[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230522113331.36872-6-Parthiban.Veerasooran@microchip.com>
Date: Mon, 22 May 2023 17:03:30 +0530
From: Parthiban Veerasooran <Parthiban.Veerasooran@...rochip.com>
To: <andrew@...n.ch>, <hkallweit1@...il.com>, <linux@...linux.org.uk>,
<davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
<pabeni@...hat.com>, <netdev@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
<ramon.nordin.rodriguez@...roamp.se>
CC: <horatiu.vultur@...rochip.com>, <Woojung.Huh@...rochip.com>,
<Nicolas.Ferre@...rochip.com>, <Thorsten.Kummermehr@...rochip.com>,
"Parthiban Veerasooran" <Parthiban.Veerasooran@...rochip.com>
Subject: [PATCH net-next v2 5/6] net: phy: microchip_t1s: remove unnecessary interrupts disabling code
By default, except Reset Complete interrupt in the Interrupt Mask 2
Register all other interrupts are disabled/masked. As Reset Complete
status is already handled, it doesn't make sense to disable it.
Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@...rochip.com>
---
drivers/net/phy/microchip_t1s.c | 14 +-------------
1 file changed, 1 insertion(+), 13 deletions(-)
diff --git a/drivers/net/phy/microchip_t1s.c b/drivers/net/phy/microchip_t1s.c
index 2f22a1954c09..a612f7867df8 100644
--- a/drivers/net/phy/microchip_t1s.c
+++ b/drivers/net/phy/microchip_t1s.c
@@ -12,8 +12,6 @@
#define PHY_ID_LAN867X_REVB1 0x0007C162
-#define LAN867X_REG_IRQ_1_CTL 0x001C
-#define LAN867X_REG_IRQ_2_CTL 0x001D
#define LAN867X_REG_STS2 0x0019
#define LAN867x_RESET_COMPLETE_STS BIT(11)
@@ -104,17 +102,7 @@ static int lan867x_revb1_config_init(struct phy_device *phydev)
return err;
}
- /* None of the interrupts in the lan867x phy seem relevant.
- * Other phys inspect the link status and call phy_trigger_machine
- * in the interrupt handler.
- * This phy does not support link status, and thus has no interrupt
- * for it either.
- * So we'll just disable all interrupts on the chip.
- */
- err = phy_write_mmd(phydev, MDIO_MMD_VEND2, LAN867X_REG_IRQ_1_CTL, 0xFFFF);
- if (err != 0)
- return err;
- return phy_write_mmd(phydev, MDIO_MMD_VEND2, LAN867X_REG_IRQ_2_CTL, 0xFFFF);
+ return 0;
}
static int lan867x_read_status(struct phy_device *phydev)
--
2.34.1
Powered by blists - more mailing lists