linux-kernel - Re: [PATCH v2 3/4] arm64: dts: qcom: qdu1000: Add SDHCI1 pin configuration to DTSI

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAH=2NtzBWjAuJ2mvtnBzDkhMXk+MZX_KwE-8U9CW42fQL+SBGA@mail.gmail.com>
Date:   Mon, 22 May 2023 15:19:45 +0530
From:   Bhupesh Sharma <bhupesh.sharma@...aro.org>
To:     Komal Bajaj <quic_kbajaj@...cinc.com>
Cc:     Ulf Hansson <ulf.hansson@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konrad.dybcio@...aro.org>,
        linux-mmc@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org
Subject: Re: [PATCH v2 3/4] arm64: dts: qcom: qdu1000: Add SDHCI1 pin
 configuration to DTSI

On Mon, 22 May 2023 at 15:06, Komal Bajaj <quic_kbajaj@...cinc.com> wrote:
>
> Add required pins for SDHCI1, so that the interface can work reliably.
>
> Reviewed-by: Bhupesh Sharma <bhupesh.sharma@...aro.org>wq

Err.. an extra wq .. I think this can be fixed while applying, so
should not require a new version.

Thanks,
Bhupesh

> Signed-off-by: Komal Bajaj <quic_kbajaj@...cinc.com>
> ---
>  arch/arm64/boot/dts/qcom/qdu1000.dtsi | 50 +++++++++++++++++++++++++++
>  1 file changed, 50 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> index 38ee7115a35f..6f23cbfc024c 100644
> --- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> @@ -1151,6 +1151,56 @@
>                                 pins = "gpio31";
>                                 function = "gpio";
>                         };
> +
> +                       sdc1_on_state: sdc1-on-state {
> +                               clk-pins {
> +                                       pins = "sdc1_clk";
> +                                       drive-strength = <16>;
> +                                       bias-disable;
> +                               };
> +
> +                               cmd-pins {
> +                                       pins = "sdc1_cmd";
> +                                       drive-strength = <10>;
> +                                       bias-pull-up;
> +                               };
> +
> +                               data-pins {
> +                                       pins = "sdc1_data";
> +                                       drive-strength = <10>;
> +                                       bias-pull-up;
> +                               };
> +
> +                               rclk-pins {
> +                                       pins = "sdc1_rclk";
> +                                       bias-pull-down;
> +                               };
> +                       };
> +
> +                       sdc1_off_state: sdc1-off-state {
> +                               clk-pins {
> +                                       pins = "sdc1_clk";
> +                                       drive-strength = <2>;
> +                                       bias-disable;
> +                               };
> +
> +                               cmd-pins {
> +                                       pins = "sdc1_cmd";
> +                                       drive-strength = <2>;
> +                                       bias-pull-up;
> +                               };
> +
> +                               data-pins {
> +                                       pins = "sdc1_data";
> +                                       drive-strength = <2>;
> +                                       bias-pull-up;
> +                               };
> +
> +                               rclk-pins {
> +                                       pins = "sdc1_rclk";
> +                                       bias-pull-down;
> +                               };
> +                       };
>                 };
>
>                 apps_smmu: iommu@...00000 {
> --
> 2.17.1
>