[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <8241a7ed-6c02-df96-fdcf-39339f50a6e0@microchip.com>
Date: Mon, 22 May 2023 11:22:02 +0200
From: Nicolas Ferre <nicolas.ferre@...rochip.com>
To: <Ryan.Wanner@...rochip.com>, <robh+dt@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>, <conor+dt@...nel.org>,
<alexandre.belloni@...tlin.com>, <claudiu.beznea@...rochip.com>,
<linus.walleij@...aro.org>, <ludovic.desroches@...rochip.com>
CC: <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <linux-gpio@...r.kernel.org>
Subject: Re: [PATCH 3/3] ARM: dts: at91: Return to boolean properties
On 17/05/2023 at 13:54, Ryan.Wanner@...rochip.com wrote:
> From: Ryan Wanner <Ryan.Wanner@...rochip.com>
>
> Returning back to commit 0dc23d1a8e17
> ("arm: dts: at91: Fix boolean properties with values") as pinctrl driver no
> longer expects an integer value and expects a simple boolean property.
>
> Signed-off-by: Ryan Wanner <Ryan.Wanner@...rochip.com>
Okay:
Acked-by: Nicolas Ferre <nicolas.ferre@...rochip.com>
Thanks for fixing this as well. Best regards,
Nicolas
> ---
> arch/arm/boot/dts/at91-kizbox3-hs.dts | 2 +-
> arch/arm/boot/dts/at91-kizbox3_common.dtsi | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/at91-kizbox3-hs.dts b/arch/arm/boot/dts/at91-kizbox3-hs.dts
> index 7075df6549e9..fec7269088d1 100644
> --- a/arch/arm/boot/dts/at91-kizbox3-hs.dts
> +++ b/arch/arm/boot/dts/at91-kizbox3-hs.dts
> @@ -225,7 +225,7 @@ pinctrl_pio_zbe_rst: gpio_zbe_rst {
> pinctrl_pio_io_reset: gpio_io_reset {
> pinmux = <PIN_PB30__GPIO>;
> bias-disable;
> - drive-open-drain = <1>;
> + drive-open-drain;
> output-low;
> };
> pinctrl_pio_input: gpio_input {
> diff --git a/arch/arm/boot/dts/at91-kizbox3_common.dtsi b/arch/arm/boot/dts/at91-kizbox3_common.dtsi
> index abe27adfa4d6..465664628419 100644
> --- a/arch/arm/boot/dts/at91-kizbox3_common.dtsi
> +++ b/arch/arm/boot/dts/at91-kizbox3_common.dtsi
> @@ -211,7 +211,7 @@ pinctrl_flx4_default: flx4_i2c6_default {
> pinmux = <PIN_PD12__FLEXCOM4_IO0>, //DATA
> <PIN_PD13__FLEXCOM4_IO1>; //CLK
> bias-disable;
> - drive-open-drain = <1>;
> + drive-open-drain;
> };
>
> pinctrl_pwm0 {
--
Nicolas Ferre
Powered by blists - more mailing lists