[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230522113331.36872-1-Parthiban.Veerasooran@microchip.com>
Date: Mon, 22 May 2023 17:03:25 +0530
From: Parthiban Veerasooran <Parthiban.Veerasooran@...rochip.com>
To: <andrew@...n.ch>, <hkallweit1@...il.com>, <linux@...linux.org.uk>,
<davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
<pabeni@...hat.com>, <netdev@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
<ramon.nordin.rodriguez@...roamp.se>
CC: <horatiu.vultur@...rochip.com>, <Woojung.Huh@...rochip.com>,
<Nicolas.Ferre@...rochip.com>, <Thorsten.Kummermehr@...rochip.com>,
"Parthiban Veerasooran" <Parthiban.Veerasooran@...rochip.com>
Subject: [PATCH net-next v2 0/6] microchip_t1s: Update on Microchip 10BASE-T1S PHY driver
This patch series contain the below updates,
- Fixes on the Microchip LAN8670/1/2 10BASE-T1S PHYs support in the
net/phy/microchip_t1s.c driver.
- Adds support for the Microchip LAN8650/1 Rev.B0 10BASE-T1S Internal
PHYs in the net/phy/microchip_t1s.c driver.
Changes:
v2:
- Updated cover letter contents.
- Modified driver description is more generic as it is common for all the
Microchip 10BASE-T1S PHYs.
- Replaced read-modify-write code with phy_modify_mmd function.
- Moved */ to the same line for the single line comments.
- Changed the type int to u16 for LAN865X Rev.B0 fixup registers
declaration.
- Changed all the comments starting letter to upper case for the
consistency.
- Removed return value check of phy_read_mmd and returned directly in the
last line of the function lan865x_revb0_indirect_read.
- Used reverse christmas notation wherever is possible.
- Used FIELD_PREP instead of << in all the places.
- Used 4 byte representation for all the register addresses and values
for consistency.
- Comment for indirect read is modified.
- Implemented "Reset Complete" status polling in config_init.
- Function lan865x_setup_cfgparam is split into multiple functions for
readability.
- Reference to AN1760 document is added in the comment.
- Removed interrupt disabling code as it is not needed.
- Provided meaningful macros for the LAN865X Rev.B0 indirect read
registers and control.
- Replaced 0x10 with BIT(4).
- Removed collision detection disable/enable code as it can be done with
a separate patch later.
Parthiban Veerasooran (6):
net: phy: microchip_t1s: modify driver description to be more generic
net: phy: microchip_t1s: replace read-modify-write code with
phy_modify_mmd
net: phy: microchip_t1s: update LAN867x PHY supported revision number
net: phy: microchip_t1s: fix reset complete status handling
net: phy: microchip_t1s: remove unnecessary interrupts disabling code
net: phy: microchip_t1s: add support for Microchip LAN865x Rev.B0 PHYs
drivers/net/phy/microchip_t1s.c | 265 +++++++++++++++++++++++++++-----
1 file changed, 226 insertions(+), 39 deletions(-)
--
2.34.1
Powered by blists - more mailing lists