| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230520181750.823365-4-sashal@kernel.org>
Date: Sat, 20 May 2023 14:17:36 -0400
From: Sasha Levin <sashal@...nel.org>
To: linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc: Kan Liang <kan.liang@...ux.intel.com>,
Stephane Eranian <eranian@...gle.com>,
Peter Zijlstra <peterz@...radead.org>,
Sasha Levin <sashal@...nel.org>, mingo@...hat.com,
acme@...nel.org, tglx@...utronix.de, bp@...en8.de,
dave.hansen@...ux.intel.com, x86@...nel.org,
linux-perf-users@...r.kernel.org
Subject: [PATCH AUTOSEL 6.3 04/18] perf/x86/intel/ds: Flush PEBS DS when changing PEBS_DATA_CFG
From: Kan Liang <kan.liang@...ux.intel.com>
[ Upstream commit b752ea0c28e3f7f0aaaad6abf84f735eebc37a60 ]
Several similar kernel warnings can be triggered,
[56605.607840] CPU0 PEBS record size 0, expected 32, config 0 cpuc->record_size=208
when the below commands are running in parallel for a while on SPR.
while true;
do
perf record --no-buildid -a --intr-regs=AX \
-e cpu/event=0xd0,umask=0x81/pp \
-c 10003 -o /dev/null ./triad;
done &
while true;
do
perf record -o /tmp/out -W -d \
-e '{ld_blocks.store_forward:period=1000000, \
MEM_TRANS_RETIRED.LOAD_LATENCY:u:precise=2:ldlat=4}' \
-c 1037 ./triad;
done
The triad program is just the generation of loads/stores.
The warnings are triggered when an unexpected PEBS record (with a
different config and size) is found.
A system-wide PEBS event with the large PEBS config may be enabled
during a context switch. Some PEBS records for the system-wide PEBS
may be generated while the old task is sched out but the new one
hasn't been sched in yet. When the new task is sched in, the
cpuc->pebs_record_size may be updated for the per-task PEBS events. So
the existing system-wide PEBS records have a different size from the
later PEBS records.
The PEBS buffer should be flushed right before the hardware is
reprogrammed. The new size and threshold should be updated after the
old buffer has been flushed.
Reported-by: Stephane Eranian <eranian@...gle.com>
Suggested-by: Peter Zijlstra (Intel) <peterz@...radead.org>
Signed-off-by: Kan Liang <kan.liang@...ux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@...radead.org>
Link: https://lkml.kernel.org/r/20230421184529.3320912-1-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
arch/x86/events/intel/ds.c | 56 ++++++++++++++++++-------------
arch/x86/include/asm/perf_event.h | 3 ++
2 files changed, 35 insertions(+), 24 deletions(-)
diff --git a/arch/x86/events/intel/ds.c b/arch/x86/events/intel/ds.c
index a2e566e53076e..df88576d6b2a5 100644
--- a/arch/x86/events/intel/ds.c
+++ b/arch/x86/events/intel/ds.c
@@ -1229,12 +1229,14 @@ pebs_update_state(bool needed_cb, struct cpu_hw_events *cpuc,
struct perf_event *event, bool add)
{
struct pmu *pmu = event->pmu;
+
/*
* Make sure we get updated with the first PEBS
* event. It will trigger also during removal, but
* that does not hurt:
*/
- bool update = cpuc->n_pebs == 1;
+ if (cpuc->n_pebs == 1)
+ cpuc->pebs_data_cfg = PEBS_UPDATE_DS_SW;
if (needed_cb != pebs_needs_sched_cb(cpuc)) {
if (!needed_cb)
@@ -1242,7 +1244,7 @@ pebs_update_state(bool needed_cb, struct cpu_hw_events *cpuc,
else
perf_sched_cb_dec(pmu);
- update = true;
+ cpuc->pebs_data_cfg |= PEBS_UPDATE_DS_SW;
}
/*
@@ -1252,24 +1254,13 @@ pebs_update_state(bool needed_cb, struct cpu_hw_events *cpuc,
if (x86_pmu.intel_cap.pebs_baseline && add) {
u64 pebs_data_cfg;
- /* Clear pebs_data_cfg and pebs_record_size for first PEBS. */
- if (cpuc->n_pebs == 1) {
- cpuc->pebs_data_cfg = 0;
- cpuc->pebs_record_size = sizeof(struct pebs_basic);
- }
-
pebs_data_cfg = pebs_update_adaptive_cfg(event);
-
- /* Update pebs_record_size if new event requires more data. */
- if (pebs_data_cfg & ~cpuc->pebs_data_cfg) {
- cpuc->pebs_data_cfg |= pebs_data_cfg;
- adaptive_pebs_record_size_update();
- update = true;
- }
+ /*
+ * Be sure to update the thresholds when we change the record.
+ */
+ if (pebs_data_cfg & ~cpuc->pebs_data_cfg)
+ cpuc->pebs_data_cfg |= pebs_data_cfg | PEBS_UPDATE_DS_SW;
}
-
- if (update)
- pebs_update_threshold(cpuc);
}
void intel_pmu_pebs_add(struct perf_event *event)
@@ -1326,9 +1317,17 @@ static void intel_pmu_pebs_via_pt_enable(struct perf_event *event)
wrmsrl(base + idx, value);
}
+static inline void intel_pmu_drain_large_pebs(struct cpu_hw_events *cpuc)
+{
+ if (cpuc->n_pebs == cpuc->n_large_pebs &&
+ cpuc->n_pebs != cpuc->n_pebs_via_pt)
+ intel_pmu_drain_pebs_buffer();
+}
+
void intel_pmu_pebs_enable(struct perf_event *event)
{
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+ u64 pebs_data_cfg = cpuc->pebs_data_cfg & ~PEBS_UPDATE_DS_SW;
struct hw_perf_event *hwc = &event->hw;
struct debug_store *ds = cpuc->ds;
unsigned int idx = hwc->idx;
@@ -1344,11 +1343,22 @@ void intel_pmu_pebs_enable(struct perf_event *event)
if (x86_pmu.intel_cap.pebs_baseline) {
hwc->config |= ICL_EVENTSEL_ADAPTIVE;
- if (cpuc->pebs_data_cfg != cpuc->active_pebs_data_cfg) {
- wrmsrl(MSR_PEBS_DATA_CFG, cpuc->pebs_data_cfg);
- cpuc->active_pebs_data_cfg = cpuc->pebs_data_cfg;
+ if (pebs_data_cfg != cpuc->active_pebs_data_cfg) {
+ /*
+ * drain_pebs() assumes uniform record size;
+ * hence we need to drain when changing said
+ * size.
+ */
+ intel_pmu_drain_large_pebs(cpuc);
+ adaptive_pebs_record_size_update();
+ wrmsrl(MSR_PEBS_DATA_CFG, pebs_data_cfg);
+ cpuc->active_pebs_data_cfg = pebs_data_cfg;
}
}
+ if (cpuc->pebs_data_cfg & PEBS_UPDATE_DS_SW) {
+ cpuc->pebs_data_cfg = pebs_data_cfg;
+ pebs_update_threshold(cpuc);
+ }
if (idx >= INTEL_PMC_IDX_FIXED) {
if (x86_pmu.intel_cap.pebs_format < 5)
@@ -1391,9 +1401,7 @@ void intel_pmu_pebs_disable(struct perf_event *event)
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
struct hw_perf_event *hwc = &event->hw;
- if (cpuc->n_pebs == cpuc->n_large_pebs &&
- cpuc->n_pebs != cpuc->n_pebs_via_pt)
- intel_pmu_drain_pebs_buffer();
+ intel_pmu_drain_large_pebs(cpuc);
cpuc->pebs_enabled &= ~(1ULL << hwc->idx);
diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h
index 8fc15ed5e60bb..abf09882f58b6 100644
--- a/arch/x86/include/asm/perf_event.h
+++ b/arch/x86/include/asm/perf_event.h
@@ -121,6 +121,9 @@
#define PEBS_DATACFG_LBRS BIT_ULL(3)
#define PEBS_DATACFG_LBR_SHIFT 24
+/* Steal the highest bit of pebs_data_cfg for SW usage */
+#define PEBS_UPDATE_DS_SW BIT_ULL(63)
+
/*
* Intel "Architectural Performance Monitoring" CPUID
* detection/enumeration details:
--
2.39.2
Powered by blists - more mailing lists