lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230522095833.otk2nv24plmvarpt@skbuf>
Date:   Mon, 22 May 2023 12:58:33 +0300
From:   Vladimir Oltean <olteanv@...il.com>
To:     David Epping <david.epping@...singlinkelectronics.com>
Cc:     Andrew Lunn <andrew@...n.ch>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Russell King <linux@...linux.org.uk>,
        "David S . Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org, UNGLinuxDriver@...rochip.com
Subject: Re: [PATCH net 3/3] net: phy: mscc: enable VSC8501/2 RGMII RX clock

On Sun, May 21, 2023 at 06:16:50PM +0200, David Epping wrote:
> Since we found an explanation why the current driver works in some
> setups (U-Boot), I would go with the Microchip support statement, that
> writing bit 11 to 0 is required in all modes.
> It would thus stay a separate function, called without a phy mode
> condition, and not be combined with the RGMII skew setting function.

If you still prefer to write twice in a row to the same paged register
instead of combining the changes, then fine by me, it's not a huge deal.

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ