linux-kernel - [PATCH net-next v2 4/7] net: dsa: mv88e6xxx: add field to specify internal phys layout

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 19 May 2023 16:13:00 +0200
From:   alexis.lothore@...tlin.com
To:     Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>,
        Vladimir Oltean <olteanv@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Richard Cochran <richardcochran@...il.com>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Russell King <linux@...linux.org.uk>
Cc:     netdev@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, thomas.petazzoni@...tlin.com,
        paul.arola@...us.com, scott.roberts@...us.com,
        Marek Behún <kabel@...nel.org>,
        Alexis Lothoré <alexis.lothore@...tlin.com>
Subject: [PATCH net-next v2 4/7] net: dsa: mv88e6xxx: add field to specify internal phys layout

From: Alexis Lothoré <alexis.lothore@...tlin.com>

mv88e6xxx currently assumes that switch equipped with internal phys have
those phys mapped contiguously starting from port 0 (see
mv88e6xxx_phy_is_internal). However, some switches have internal PHYs but
NOT starting from port 0. For example 88e6393X, 88E6193X and 88E6191X have
integrated PHYs available on ports 1 to 8
To properly support this offset, add a new field to allow specifying an
internal PHYs layout. If field is not set, default layout is assumed (start
at port 0)

Signed-off-by: Alexis Lothoré <alexis.lothore@...tlin.com>
---
 drivers/net/dsa/mv88e6xxx/chip.c    | 4 +++-
 drivers/net/dsa/mv88e6xxx/chip.h    | 5 +++++
 drivers/net/dsa/mv88e6xxx/global2.c | 6 +++++-
 3 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index c812e52bb5b7..2716d17c5c49 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -465,7 +465,9 @@ static int mv88e6xxx_port_setup_mac(struct mv88e6xxx_chip *chip, int port,
 
 static int mv88e6xxx_phy_is_internal(struct mv88e6xxx_chip *chip, int port)
 {
-	return port < chip->info->num_internal_phys;
+	return port >= chip->info->internal_phys_offset &&
+		port < chip->info->num_internal_phys +
+			chip->info->internal_phys_offset;
 }
 
 static int mv88e6xxx_port_ppu_updates(struct mv88e6xxx_chip *chip, int port)
diff --git a/drivers/net/dsa/mv88e6xxx/chip.h b/drivers/net/dsa/mv88e6xxx/chip.h
index da6e1339f809..eca51946c100 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.h
+++ b/drivers/net/dsa/mv88e6xxx/chip.h
@@ -167,6 +167,11 @@ struct mv88e6xxx_info {
 
 	/* Supports PTP */
 	bool ptp_support;
+
+	/* Internal PHY start index. 0 means that internal PHYs range starts at
+	 * port 0, 1 means internal PHYs range starts at port 1, etc
+	 */
+	unsigned int internal_phys_offset;
 };
 
 struct mv88e6xxx_atu_entry {
diff --git a/drivers/net/dsa/mv88e6xxx/global2.c b/drivers/net/dsa/mv88e6xxx/global2.c
index 615896893076..d460f7290012 100644
--- a/drivers/net/dsa/mv88e6xxx/global2.c
+++ b/drivers/net/dsa/mv88e6xxx/global2.c
@@ -1198,13 +1198,17 @@ int mv88e6xxx_g2_irq_mdio_setup(struct mv88e6xxx_chip *chip,
 {
 	int phy, irq;
 
-	for (phy = 0; phy < chip->info->num_internal_phys; phy++) {
+	for (phy = chip->info->internal_phys_offset;
+	     phy <
+	     chip->info->num_internal_phys + chip->info->internal_phys_offset;
+	     phy++) {
 		irq = irq_find_mapping(chip->g2_irq.domain, phy);
 		if (irq < 0)
 			return irq;
 
 		bus->irq[chip->info->phy_base_addr + phy] = irq;
 	}
+
 	return 0;
 }
 
-- 
2.40.1