linux-kernel - [PATCH net-next 28/30] net: dsa: mt7530: introduce LLDP frame trapping

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230522121532.86610-29-arinc.unal@arinc9.com>
Date:   Mon, 22 May 2023 15:15:30 +0300
From:   arinc9.unal@...il.com
To:     Sean Wang <sean.wang@...iatek.com>,
        Landen Chao <Landen.Chao@...iatek.com>,
        DENG Qingfang <dqfext@...il.com>,
        Daniel Golle <daniel@...rotopia.org>,
        Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>,
        Vladimir Oltean <olteanv@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Matthias Brugger <matthias.bgg@...il.com>,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@...labora.com>,
        Russell King <linux@...linux.org.uk>
Cc:     Arınç ÜNAL <arinc.unal@...nc9.com>,
        Richard van Schagen <richard@...terhints.com>,
        Richard van Schagen <vschagen@...com>,
        Frank Wunderlich <frank-w@...lic-files.de>,
        Bartel Eerdekens <bartel.eerdekens@...stell8.be>,
        erkin.bozoglu@...ont.com, mithat.guner@...ont.com,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        linux-mediatek@...ts.infradead.org
Subject: [PATCH net-next 28/30] net: dsa: mt7530: introduce LLDP frame trapping

From: Arınç ÜNAL <arinc.unal@...nc9.com>

The MT753X switches are capable of trapping certain frames. Introduce
trapping LLDP frames to the CPU port(s) for the MT753X switches.

For MT7530, LLDP frames will be trapped to the numerically smallest CPU
port which is affine to the DSA conduit interface that is set up. The LLDP
frames won't necessarily be trapped to the CPU port the user port, which
these LLDP frames are received from, is affine to.

For MT7531 and the switch on the MT7988 SoC, LLDP frames will be trapped to
the CPU port the user port is affine to.

The bit for R0E_MANG_FR is 27. When set, the switch regards the frames with
:0E MAC DA as management (LLDP) frames. This bit is set to 1 after reset on
MT7530 and MT7531 according to the documents MT7620 Programming Guide v1.0
and MT7531 Reference Manual for Development Board v1.0, so there's no need
to deal with this bit. Since there's currently no public document for the
switch on the MT7988 SoC, I assume this is also the case for this switch.

Remove the ETHSYS_CLKCFG0 register which doesn't exist on the said
documents, and conflicts with the MT753X_RGAC2 register.

The mt753x_bpdu_port_fw enum is universally used for trapping frames,
therefore rename it and the values in it to mt753x_port_fw.

Tested-by: Arınç ÜNAL <arinc.unal@...nc9.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@...nc9.com>
---
 drivers/net/dsa/mt7530.c | 12 ++++++++++--
 drivers/net/dsa/mt7530.h | 23 ++++++++++++-----------
 2 files changed, 22 insertions(+), 13 deletions(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 2fb4b0bc6335..8f5a8803cb33 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2225,7 +2225,11 @@ mt7530_setup(struct dsa_switch *ds)
 
 	/* Trap BPDUs to the CPU port */
 	mt7530_rmw(priv, MT753X_BPC, MT753X_BPDU_PORT_FW_MASK,
-		   MT753X_BPDU_CPU_ONLY);
+		   MT753X_PORT_FW_CPU_ONLY);
+
+	/* Trap LLDP frames with :0E MAC DA to the CPU port */
+	mt7530_rmw(priv, MT753X_RGAC2, MT753X_R0E_PORT_FW_MASK,
+		   MT753X_R0E_PORT_FW(MT753X_PORT_FW_CPU_ONLY));
 
 	/* Enable and reset MIB counters */
 	mt7530_mib_reset(ds);
@@ -2325,7 +2329,11 @@ mt7531_setup_common(struct dsa_switch *ds)
 
 	/* Trap BPDUs to the CPU port(s) */
 	mt7530_rmw(priv, MT753X_BPC, MT753X_BPDU_PORT_FW_MASK,
-		   MT753X_BPDU_CPU_ONLY);
+		   MT753X_PORT_FW_CPU_ONLY);
+
+	/* Trap LLDP frames with :0E MAC DA to the CPU port(s) */
+	mt7530_rmw(priv, MT753X_RGAC2, MT753X_R0E_PORT_FW_MASK,
+		   MT753X_R0E_PORT_FW(MT753X_PORT_FW_CPU_ONLY));
 
 	/* Enable and reset MIB counters */
 	mt7530_mib_reset(ds);
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index 52e5d71a04d3..2664057b3cd2 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -25,10 +25,6 @@ enum mt753x_id {
 
 #define TRGMII_BASE(x)			(0x10000 + (x))
 
-/* Registers to ethsys access */
-#define ETHSYS_CLKCFG0			0x2c
-#define  ETHSYS_TRGMII_CLK_SEL362_5	BIT(11)
-
 #define SYSC_REG_RSTCTRL		0x34
 #define  RESET_MCM			BIT(2)
 
@@ -63,16 +59,21 @@ enum mt753x_id {
 #define MT753X_MIRROR_MASK(id)		((((id) == ID_MT7531) || ((id) == ID_MT7988)) ?	\
 					 MT7531_MIRROR_MASK : MT7530_MIRROR_MASK)
 
-/* Registers for BPDU and PAE frame control*/
+/* Register for BPDU and PAE frame control */
 #define MT753X_BPC			0x24
 #define  MT753X_BPDU_PORT_FW_MASK	GENMASK(2, 0)
 
-enum mt753x_bpdu_port_fw {
-	MT753X_BPDU_FOLLOW_MFC,
-	MT753X_BPDU_CPU_EXCLUDE = 4,
-	MT753X_BPDU_CPU_INCLUDE = 5,
-	MT753X_BPDU_CPU_ONLY = 6,
-	MT753X_BPDU_DROP = 7,
+/* Register for :03 and :0E MAC DA frame control */
+#define MT753X_RGAC2			0x2c
+#define  MT753X_R0E_PORT_FW(x)		(((x) & 0x7) << 16)
+#define  MT753X_R0E_PORT_FW_MASK	MT753X_R0E_PORT_FW(~0)
+
+enum mt753x_port_fw {
+	MT753X_PORT_FW_FOLLOW_MFC,
+	MT753X_PORT_FW_CPU_EXCLUDE = 4,
+	MT753X_PORT_FW_CPU_INCLUDE = 5,
+	MT753X_PORT_FW_CPU_ONLY = 6,
+	MT753X_PORT_FW_DROP = 7,
 };
 
 /* Registers for address table access */
-- 
2.39.2