Message-ID: <aeef04c4-7952-2b7c-d673-5c75dda19154@quicinc.com>
Date:   Thu, 18 May 2023 15:17:47 -0700
From:   Jessica Zhang <quic_jesszhan@...cinc.com>
To:     Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
        Neil Armstrong <neil.armstrong@...aro.org>,
        Sam Ravnborg <sam@...nborg.org>,
        David Airlie <airlied@...il.com>,
        Daniel Vetter <daniel@...ll.ch>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
CC:     Abhinav Kumar <quic_abhinavk@...cinc.com>,
        <dri-devel@...ts.freedesktop.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 2/2] drm/panel: Add driver for Visionox r66451 panel



On 5/17/2023 5:19 PM, Dmitry Baryshkov wrote:
> On 16/05/2023 23:20, Jessica Zhang wrote:
>> Add support for the 1080x2340 Visionox R66451 AMOLED DSI panel that
>> comes with the Qualcomm HDK8350 display expansion pack.
>>
>> The panel enables display compression (DSC v1.2) by default.
>>
>> Signed-off-by: Jessica Zhang <quic_jesszhan@...cinc.com>
>> ---
>>   drivers/gpu/drm/panel/Kconfig                 |   8 +
>>   drivers/gpu/drm/panel/Makefile                |   1 +
>>   drivers/gpu/drm/panel/panel-visionox-r66451.c | 395 
>> ++++++++++++++++++++++++++
>>   3 files changed, 404 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/panel/Kconfig 
>> b/drivers/gpu/drm/panel/Kconfig
>> index 29cf5fa39ff2..9c2c36dbddf3 100644
>> --- a/drivers/gpu/drm/panel/Kconfig
>> +++ b/drivers/gpu/drm/panel/Kconfig
>> @@ -766,6 +766,14 @@ config DRM_PANEL_VISIONOX_VTDR6130
>>         Say Y here if you want to enable support for Visionox
>>         VTDR6130 1080x2400 AMOLED DSI panel.
>> +config DRM_PANEL_VISIONOX_R66451
>> +    tristate "Visionox R66451"
>> +    depends on OF
>> +    depends on DRM_MIPI_DSI
>> +    help
>> +      Say Y here if you want to enable support for Visionox
>> +      R66451 1080x2340 AMOLED DSI panel.
>> +
>>   config DRM_PANEL_WIDECHIPS_WS2401
>>       tristate "Widechips WS2401 DPI panel driver"
>>       depends on SPI && GPIOLIB
>> diff --git a/drivers/gpu/drm/panel/Makefile 
>> b/drivers/gpu/drm/panel/Makefile
>> index b3e8ba29edd3..e043a92ee676 100644
>> --- a/drivers/gpu/drm/panel/Makefile
>> +++ b/drivers/gpu/drm/panel/Makefile
>> @@ -78,5 +78,6 @@ obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += 
>> panel-tpo-tpg110.o
>>   obj-$(CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA) += panel-truly-nt35597.o
>>   obj-$(CONFIG_DRM_PANEL_VISIONOX_RM69299) += panel-visionox-rm69299.o
>>   obj-$(CONFIG_DRM_PANEL_VISIONOX_VTDR6130) += panel-visionox-vtdr6130.o
>> +obj-$(CONFIG_DRM_PANEL_VISIONOX_R66451) += panel-visionox-r66451.o
>>   obj-$(CONFIG_DRM_PANEL_WIDECHIPS_WS2401) += panel-widechips-ws2401.o
>>   obj-$(CONFIG_DRM_PANEL_XINPENG_XPP055C272) += 
>> panel-xinpeng-xpp055c272.o
>> diff --git a/drivers/gpu/drm/panel/panel-visionox-r66451.c 
>> b/drivers/gpu/drm/panel/panel-visionox-r66451.c
>> new file mode 100644
>> index 000000000000..e3648ead3e84
>> --- /dev/null
>> +++ b/drivers/gpu/drm/panel/panel-visionox-r66451.c
>> @@ -0,0 +1,395 @@
>> +//SPDX-License-Identifier: GPL-2.0-only
>> +//Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights 
>> reserved.
>> +
>> +#include <linux/backlight.h>
>> +#include <linux/delay.h>
>> +#include <linux/gpio/consumer.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/regulator/consumer.h>
>> +
>> +#include <drm/drm_mipi_dsi.h>
>> +#include <drm/drm_modes.h>
>> +#include <drm/drm_panel.h>
>> +#include <drm/display/drm_dsc.h>
>> +#include <drm/display/drm_dsc_helper.h>
>> +
>> +#include <video/mipi_display.h>
>> +
>> +struct visionox_r66451 {
>> +    struct drm_panel panel;
>> +    struct mipi_dsi_device *dsi;
>> +    struct gpio_desc *reset_gpio;
>> +    struct regulator_bulk_data supplies[2];
>> +    bool prepared, enabled;
>> +};
>> +
>> +static inline struct visionox_r66451 *to_visionox_r66451(struct 
>> drm_panel *panel)
>> +{
>> +    return container_of(panel, struct visionox_r66451, panel);
>> +}
>> +
>> +static void visionox_r66451_reset(struct visionox_r66451 *ctx)
>> +{
>> +    gpiod_set_value_cansleep(ctx->reset_gpio, 0);
>> +    usleep_range(10000, 10100);
>> +    gpiod_set_value_cansleep(ctx->reset_gpio, 1);
>> +    usleep_range(10000, 10100);
>> +    gpiod_set_value_cansleep(ctx->reset_gpio, 0);
>> +    usleep_range(10000, 10100);
>> +}
>> +
>> +static int visionox_r66451_on(struct visionox_r66451 *ctx)
>> +{
>> +    struct mipi_dsi_device *dsi = ctx->dsi;
>> +    struct device *dev = &dsi->dev;
>> +    int ret;
>> +
>> +    dsi->mode_flags |= MIPI_DSI_MODE_LPM;
>> +
>> +    mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x00);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xc2,
>> +                   0x09, 0x24, 0x0c, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x00,
>> +                   0x09, 0x3c);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xd7,
>> +                   0x00, 0xb9, 0x3c, 0x00, 0x40, 0x04, 0x00, 0xa0, 0x0a,
>> +                   0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x19,
>> +                   0x3c, 0x00, 0x40, 0x04, 0x00, 0xa0, 0x0a);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x80);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xde,
>> +                   0x40, 0x00, 0x18, 0x00, 0x18, 0x00, 0x18, 0x00, 0x18,
>> +                   0x10, 0x00, 0x18, 0x00, 0x18, 0x00, 0x18, 0x02, 
>> 0x00, 0x00);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x04);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xe8, 0x00, 0x02);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xe4, 0x00, 0x08);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x00);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xc4,
>> +                   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
>> +                   0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x32);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xcf,
>> +                   0x64, 0x0b, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08,
>> +                   0x00, 0x0b, 0x77, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
>> +                   0x02, 0x02, 0x02, 0x02, 0x02, 0x03);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xd3,
>> +                   0x45, 0x00, 0x00, 0x01, 0x13, 0x15, 0x00, 0x15, 0x07,
>> +                   0x0f, 0x77, 0x77, 0x77, 0x37, 0xb2, 0x11, 0x00, 0xa0,
>> +                   0x3c, 0x9c);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xd7,
>> +                   0x00, 0xb9, 0x34, 0x00, 0x40, 0x04, 0x00, 0xa0, 0x0a,
>> +                   0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x19,
>> +                   0x34, 0x00, 0x40, 0x04, 0x00, 0xa0, 0x0a);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xd8,
>> +                   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
>> +                   0x3a, 0x00, 0x3a, 0x00, 0x3a, 0x00, 0x3a, 0x00, 0x3a,
>> +                   0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
>> +                   0x00, 0x0a, 0x00, 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00,
>> +                   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0a,
>> +                   0x00, 0x32, 0x00, 0x0a, 0x00, 0x22);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xdf,
>> +                   0x50, 0x42, 0x58, 0x81, 0x2d, 0x00, 0x00, 0x00, 0x00,
>> +                   0x00, 0x00, 0x6b, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
>> +                   0x00, 0x00, 0x01, 0x0f, 0xff, 0xd4, 0x0e, 0x00, 0x00,
>> +                   0x00, 0x00, 0x00, 0x00, 0x0f, 0x53, 0xf1, 0x00, 0x00,
>> +                   0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xf7, 0x01);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x80);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xe4, 0x34, 0xb4, 0x00, 0x00, 0x00, 
>> 0x39, 0x04, 0x09, 0x34);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xe6, 0x00);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x04);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xdf, 0x50, 0x40);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xf3, 0x50, 0x00, 0x00, 0x00, 0x00);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xf2, 0x11);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xf3, 0x01, 0x00, 0x00, 0x00, 0x01);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xf4, 0x00, 0x02);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xf2, 0x19);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xdf, 0x50, 0x42);
>> +    mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
>> +    mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_SET_COLUMN_ADDRESS, 0x00, 
>> 0x00, 0x04, 0x37);
> 
> Please use mipi_dsi_dcs_set_column_address(dsi, 0, 1080 - 1);

Hi Dmitry,

Acked.

> 
>> +    mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_SET_PAGE_ADDRESS, 0x00, 
>> 0x00, 0x09, 0x23);
> 
> mipi_dsi_dcs_set_page_address(dsi, 0, 2340 - 1);

Acked.

> 
>> +
>> +    ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
>> +    if (ret < 0) {
>> +        dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
>> +        return ret;
>> +    }
>> +    msleep(120);
>> +
>> +    ret = mipi_dsi_dcs_set_display_on(dsi);
> 
> Should the mipi_dsi_dcs_set_display_on() (and maybe exit sleep mode) be 
> a a part of _enable()? Correspondingly _off should IMO be a part of 
> _disable callback().

Acked. Looking at the downstream code, it seems that all the dcs on 
commands can be sent within _enable() (and similarly for the off 
commands with _disable()).

> 
>> +    if (ret < 0) {
>> +        dev_err(dev, "Failed on set display on: %d\n", ret);
>> +        return ret;
>> +    }
>> +    msleep(20);
> 
> 
> Do we need to add here the following line?
> 
> dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;

Do you mean within the return on error block?

 From my understanding, we should be setting the MIPI_DSI_MODE_LPM for 
panel_on() then unsetting MODE_LPM in panel_off().

> 
> 
>> +
>> +    return 0;
>> +}
>> +
>> +static int visionox_r66451_off(struct visionox_r66451 *ctx)
>> +{
>> +    struct mipi_dsi_device *dsi = ctx->dsi;
>> +    struct device *dev = &dsi->dev;
>> +    int ret;
>> +
>> +    dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
>> +
>> +    ret = mipi_dsi_dcs_set_display_off(dsi);
>> +    if (ret < 0) {
>> +        dev_err(dev, "Failed to set display off: %d\n", ret);
>> +        return ret;
>> +    }
>> +    msleep(20);
>> +
>> +    ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
>> +    if (ret < 0) {
>> +        dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
>> +        return ret;
>> +    }
>> +    msleep(120);
>> +
>> +    return 0;
>> +}
>> +
>> +static int visionox_r66451_prepare(struct drm_panel *panel)
>> +{
>> +    struct visionox_r66451 *ctx = to_visionox_r66451(panel);
>> +    struct device *dev = &ctx->dsi->dev;
>> +    int ret;
>> +
>> +    if (ctx->prepared)
>> +        return 0;
>> +
>> +    ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies),
>> +                    ctx->supplies);
>> +    if (ret < 0)
>> +        return ret;
>> +
>> +    visionox_r66451_reset(ctx);
>> +
>> +    ret = visionox_r66451_on(ctx);
>> +    if (ret < 0) {
>> +        dev_err(dev, "Failed to initialize panel: %d\n", ret);
>> +        gpiod_set_value_cansleep(ctx->reset_gpio, 1);
>> +        regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), 
>> ctx->supplies);
>> +        return ret;
>> +    }
>> +
>> +    ctx->prepared = true;
>> +    return 0;
>> +}
>> +
>> +static int visionox_r66451_unprepare(struct drm_panel *panel)
>> +{
>> +    struct visionox_r66451 *ctx = to_visionox_r66451(panel);
>> +    struct device *dev = &ctx->dsi->dev;
>> +    int ret;
>> +
>> +    if (!ctx->prepared)
>> +        return 0;
>> +
>> +    ret = visionox_r66451_off(ctx);
>> +    if (ret < 0)
>> +        dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
>> +
>> +    gpiod_set_value_cansleep(ctx->reset_gpio, 1);
>> +    regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
>> +
>> +    ctx->prepared = false;
>> +    return 0;
>> +}
>> +
>> +static const struct drm_display_mode visionox_r66451_mode = {
>> +    .clock = (1080 + 95 + 1 + 40) * (2340 + 25 + 1 + 4) * 120 / 1000,
>> +    .hdisplay = 1080,
>> +    .hsync_start = 1080 + 95,
>> +    .hsync_end = 1080 + 95 + 1,
>> +    .htotal = 1080 + 95 + 1 + 40,
>> +    .vdisplay = 2340,
>> +    .vsync_start = 2340 + 25,
>> +    .vsync_end = 2340 + 25 + 1,
>> +    .vtotal = 2340 + 25 + 1 + 4,
>> +    .width_mm = 0,
>> +    .height_mm = 0,
> 
> Please provide real values here.

Acked.

> 
>> +};
>> +
>> +static int visionox_r66451_enable(struct drm_panel *panel)
>> +{
>> +    struct visionox_r66451 *ctx = to_visionox_r66451(panel);
>> +    struct mipi_dsi_device *dsi = ctx->dsi;
>> +    struct drm_dsc_picture_parameter_set pps;
>> +    int ret;
>> +
>> +    if (ctx->enabled)
>> +        return 0;
>> +
>> +    if (!dsi->dsc) {
>> +        dev_err(&dsi->dev, "DSC not attached to DSI\n");
>> +        return -ENODEV;
>> +    }
>> +
>> +    drm_dsc_pps_payload_pack(&pps, dsi->dsc);
>> +    ret = mipi_dsi_picture_parameter_set(dsi, &pps);
>> +
>> +    ctx->enabled = true;
>> +
>> +    return 0;
>> +}
>> +
>> +static int visionox_r66451_disable(struct drm_panel *panel)
>> +{
>> +    struct visionox_r66451 *ctx = to_visionox_r66451(panel);
>> +
>> +    ctx->enabled = false;
>> +
>> +    return 0;
>> +}
>> +
>> +static int visionox_r66451_get_modes(struct drm_panel *panel,
>> +                    struct drm_connector *connector)
>> +{
>> +    struct drm_display_mode *mode;
>> +
>> +    mode = drm_mode_duplicate(connector->dev, &visionox_r66451_mode);
>> +    if (!mode)
>> +        return -ENOMEM;
>> +
>> +    drm_mode_set_name(mode);
>> +
>> +    mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
>> +    connector->display_info.width_mm = mode->width_mm;
>> +    connector->display_info.height_mm = mode->height_mm;
>> +    drm_mode_probed_add(connector, mode);
> 
> Can we use drm_connector_helper_get_modes_fixed() instead?

Acked.

> 
>> +
>> +    return 1;
>> +}
>> +
>> +static const struct drm_panel_funcs visionox_r66451_funcs = {
>> +    .prepare = visionox_r66451_prepare,
>> +    .unprepare = visionox_r66451_unprepare,
>> +    .get_modes = visionox_r66451_get_modes,
>> +    .enable = visionox_r66451_enable,
>> +    .disable = visionox_r66451_disable,
>> +};
>> +
>> +static int visionox_r66451_bl_update_status(struct backlight_device *bl)
>> +{
>> +    struct mipi_dsi_device *dsi = bl_get_data(bl);
>> +    u16 brightness = backlight_get_brightness(bl);
>> +
>> +    return mipi_dsi_dcs_set_display_brightness(dsi, 
>> cpu_to_le16(brightness));
> 
> mipi_dsi_dcs_set_display_brightness() already converts the brightness, 
> so you don't need cpu_to_le16 here.

Acked.

Thanks,

Jessica Zhang

> 
>> +}
>> +
>> +static const struct backlight_ops visionox_r66451_bl_ops = {
>> +    .update_status = visionox_r66451_bl_update_status,
>> +};
>> +
>> +static struct backlight_device *
>> +visionox_r66451_create_backlight(struct mipi_dsi_device *dsi)
>> +{
>> +    struct device *dev = &dsi->dev;
>> +    const struct backlight_properties props = {
>> +        .type = BACKLIGHT_RAW,
>> +        .brightness = 255,
>> +        .max_brightness = 4095,
>> +    };
>> +
>> +    return devm_backlight_device_register(dev, dev_name(dev), dev, dsi,
>> +                          &visionox_r66451_bl_ops, &props);
>> +}
>> +
>> +static int visionox_r66451_probe(struct mipi_dsi_device *dsi)
>> +{
>> +    struct device *dev = &dsi->dev;
>> +    struct visionox_r66451 *ctx;
>> +    struct drm_dsc_config *dsc;
>> +    int ret = 0;
>> +
>> +    ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
>> +    if (!ctx)
>> +        return -ENOMEM;
>> +
>> +    dsc = devm_kzalloc(dev, sizeof(*dsc), GFP_KERNEL);
>> +    if (!dsc)
>> +        return -ENOMEM;
>> +
>> +    /* Set DSC params */
>> +    dsc->dsc_version_major = 0x1;
>> +    dsc->dsc_version_minor = 0x2;
>> +
>> +    dsc->slice_height = 20;
>> +    dsc->slice_width = 540;
>> +    dsc->slice_count = 2;
>> +    dsc->bits_per_component = 8;
>> +    dsc->bits_per_pixel = 0x8 << 4;
>> +    dsc->block_pred_enable = true;
>> +
>> +    dsi->dsc = dsc;
>> +
>> +    ctx->supplies[0].supply = "vddio";
>> +    ctx->supplies[1].supply = "vdd";
>> +
>> +    ret = devm_regulator_bulk_get(&dsi->dev, ARRAY_SIZE(ctx->supplies),
>> +            ctx->supplies);
>> +
>> +    if (ret < 0)
>> +        return ret;
>> +
>> +    ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
>> +    if (IS_ERR(ctx->reset_gpio))
>> +        return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio), "Failed 
>> to get reset-gpios\n");
>> +
>> +    ctx->dsi = dsi;
>> +    mipi_dsi_set_drvdata(dsi, ctx);
>> +
>> +    dsi->lanes = 4;
>> +    dsi->format = MIPI_DSI_FMT_RGB888;
>> +    dsi->mode_flags = MIPI_DSI_MODE_LPM | MIPI_DSI_CLOCK_NON_CONTINUOUS;
>> +
>> +    drm_panel_init(&ctx->panel, dev, &visionox_r66451_funcs, 
>> DRM_MODE_CONNECTOR_DSI);
>> +    ctx->panel.backlight = visionox_r66451_create_backlight(dsi);
>> +    if (IS_ERR(ctx->panel.backlight))
>> +        return dev_err_probe(dev, PTR_ERR(ctx->panel.backlight),
>> +                "Failed to create backlight\n");
>> +
>> +    drm_panel_add(&ctx->panel);
>> +
>> +    ret = mipi_dsi_attach(dsi);
>> +    if (ret < 0) {
>> +        dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
>> +        drm_panel_remove(&ctx->panel);
>> +    }
>> +
>> +    return ret;
>> +}
>> +
>> +static void visionox_r66451_remove(struct mipi_dsi_device *dsi)
>> +{
>> +    struct visionox_r66451 *ctx = mipi_dsi_get_drvdata(dsi);
>> +    int ret;
>> +
>> +    ret = mipi_dsi_detach(dsi);
>> +    if (ret < 0)
>> +        dev_err(&dsi->dev, "Failed to detach DSI host: %d\n", ret);
>> +
>> +    drm_panel_remove(&ctx->panel);
>> +}
>> +
>> +static const struct of_device_id visionox_r66451_of_match[] = {
>> +    {.compatible = "visionox,r66451"},
>> +    { /*sentinel*/ }
>> +};
>> +MODULE_DEVICE_TABLE(of, visionox_r66451_of_match);
>> +
>> +static struct mipi_dsi_driver visionox_r66451_driver = {
>> +    .probe = visionox_r66451_probe,
>> +    .remove = visionox_r66451_remove,
>> +    .driver = {
>> +        .name = "panel-visionox-r66451",
>> +        .of_match_table = visionox_r66451_of_match,
>> +    },
>> +};
>> +
>> +module_mipi_dsi_driver(visionox_r66451_driver);
>> +
>> +MODULE_AUTHOR("Jessica Zhang <quic_jesszhan@...cinc.com>");
>> +MODULE_DESCRIPTION("Panel driver for the Visionox R66451 AMOLED DSI 
>> panel");
>> +MODULE_LICENSE("GPL");
>>
> 
> -- 
> With best wishes
> Dmitry
> 

Powered by blists - more mailing lists