[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230518092913.977705-1-o.rempel@pengutronix.de>
Date: Thu, 18 May 2023 11:29:11 +0200
From: Oleksij Rempel <o.rempel@...gutronix.de>
To: "David S. Miller" <davem@...emloft.net>,
Andrew Lunn <andrew@...n.ch>,
Eric Dumazet <edumazet@...gle.com>,
Florian Fainelli <f.fainelli@...il.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Vladimir Oltean <olteanv@...il.com>,
Woojung Huh <woojung.huh@...rochip.com>,
Arun Ramadoss <arun.ramadoss@...rochip.com>,
"Russell King (Oracle)" <linux@...linux.org.uk>
Cc: Oleksij Rempel <o.rempel@...gutronix.de>, kernel@...gutronix.de,
linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
UNGLinuxDriver@...rochip.com
Subject: [PATCH net-next v3 0/2] Fine-Tune Flow Control and Speed Configurations in Microchip KSZ8xxx DSA Driver
changes v3:
- remove half duplex flow control configuration
- add comments
- s/stram/stream
changes v2:
- split the patch to upstrean and downstream part
- add comments
- fix downstream register offset
- fix cpu configuration
This patch set focuses on enhancing the configurability of flow
control, speed, and duplex settings in the Microchip KSZ8xxx DSA driver.
The first patch allows more granular control over the CPU port's flow
control, speed, and duplex settings. The second patch introduces a
method for downstream port configurations, primarily concerning flow
control based on duplex mode.
Oleksij Rempel (2):
net: dsa: microchip: ksz8: Make flow control, speed, and duplex on CPU
port configurable
net: dsa: microchip: ksz8: Add function to configure downstream ports
for KSZ8xxx
drivers/net/dsa/microchip/ksz8.h | 4 +
drivers/net/dsa/microchip/ksz8795.c | 131 ++++++++++++++++++++++++-
drivers/net/dsa/microchip/ksz_common.c | 1 +
3 files changed, 134 insertions(+), 2 deletions(-)
--
2.39.2
Powered by blists - more mailing lists