linux-kernel - [PATCH 2/3] dt-bindings: pinctrl: at91-pio4: Add push-pull support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <048a41d1dcb3da0e845986a73eaac61a54c69269.1684313910.git.Ryan.Wanner@microchip.com>
Date:   Wed, 17 May 2023 13:54:05 +0200
From:   <Ryan.Wanner@...rochip.com>
To:     <robh+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
        <conor+dt@...nel.org>, <nicolas.ferre@...rochip.com>,
        <alexandre.belloni@...tlin.com>, <claudiu.beznea@...rochip.com>,
        <linus.walleij@...aro.org>, <ludovic.desroches@...rochip.com>
CC:     <devicetree@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, <linux-gpio@...r.kernel.org>,
        Ryan Wanner <Ryan.Wanner@...rochip.com>
Subject: [PATCH 2/3] dt-bindings: pinctrl: at91-pio4: Add push-pull support

From: Ryan Wanner <Ryan.Wanner@...rochip.com>

Add generic push-pull support for pio4 driver.

Signed-off-by: Ryan Wanner <Ryan.Wanner@...rochip.com>
---
 .../devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt    | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
index e2b861ce16d8..774c3c269c40 100644
--- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
@@ -37,7 +37,8 @@ right representation of the pin.
 Optional properties:
 - GENERIC_PINCONFIG: generic pinconfig options to use:
 	- bias-disable, bias-pull-down, bias-pull-up, drive-open-drain,
-	  input-schmitt-enable, input-debounce, output-low, output-high.
+	 drive-push-pull input-schmitt-enable, input-debounce, output-low,
+	 output-high.
 	- for microchip,sama7g5-pinctrl only:
 		- slew-rate: 0 - disabled, 1 - enabled (default)
 - atmel,drive-strength: 0 or 1 for low drive, 2 for medium drive and 3 for
-- 
2.39.2