[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230519090219.15925-7-quic_devipriy@quicinc.com>
Date: Fri, 19 May 2023 14:32:19 +0530
From: Devi Priya <quic_devipriy@...cinc.com>
To: <agross@...nel.org>, <andersson@...nel.org>,
<konrad.dybcio@...aro.org>, <lpieralisi@...nel.org>,
<kw@...ux.com>, <robh@...nel.org>, <bhelgaas@...gle.com>,
<krzysztof.kozlowski+dt@...aro.org>, <conor+dt@...nel.org>,
<mturquette@...libre.com>, <sboyd@...nel.org>, <mani@...nel.org>,
<linux-arm-msm@...r.kernel.org>, <linux-pci@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-clk@...r.kernel.org>
CC: <quic_srichara@...cinc.com>, <quic_sjaganat@...cinc.com>,
<quic_kathirav@...cinc.com>, <quic_arajkuma@...cinc.com>,
<quic_anusha@...cinc.com>, <quic_ipkumar@...cinc.com>
Subject: [PATCH V4 6/6] PCI: qcom: Add support for IPQ9574
The IPQ9574 platform has 4 Gen3 PCIe controllers: two single-lane
and two dual-lane based on SNPS core 5.70a
The Qcom IP rev is 1.27.0 and Synopsys IP rev is 5.80a
Added a new compatible 'qcom,pcie-ipq9574' and 'ops_1_27_0'
which reuses all the members of 'ops_2_9_0' except for the post_init
as the SLV_ADDR_SPACE_SIZE configuration differs between 2_9_0
and 1_27_0.
Also, modified get_resources of 'ops 2_9_0' to get the clocks
from the device tree and modelled the post init sequence as
a common function to avoid code redundancy.
Co-developed-by: Anusha Rao <quic_anusha@...cinc.com>
Signed-off-by: Anusha Rao <quic_anusha@...cinc.com>
Signed-off-by: Devi Priya <quic_devipriy@...cinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Reviewed-by: Manivannan Sadhasivam <mani@...nel.org>
---
Changes in V4:
- Fixed the if conditional check in qcom_pcie_get_resources_2_9_0
'if (res->clks < 0)' modified to 'if (res->num_clks < 0)'
- Picked up the R-b tags
drivers/pci/controller/dwc/pcie-qcom.c | 57 ++++++++++++++++++--------
1 file changed, 39 insertions(+), 18 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 4ab30892f6ef..c7579dfa5b1c 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -107,6 +107,7 @@
/* PARF_SLV_ADDR_SPACE_SIZE register value */
#define SLV_ADDR_SPACE_SZ 0x10000000
+#define SLV_ADDR_SPACE_SZ_1_27_0 0x08000000
/* PARF_MHI_CLOCK_RESET_CTRL register fields */
#define AHB_CLK_EN BIT(0)
@@ -202,10 +203,10 @@ struct qcom_pcie_resources_2_7_0 {
struct reset_control *rst;
};
-#define QCOM_PCIE_2_9_0_MAX_CLOCKS 5
struct qcom_pcie_resources_2_9_0 {
- struct clk_bulk_data clks[QCOM_PCIE_2_9_0_MAX_CLOCKS];
+ struct clk_bulk_data *clks;
struct reset_control *rst;
+ int num_clks;
};
union qcom_pcie_resources {
@@ -1050,17 +1051,10 @@ static int qcom_pcie_get_resources_2_9_0(struct qcom_pcie *pcie)
struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0;
struct dw_pcie *pci = pcie->pci;
struct device *dev = pci->dev;
- int ret;
-
- res->clks[0].id = "iface";
- res->clks[1].id = "axi_m";
- res->clks[2].id = "axi_s";
- res->clks[3].id = "axi_bridge";
- res->clks[4].id = "rchng";
- ret = devm_clk_bulk_get(dev, ARRAY_SIZE(res->clks), res->clks);
- if (ret < 0)
- return ret;
+ res->num_clks = devm_clk_bulk_get_all(dev, &res->clks);
+ if (res->num_clks < 0)
+ return res->num_clks;
res->rst = devm_reset_control_array_get_exclusive(dev);
if (IS_ERR(res->rst))
@@ -1073,7 +1067,7 @@ static void qcom_pcie_deinit_2_9_0(struct qcom_pcie *pcie)
{
struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0;
- clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks);
+ clk_bulk_disable_unprepare(res->num_clks, res->clks);
}
static int qcom_pcie_init_2_9_0(struct qcom_pcie *pcie)
@@ -1102,19 +1096,16 @@ static int qcom_pcie_init_2_9_0(struct qcom_pcie *pcie)
usleep_range(2000, 2500);
- return clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks);
+ return clk_bulk_prepare_enable(res->num_clks, res->clks);
}
-static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie)
+static int qcom_pcie_post_init(struct qcom_pcie *pcie)
{
struct dw_pcie *pci = pcie->pci;
u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
u32 val;
int i;
- writel(SLV_ADDR_SPACE_SZ,
- pcie->parf + PARF_SLV_ADDR_SPACE_SIZE);
-
val = readl(pcie->parf + PARF_PHY_CTRL);
val &= ~PHY_TEST_PWR_DOWN;
writel(val, pcie->parf + PARF_PHY_CTRL);
@@ -1151,6 +1142,22 @@ static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie)
return 0;
}
+static int qcom_pcie_post_init_1_27_0(struct qcom_pcie *pcie)
+{
+ writel(SLV_ADDR_SPACE_SZ_1_27_0,
+ pcie->parf + PARF_SLV_ADDR_SPACE_SIZE);
+
+ return qcom_pcie_post_init(pcie);
+}
+
+static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie)
+{
+ writel(SLV_ADDR_SPACE_SZ,
+ pcie->parf + PARF_SLV_ADDR_SPACE_SIZE);
+
+ return qcom_pcie_post_init(pcie);
+}
+
static int qcom_pcie_link_up(struct dw_pcie *pci)
{
u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
@@ -1291,6 +1298,15 @@ static const struct qcom_pcie_ops ops_2_9_0 = {
.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
};
+/* Qcom IP rev.: 1.27.0 Synopsys IP rev.: 5.80a */
+static const struct qcom_pcie_ops ops_1_27_0 = {
+ .get_resources = qcom_pcie_get_resources_2_9_0,
+ .init = qcom_pcie_init_2_9_0,
+ .post_init = qcom_pcie_post_init_1_27_0,
+ .deinit = qcom_pcie_deinit_2_9_0,
+ .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
+};
+
static const struct qcom_pcie_cfg cfg_1_0_0 = {
.ops = &ops_1_0_0,
};
@@ -1323,6 +1339,10 @@ static const struct qcom_pcie_cfg cfg_2_9_0 = {
.ops = &ops_2_9_0,
};
+static const struct qcom_pcie_cfg cfg_1_27_0 = {
+ .ops = &ops_1_27_0,
+};
+
static const struct dw_pcie_ops dw_pcie_ops = {
.link_up = qcom_pcie_link_up,
.start_link = qcom_pcie_start_link,
@@ -1607,6 +1627,7 @@ static const struct of_device_id qcom_pcie_match[] = {
{ .compatible = "qcom,pcie-ipq8064-v2", .data = &cfg_2_1_0 },
{ .compatible = "qcom,pcie-ipq8074", .data = &cfg_2_3_3 },
{ .compatible = "qcom,pcie-ipq8074-gen3", .data = &cfg_2_9_0 },
+ { .compatible = "qcom,pcie-ipq9574", .data = &cfg_1_27_0 },
{ .compatible = "qcom,pcie-msm8996", .data = &cfg_2_3_2 },
{ .compatible = "qcom,pcie-qcs404", .data = &cfg_2_4_0 },
{ .compatible = "qcom,pcie-sa8540p", .data = &cfg_1_9_0 },
--
2.17.1
Powered by blists - more mailing lists