To: Kuogee Hsieh <quic_khsieh@...cinc.com>
Cc: dri-devel@...ts.freedesktop.org, robdclark@...il.com,
sean@...rly.run, swboyd@...omium.org, dianders@...omium.org,
vkoul@...nel.org, daniel@...ll.ch, airlied@...il.com,
agross@...nel.org, dmitry.baryshkov@...aro.org,
andersson@...nel.org, quic_abhinavk@...cinc.com,
quic_jesszhan@...cinc.com, quic_sbillaka@...cinc.com,
freedreno@...ts.freedesktop.org, linux-arm-msm@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v10 8/8] drm/msm/dpu: tear down DSC data path when DSC
disabled
Title: Tear down DSC datapath* on encoder cleanup*
On 2023-05-17 15:01:59, Kuogee Hsieh wrote:
> Unset DSC_ACTIVE bit at dpu_hw_ctl_reset_intf_cfg_v1(),
> dpu_encoder_unprep_dsc() and dpu_encoder_dsc_pipe_clr() functions
> to tear down DSC data path if DSC data path was setup previous.
>
> Changes in V10:
> -- pass ctl directly instead of dpu_enc to dsc_pipe_cfg()
> -- move both dpu_encoder_unprep_dsc() and dpu_encoder_dsc_pipe_clr() to above phys_cleanup()
>
> Signed-off-by: Kuogee Hsieh <quic_khsieh@...cinc.com>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@...ainline.org>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 39 +++++++++++++++++++++++++++++
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 7 ++++++
> 2 files changed, 46 insertions(+)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> index 1957545..ec2a55a6 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> @@ -2036,6 +2036,41 @@ static void dpu_encoder_helper_reset_mixers(struct dpu_encoder_phys *phys_enc)
> }
> }
>
> +static void dpu_encoder_dsc_pipe_clr(struct dpu_hw_ctl *ctl,
> + struct dpu_hw_dsc *hw_dsc,
> + struct dpu_hw_pingpong *hw_pp)
> +{
> + if (hw_dsc->ops.dsc_disable)
> + hw_dsc->ops.dsc_disable(hw_dsc);
> +
> + if (hw_pp->ops.disable_dsc)
> + hw_pp->ops.disable_dsc(hw_pp);
> +
> + if (hw_dsc->ops.dsc_bind_pingpong_blk)
> + hw_dsc->ops.dsc_bind_pingpong_blk(hw_dsc, PINGPONG_NONE);
> +
> + if (ctl->ops.update_pending_flush_dsc)
> + ctl->ops.update_pending_flush_dsc(ctl, hw_dsc->idx);
> +}
> +
> +static void dpu_encoder_unprep_dsc(struct dpu_encoder_virt *dpu_enc)
> +{
> + /* coding only for 2LM, 2enc, 1 dsc config */
> + struct dpu_encoder_phys *enc_master = dpu_enc->cur_master;
> + struct dpu_hw_ctl *ctl = enc_master->hw_ctl;
> + struct dpu_hw_dsc *hw_dsc[MAX_CHANNELS_PER_ENC];
> + struct dpu_hw_pingpong *hw_pp[MAX_CHANNELS_PER_ENC];
> + int i;
> +
> + for (i = 0; i < MAX_CHANNELS_PER_ENC; i++) {
> + hw_pp[i] = dpu_enc->hw_pp[i];
> + hw_dsc[i] = dpu_enc->hw_dsc[i];
> +
> + if (hw_pp[i] && hw_dsc[i])
> + dpu_encoder_dsc_pipe_clr(ctl, hw_dsc[i], hw_pp[i]);
> + }
> +}
> +
> void dpu_encoder_helper_phys_cleanup(struct dpu_encoder_phys *phys_enc)
> {
> struct dpu_hw_ctl *ctl = phys_enc->hw_ctl;
> @@ -2086,8 +2121,12 @@ void dpu_encoder_helper_phys_cleanup(struct dpu_encoder_phys *phys_enc)
> phys_enc->hw_pp->merge_3d->idx);
> }
>
> + if (dpu_enc->dsc)
> + dpu_encoder_unprep_dsc(dpu_enc);
> +
> intf_cfg.stream_sel = 0; /* Don't care value for video mode */
> intf_cfg.mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc);
> + intf_cfg.dsc = dpu_encoder_helper_get_dsc(phys_enc);
>
> if (phys_enc->hw_intf)
> intf_cfg.intf = phys_enc->hw_intf->idx;
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> index 4e132d9..2663626 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> @@ -578,6 +578,7 @@ static void dpu_hw_ctl_reset_intf_cfg_v1(struct dpu_hw_ctl *ctx,
> u32 intf_active = 0;
> u32 wb_active = 0;
> u32 merge3d_active = 0;
> + u32 dsc_active;
>
> /*
> * This API resets each portion of the CTL path namely,
> @@ -607,6 +608,12 @@ static void dpu_hw_ctl_reset_intf_cfg_v1(struct dpu_hw_ctl *ctx,
> wb_active &= ~BIT(cfg->wb - WB_0);
> DPU_REG_WRITE(c, CTL_WB_ACTIVE, wb_active);
> }
> +
> + if (cfg->dsc) {
> + dsc_active = DPU_REG_READ(c, CTL_DSC_ACTIVE);
> + dsc_active &= ~cfg->dsc;
> + DPU_REG_WRITE(c, CTL_DSC_ACTIVE, dsc_active);
> + }
> }
>
> static void dpu_hw_ctl_set_fetch_pipe_active(struct dpu_hw_ctl *ctx,
> --
> 2.7.4
>
Powered by blists - more mailing lists