[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <6rip5brx7pu63f4b56zsa6xmilbhxswybxjuc2wrkukvvhlnjv@dxrhp6iywpoq>
Date: Mon, 22 May 2023 22:54:04 +0200
From: Marijn Suijten <marijn.suijten@...ainline.org>
To: Jessica Zhang <quic_jesszhan@...cinc.com>
Cc: Rob Clark <robdclark@...il.com>,
Abhinav Kumar <quic_abhinavk@...cinc.com>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
Sean Paul <sean@...rly.run>, David Airlie <airlied@...il.com>,
Daniel Vetter <daniel@...ll.ch>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
linux-arm-msm@...r.kernel.org, dri-devel@...ts.freedesktop.org,
freedreno@...ts.freedesktop.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v4 4/5] drm/msm/dpu: Set DATA_COMPRESS for command mode
How about: Enable INTF DATA_COMPRESS bit (on cmdmode) for DCE/DSC 1.2?
Drop parenthesis at your convenience.
On 2023-05-22 13:30:23, Jessica Zhang wrote:
> Add a DPU INTF op to set DATA_COMPRESS register if the
> DPU_INTF_DATA_COMPRESS feature is enabled. This bit needs to be set in
> order for DSC v1.2 to work.
"in order for .. to work" sounds like bugfixing... How about just:
"set the DCE_DATA_COMPRESS bit to enable the DCE/DSC 1.2 datapath",
which I think is what it is doing? Everyone seems to favour the
"datapath" word anyway :)
> Note: For now, this op is called for command mode encoders only. Changes to
> set DATA_COMPRESS for video mode encoders will be posted along with DSC
> v1.2 support for DP.
>
> Signed-off-by: Jessica Zhang <quic_jesszhan@...cinc.com>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c | 3 +++
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c | 13 +++++++++++++
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h | 2 ++
> 3 files changed, 18 insertions(+)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
> index d8ed85a238af..1a4c20f02312 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
> @@ -68,6 +68,9 @@ static void _dpu_encoder_phys_cmd_update_intf_cfg(
> phys_enc->hw_intf,
> true,
> phys_enc->hw_pp->idx);
> +
> + if (phys_enc->hw_intf->ops.enable_compression)
> + phys_enc->hw_intf->ops.enable_compression(phys_enc->hw_intf);
> }
>
> static void dpu_encoder_phys_cmd_pp_tx_done_irq(void *arg, int irq_idx)
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
> index 6485500eedb8..a462c6780e6e 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
> @@ -91,6 +91,7 @@
>
> #define INTF_CFG2_DATABUS_WIDEN BIT(0)
> #define INTF_CFG2_DATA_HCTL_EN BIT(4)
> +#define INTF_CFG2_DCE_DATA_COMPRESS BIT(12)
>
> static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx,
> const struct intf_timing_params *p,
> @@ -522,6 +523,15 @@ static void dpu_hw_intf_disable_autorefresh(struct dpu_hw_intf *intf,
>
> }
>
> +static void dpu_hw_intf_enable_compression(struct dpu_hw_intf *ctx)
> +{
> + u32 intf_cfg2 = DPU_REG_READ(&ctx->hw, INTF_CONFIG2);
> +
> + intf_cfg2 |= INTF_CFG2_DCE_DATA_COMPRESS;
> +
> + DPU_REG_WRITE(&ctx->hw, INTF_CONFIG2, intf_cfg2);
> +}
> +
> static void _setup_intf_ops(struct dpu_hw_intf_ops *ops,
> unsigned long cap)
> {
> @@ -542,6 +552,9 @@ static void _setup_intf_ops(struct dpu_hw_intf_ops *ops,
> ops->vsync_sel = dpu_hw_intf_vsync_sel;
> ops->disable_autorefresh = dpu_hw_intf_disable_autorefresh;
> }
> +
> + if (cap & BIT(DPU_INTF_DATA_COMPRESS))
> + ops->enable_compression = dpu_hw_intf_enable_compression;
> }
>
> struct dpu_hw_intf *dpu_hw_intf_init(const struct dpu_intf_cfg *cfg,
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h
> index 73b0885918f8..72fe907729f1 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h
> @@ -70,6 +70,7 @@ struct intf_status {
> * @get_autorefresh: Retrieve autorefresh config from hardware
> * Return: 0 on success, -ETIMEDOUT on timeout
> * @vsync_sel: Select vsync signal for tear-effect configuration
> + * @enable_compression: Enable data compression
> */
> struct dpu_hw_intf_ops {
> void (*setup_timing_gen)(struct dpu_hw_intf *intf,
> @@ -107,6 +108,7 @@ struct dpu_hw_intf_ops {
> * Disable autorefresh if enabled
> */
> void (*disable_autorefresh)(struct dpu_hw_intf *intf, uint32_t encoder_id, u16 vdisplay);
Newline here.
For the contents of the patch though:
Reviewed-by: Marijn Suijten <marijn.suijten@...ainline.org>
> + void (*enable_compression)(struct dpu_hw_intf *intf);
> };
>
> struct dpu_hw_intf {
>
> --
> 2.40.1
>
Powered by blists - more mailing lists