linux-kernel - Re: [PATCH] hwmon: (aquacomputer_d5next) Add support for Aquacomputer Leakshield

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 19 May 2023 05:56:24 -0700
From:   Guenter Roeck <linux@...ck-us.net>
To:     Aleksa Savic <savicaleksa83@...il.com>
Cc:     linux-hwmon@...r.kernel.org, main@...ag.de,
        Jack Doan <me@...kdoan.com>, Jean Delvare <jdelvare@...e.com>,
        Jonathan Corbet <corbet@....net>, linux-doc@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH] hwmon: (aquacomputer_d5next) Add support for
 Aquacomputer Leakshield

On Tue, May 16, 2023 at 06:42:13PM +0200, Aleksa Savic wrote:
> Extend aquacomputer_d5next driver to expose various hardware sensors of the
> Aquacomputer Leakshield leak prevention system, which communicates
> through a proprietary USB HID protocol. Implemented by Noah Bergbauer [1].
> 
> Two temperature sensors are exposed, along with pressure (current, min, max
> and target), reservoir volume (total and filled), pump speed and flow. Pump
> speed and flow values are user provided and allow the Leakshield to
> optimize its operation. Writing them to the device is subject of future
> patches.
> 
> [1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/41
> 
> Originally-from: Noah Bergbauer <main@...ag.de>
> Signed-off-by: Aleksa Savic <savicaleksa83@...il.com>
> ---
>  Documentation/hwmon/aquacomputer_d5next.rst |   9 ++
>  drivers/hwmon/aquacomputer_d5next.c         | 117 ++++++++++++++++++--
>  2 files changed, 118 insertions(+), 8 deletions(-)
> 
> diff --git a/Documentation/hwmon/aquacomputer_d5next.rst b/Documentation/hwmon/aquacomputer_d5next.rst
> index 14b37851af0c..94dc2d93d180 100644
> --- a/Documentation/hwmon/aquacomputer_d5next.rst
> +++ b/Documentation/hwmon/aquacomputer_d5next.rst
> @@ -12,6 +12,7 @@ Supported devices:
>  * Aquacomputer Octo fan controller
>  * Aquacomputer Quadro fan controller
>  * Aquacomputer High Flow Next sensor
> +* Aquacomputer Leakshield leak prevention system
>  * Aquacomputer Aquastream XT watercooling pump
>  * Aquacomputer Aquastream Ultimate watercooling pump
>  * Aquacomputer Poweradjust 3 fan controller
> @@ -57,6 +58,11 @@ The High Flow Next exposes +5V voltages, water quality, conductivity and flow re
>  A temperature sensor can be connected to it, in which case it provides its reading
>  and an estimation of the dissipated/absorbed power in the liquid cooling loop.
>  
> +The Leakshield exposes two temperature sensors and coolant pressure (current, min, max and
> +target readings). It also exposes the estimated reservoir volume and how much of it is
> +filled with coolant. Pump RPM and flow can be set to enhance on-device calculations,
> +but this is not yet implemented here.
> +
>  The Aquastream XT pump exposes temperature readings for the coolant, external sensor
>  and fan IC. It also exposes pump and fan speeds (in RPM), voltages, as well as pump
>  current.
> @@ -83,6 +89,9 @@ Sysfs entries
>  temp[1-20]_input Physical/virtual temperature sensors (in millidegrees Celsius)
>  temp[1-8]_offset Temperature sensor correction offset (in millidegrees Celsius)
>  fan[1-8]_input   Pump/fan speed (in RPM) / Flow speed (in dL/h)
> +fan1_min         Minimal fan speed (in RPM)
> +fan1_max         Maximal fan speed (in RPM)
> +fan1_target      Target fan speed (in RPM)
>  fan5_pulses      Quadro flow sensor pulses
>  power[1-8]_input Pump/fan power (in micro Watts)
>  in[0-7]_input    Pump/fan voltage (in milli Volts)
> diff --git a/drivers/hwmon/aquacomputer_d5next.c b/drivers/hwmon/aquacomputer_d5next.c
> index a4fcd4ebf76c..a981f7086114 100644
> --- a/drivers/hwmon/aquacomputer_d5next.c
> +++ b/drivers/hwmon/aquacomputer_d5next.c
> @@ -1,7 +1,7 @@
>  // SPDX-License-Identifier: GPL-2.0+
>  /*
>   * hwmon driver for Aquacomputer devices (D5 Next, Farbwerk, Farbwerk 360, Octo,
> - * Quadro, High Flow Next, Aquaero, Aquastream Ultimate)
> + * Quadro, High Flow Next, Aquaero, Aquastream Ultimate, Leakshield)
>   *
>   * Aquacomputer devices send HID reports (with ID 0x01) every second to report
>   * sensor values, except for devices that communicate through the
> @@ -29,6 +29,7 @@
>  #define USB_PRODUCT_ID_FARBWERK360	0xf010
>  #define USB_PRODUCT_ID_OCTO		0xf011
>  #define USB_PRODUCT_ID_HIGHFLOWNEXT	0xf012
> +#define USB_PRODUCT_ID_LEAKSHIELD	0xf014
>  #define USB_PRODUCT_ID_AQUASTREAMXT	0xf0b6
>  #define USB_PRODUCT_ID_AQUASTREAMULT	0xf00b
>  #define USB_PRODUCT_ID_POWERADJUST3	0xf0bd
> @@ -36,7 +37,7 @@
>  enum kinds {
>  	d5next, farbwerk, farbwerk360, octo, quadro,
>  	highflownext, aquaero, poweradjust3, aquastreamult,
> -	aquastreamxt
> +	aquastreamxt, leakshield
>  };
>  
>  static const char *const aqc_device_names[] = {
> @@ -46,6 +47,7 @@ static const char *const aqc_device_names[] = {
>  	[octo] = "octo",
>  	[quadro] = "quadro",
>  	[highflownext] = "highflownext",
> +	[leakshield] = "leakshield",
>  	[aquastreamxt] = "aquastreamxt",
>  	[aquaero] = "aquaero",
>  	[aquastreamult] = "aquastreamultimate",
> @@ -93,7 +95,7 @@ static u8 aquaero_secondary_ctrl_report[] = {
>  #define AQC_FIRMWARE_VERSION		0xD
>  
>  #define AQC_SENSOR_SIZE			0x02
> -#define AQC_TEMP_SENSOR_DISCONNECTED	0x7FFF
> +#define AQC_SENSOR_NA			0x7FFF

This would have to be a separate change.

Guenter