linux-kernel - [PATCH 2/2] arm64: dts: imx8mn-beacon: Fix SPI CS pinmux

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Sun, 21 May 2023 18:10:55 -0500
From:   Adam Ford <aford173@...il.com>
To:     linux-arm-kernel@...ts.infradead.org
Cc:     aford@...conembedded.com, Adam Ford <aford173@...il.com>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Shawn Guo <shawnguo@...nel.org>,
        Sascha Hauer <s.hauer@...gutronix.de>,
        Pengutronix Kernel Team <kernel@...gutronix.de>,
        Fabio Estevam <festevam@...il.com>,
        NXP Linux Team <linux-imx@....com>,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH 2/2] arm64: dts: imx8mn-beacon: Fix SPI CS pinmux

The final production baseboard had a different chip select than
earlier prototype boards.  When the newer board was released,
the SPI stopped working because the wrong pin was used in the device
tree and conflicted with the UART RTS. Fix the pinmux for
production boards.

Fixes: 36ca3c8ccb53 ("arm64: dts: imx: Add Beacon i.MX8M Nano development kit")
Signed-off-by: Adam Ford <aford173@...il.com>

diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
index 9e82069c941f..d38745237d3c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
@@ -63,25 +63,35 @@ reg_usb_otg_vbus: regulator-usb {
 		enable-active-high;
 	};
 
-	sound {
-		compatible = "fsl,imx-audio-wm8962";
-		model = "wm8962-audio";
-		audio-cpu = <&sai3>;
-		audio-codec = <&wm8962>;
-		audio-routing =
-			"Headphone Jack", "HPOUTL",
-			"Headphone Jack", "HPOUTR",
-			"Ext Spk", "SPKOUTL",
-			"Ext Spk", "SPKOUTR",
-			"AMIC", "MICBIAS",
-			"IN3R", "AMIC";
+	sound-wm8962 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "wm8962";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets = "Headphone", "Headphones",
+					    "Microphone", "Headset Mic",
+					    "Speaker", "Speaker";
+		simple-audio-card,routing = "Headphones", "HPOUTL",
+					    "Headphones", "HPOUTR",
+					    "Speaker", "SPKOUTL",
+					    "Speaker", "SPKOUTR",
+					    "Headset Mic", "MICBIAS",
+					    "IN3R", "Headset Mic";
+		simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+		};
+		simple-audio-card,codec {
+			sound-dai = <&wm8962>;
+			clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
+			frame-master;
+			bitclock-master;
+		};
 	};
 };
 
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_espi2>;
-	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	eeprom@0 {
@@ -142,6 +152,7 @@ wm8962: audio-codec@1a {
 			0x0000 /* 4:FN_DMICCDAT */
 			0x0000 /* 5:Default */
 		>;
+		#sound-dai-cells = <0>;
 	};
 };
 
@@ -202,7 +213,7 @@ pinctrl_espi2: espi2grp {
 			MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82
 			MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82
 			MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82
-			MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x41
+			MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x41
 		>;
 	};
 
-- 
2.39.2