[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <9368fb33-9718-a2a0-4c3c-ca3f568bf484@quicinc.com>
Date: Sun, 21 May 2023 21:42:47 +0530
From: Manikanta Mylavarapu <quic_mmanikan@...cinc.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
<agross@...nel.org>, <andersson@...nel.org>,
<konrad.dybcio@...aro.org>, <robh+dt@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>, <jassisinghbrar@...il.com>,
<mathieu.poirier@...aro.org>, <mturquette@...libre.com>,
<sboyd@...nel.org>, <quic_gurus@...cinc.com>,
<loic.poulain@...aro.org>, <quic_eberman@...cinc.com>,
<robimarko@...il.com>, <linux-arm-msm@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-remoteproc@...r.kernel.org>, <linux-clk@...r.kernel.org>
CC: <quic_srichara@...cinc.com>, <quic_gokulsri@...cinc.com>,
<quic_sjaganat@...cinc.com>, <quic_kathirav@...cinc.com>,
<quic_arajkuma@...cinc.com>, <quic_anusha@...cinc.com>,
<quic_poovendh@...cinc.com>
Subject: Re: [PATCH 10/11] arm64: dts: qcom: ipq5018: Add MP03.5-c1 board
support
On 3/7/2023 9:12 PM, Krzysztof Kozlowski wrote:
> On 07/03/2023 05:41, Manikanta Mylavarapu wrote:
>> Add initial device tree support for the MP03.5-C1 board.
>>
>> Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@...cinc.com>
>> ---
>> arch/arm64/boot/dts/qcom/Makefile | 1 +
>> .../arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts | 64 +++++++++++++++++++
>> 2 files changed, 65 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts
>>
>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>> index b77a95e97a56..10d1eafe57e4 100644
>> --- a/arch/arm64/boot/dts/qcom/Makefile
>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>> @@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += ipq5018-mp03.1-c2.dtb
>> +dtb-$(CONFIG_ARCH_QCOM) += ipq5018-mp03.5-c1.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb
>> diff --git a/arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts b/arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts
>> new file mode 100644
>> index 000000000000..51ddd7367ac6
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts
>> @@ -0,0 +1,64 @@
>> +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
>> +/*
>> + * IPQ5018 CP01 board device tree source
>> + *
>> + * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "ipq5018.dtsi"
>> +
>> +/ {
>> + model = "Qualcomm Technologies, Inc. IPQ5018/AP-MP03.5-C1";
>> + compatible = "qcom,ipq5018-mp03.5-c1", "qcom,ipq5018";
>> +
>> + aliases {
>> + serial0 = &blsp1_uart1;
>> + };
>> +
>> + chosen {
>> + bootargs = "console=ttyMSM0,115200,n8 rw init=/init swiotlb=1 coherent_pool=2M";
>
> Not a common DT property. Drop.
>
Sure, i will drop it.
>> + stdout-path = "serial0:115200n8";
>> + };
>> +};
>> +
>> +&tlmm {
>> + blsp0_uart_pins: uart_pins {
>
> Does not look like you tested the DTS against bindings. Please run `make
> dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst
> for instructions).
>
> I'll stop the review. Please first run tests.
>
>
I will verify DTS against bindings.
Thanks & Regards,
Manikanta.
>
> Best regards,
> Krzysztof
>
Powered by blists - more mailing lists