[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <9526dc43-8c69-b819-af75-02155e60e236@quicinc.com>
Date: Sun, 21 May 2023 21:35:36 +0530
From: Manikanta Mylavarapu <quic_mmanikan@...cinc.com>
To: Varadarajan Narayanan <quic_varada@...cinc.com>,
<agross@...nel.org>, <andersson@...nel.org>,
<konrad.dybcio@...aro.org>, <robh+dt@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>, <jassisinghbrar@...il.com>,
<mathieu.poirier@...aro.org>, <mturquette@...libre.com>,
<sboyd@...nel.org>, <quic_gurus@...cinc.com>,
<loic.poulain@...aro.org>, <quic_eberman@...cinc.com>,
<robimarko@...il.com>, <linux-arm-msm@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-remoteproc@...r.kernel.org>, <linux-clk@...r.kernel.org>
CC: <quic_srichara@...cinc.com>, <quic_gokulsri@...cinc.com>,
<quic_sjaganat@...cinc.com>, <quic_kathirav@...cinc.com>,
<quic_arajkuma@...cinc.com>, <quic_anusha@...cinc.com>,
<quic_poovendh@...cinc.com>
Subject: Re: [PATCH 10/11] arm64: dts: qcom: ipq5018: Add MP03.5-c1 board
support
On 3/7/2023 11:55 AM, Varadarajan Narayanan wrote:
>
> On 3/7/2023 10:11 AM, Manikanta Mylavarapu wrote:
>> Add initial device tree support for the MP03.5-C1 board.
>>
>> Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@...cinc.com>
>> ---
>> arch/arm64/boot/dts/qcom/Makefile | 1 +
>> .../arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts | 64 +++++++++++++++++++
>> 2 files changed, 65 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts
>>
>> diff --git a/arch/arm64/boot/dts/qcom/Makefile
>> b/arch/arm64/boot/dts/qcom/Makefile
>> index b77a95e97a56..10d1eafe57e4 100644
>> --- a/arch/arm64/boot/dts/qcom/Makefile
>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>> @@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_QCOM) +=
>> apq8094-sony-xperia-kitakami-karin_windy.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += ipq5018-mp03.1-c2.dtb
>> +dtb-$(CONFIG_ARCH_QCOM) += ipq5018-mp03.5-c1.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb
>> diff --git a/arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts
>> b/arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts
>> new file mode 100644
>> index 000000000000..51ddd7367ac6
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts
>> @@ -0,0 +1,64 @@
>> +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
>> +/*
>> + * IPQ5018 CP01 board device tree source
> MP03??
I will change to IPQ5018-RDP432-C1
>> + *
>> + * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved.
>
> Update the year
> > -Varada
>
I will update.
Thanks & Regards,
Manikanta.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "ipq5018.dtsi"
>> +
>> +/ {
>> + model = "Qualcomm Technologies, Inc. IPQ5018/AP-MP03.5-C1";
>> + compatible = "qcom,ipq5018-mp03.5-c1", "qcom,ipq5018";
>> +
>> + aliases {
>> + serial0 = &blsp1_uart1;
>> + };
>> +
>> + chosen {
>> + bootargs = "console=ttyMSM0,115200,n8 rw init=/init swiotlb=1
>> coherent_pool=2M";
>> + stdout-path = "serial0:115200n8";
>> + };
>> +};
>> +
>> +&tlmm {
>> + blsp0_uart_pins: uart_pins {
>> + pins = "gpio20", "gpio21";
>> + function = "blsp0_uart0";
>> + bias-disable;
>> + };
>> +};
>> +
>> +&blsp1_uart1 {
>> + pinctrl-0 = <&blsp0_uart_pins>;
>> + pinctrl-names = "default";
>> + status = "ok";
>> +};
>> +
>> +&q6v5_wcss {
>> + q6_wcss_pd1: remoteproc_pd1 {
>> + interrupts-extended = <&wcss_smp2p_in 8 0>,
>> + <&wcss_smp2p_in 9 0>,
>> + <&wcss_smp2p_in 12 0>,
>> + <&wcss_smp2p_in 11 0>;
>> + interrupt-names = "fatal",
>> + "ready",
>> + "spawn-ack",
>> + "stop-ack";
>> + qcom,smem-states = <&wcss_smp2p_out 8>,
>> + <&wcss_smp2p_out 9>,
>> + <&wcss_smp2p_out 10>;
>> + qcom,smem-state-names = "shutdown",
>> + "stop",
>> + "spawn";
>> + };
>> + q6_wcss_pd2: remoteproc_pd2 {
>> + status = "okay";
>> + };
>> +
>> + q6_wcss_pd3: remoteproc_pd3 {
>> + status = "okay";
>> + };
>> +};
Powered by blists - more mailing lists