| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAA8EJpq=HZqiBZ6bpUNH47VmASuH+Mi5OD5BHmg0TPwtsKHf8w@mail.gmail.com>
Date: Mon, 22 May 2023 15:58:56 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: neil.armstrong@...aro.org
Cc: Marijn Suijten <marijn.suijten@...ainline.org>,
Sam Ravnborg <sam@...nborg.org>,
David Airlie <airlied@...il.com>,
Daniel Vetter <daniel@...ll.ch>,
Caleb Connolly <caleb@...nolly.tech>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
~postmarketos/upstreaming@...ts.sr.ht,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...ainline.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Martin Botka <martin.botka@...ainline.org>,
Jami Kettunen <jami.kettunen@...ainline.org>,
dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-msm@...r.kernel.org,
Abhinav Kumar <quic_abhinavk@...cinc.com>,
Kuogee Hsieh <quic_khsieh@...cinc.com>,
Jessica Zhang <quic_jesszhan@...cinc.com>
Subject: Re: [PATCH RFC 03/10] drm/panel: Add LGD panel driver for Sony Xperia XZ3
On Mon, 22 May 2023 at 12:04, Neil Armstrong <neil.armstrong@...aro.org> wrote:
>
> On 22/05/2023 03:16, Dmitry Baryshkov wrote:
> > On 22/05/2023 00:23, Marijn Suijten wrote:
> >> Sony provides an unlabeled LGD + Atmel maXTouch assembly in its Xperia
> >> XZ3 (tama akatsuki) phone, with custom DCS commands to match.
> >>
> >> This panel features Display Stream Compression 1.1.
> >>
> >> Signed-off-by: Marijn Suijten <marijn.suijten@...ainline.org>
> >> ---
> >> drivers/gpu/drm/panel/Kconfig | 11 +
> >> drivers/gpu/drm/panel/Makefile | 1 +
> >> drivers/gpu/drm/panel/panel-sony-akatsuki-lgd.c | 362 ++++++++++++++++++++++++
> >> 3 files changed, 374 insertions(+)
> >>
> >> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> >> index 67ef898d133f2..18bd116e78a71 100644
> >> --- a/drivers/gpu/drm/panel/Kconfig
> >> +++ b/drivers/gpu/drm/panel/Kconfig
> >> @@ -706,6 +706,17 @@ config DRM_PANEL_SONY_ACX565AKM
> >> Say Y here if you want to enable support for the Sony ACX565AKM
> >> 800x600 3.5" panel (found on the Nokia N900).
> >> +config DRM_PANEL_SONY_AKATSUKI_LGD
> >> + tristate "Sony Xperia XZ3 LGD panel"
> >> + depends on GPIOLIB && OF
> >> + depends on DRM_MIPI_DSI
> >> + depends on BACKLIGHT_CLASS_DEVICE
> >> + help
> >> + Say Y here if you want to enable support for the Sony Xperia XZ3
> >> + 1440x2880@60 6.0" OLED DSI cmd mode panel produced by LG Display.
> >> +
> >> + This panel uses Display Stream Compression 1.1.
> >> +
> >> config DRM_PANEL_SONY_TD4353_JDI
> >> tristate "Sony TD4353 JDI panel"
> >> depends on GPIOLIB && OF
> >> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> >> index ff169781e82d7..85133f73558f3 100644
> >> --- a/drivers/gpu/drm/panel/Makefile
> >> +++ b/drivers/gpu/drm/panel/Makefile
> >> @@ -71,6 +71,7 @@ obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) += panel-sitronix-st7701.o
> >> obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7703) += panel-sitronix-st7703.o
> >> obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
> >> obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
> >> +obj-$(CONFIG_DRM_PANEL_SONY_AKATSUKI_LGD) += panel-sony-akatsuki-lgd.o
> >> obj-$(CONFIG_DRM_PANEL_SONY_TD4353_JDI) += panel-sony-td4353-jdi.o
> >> obj-$(CONFIG_DRM_PANEL_SONY_TULIP_TRULY_NT35521) += panel-sony-tulip-truly-nt35521.o
> >> obj-$(CONFIG_DRM_PANEL_TDO_TL070WSH30) += panel-tdo-tl070wsh30.o
> >> diff --git a/drivers/gpu/drm/panel/panel-sony-akatsuki-lgd.c b/drivers/gpu/drm/panel/panel-sony-akatsuki-lgd.c
> >> new file mode 100644
> >> index 0000000000000..f55788f963dab
> >> --- /dev/null
> >> +++ b/drivers/gpu/drm/panel/panel-sony-akatsuki-lgd.c
> >> @@ -0,0 +1,362 @@
> >> +// SPDX-License-Identifier: GPL-2.0-only
> >> +/*
> >> + * Copyright (c) 2023 Marijn Suijten <marijn.suijten@...ainline.org>
> >> + *
> >> + * Based on Sony Downstream's "Atmel LGD ID5" Akatsuki panel dtsi.
> >> + */
> >> +
> >> +#include <linux/backlight.h>
> >> +#include <linux/delay.h>
> >> +#include <linux/gpio/consumer.h>
> >> +#include <linux/module.h>
> >> +#include <linux/of.h>
> >> +#include <linux/of_device.h>
> >> +#include <linux/regulator/consumer.h>
> >> +
> >> +#include <video/mipi_display.h>
> >> +
> >> +#include <drm/drm_mipi_dsi.h>
> >> +#include <drm/drm_modes.h>
> >> +#include <drm/drm_panel.h>
> >> +#include <drm/drm_probe_helper.h>
> >> +#include <drm/display/drm_dsc.h>
> >> +#include <drm/display/drm_dsc_helper.h>
> >> +
> >> +struct sony_akatsuki_lgd {
> >> + struct drm_panel panel;
> >> + struct mipi_dsi_device *dsi;
> >> + struct regulator *vddio;
> >> + struct gpio_desc *reset_gpio;
> >> + bool prepared;
> >> +};
> >> +
> >> +static inline struct sony_akatsuki_lgd *to_sony_akatsuki_lgd(struct drm_panel *panel)
> >> +{
> >> + return container_of(panel, struct sony_akatsuki_lgd, panel);
> >> +}
> >> +
> >> +static int sony_akatsuki_lgd_on(struct sony_akatsuki_lgd *ctx)
> >> +{
> >> + struct mipi_dsi_device *dsi = ctx->dsi;
> >> + struct device *dev = &dsi->dev;
> >> + int ret;
> >> +
> >> + dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> >> +
> >> + mipi_dsi_dcs_write_seq(dsi, 0x7f, 0x5a, 0x5a);
> >> + mipi_dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a);
> >> + mipi_dsi_dcs_write_seq(dsi, 0xf1, 0x5a, 0x5a);
> >> + mipi_dsi_dcs_write_seq(dsi, 0xf2, 0x5a, 0x5a);
> >> + mipi_dsi_dcs_write_seq(dsi, 0x02, 0x01);
> >> + mipi_dsi_dcs_write_seq(dsi, 0x59, 0x01);
> >> + /* Enable backlight control */
> >> + mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, BIT(5));
> >> + mipi_dsi_dcs_write_seq(dsi, 0x57, 0x20, 0x80, 0xde, 0x60, 0x00);
> >> +
> >> + ret = mipi_dsi_dcs_set_column_address(dsi, 0, 1440 - 1);
> >> + if (ret < 0) {
> >> + dev_err(dev, "Failed to set column address: %d\n", ret);
> >> + return ret;
> >> + }
> >> +
> >> + ret = mipi_dsi_dcs_set_page_address(dsi, 0, 2880 - 1);
> >> + if (ret < 0) {
> >> + dev_err(dev, "Failed to set page address: %d\n", ret);
> >> + return ret;
> >> + }
> >> +
> >> + mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_POWER_SAVE, 0x00);
> >> +
> >> + ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
> >> + if (ret < 0) {
> >> + dev_err(dev, "Failed to set tear on: %d\n", ret);
> >> + return ret;
> >> + }
> >> +
> >> + mipi_dsi_dcs_write_seq(dsi, 0x7f, 0x5a, 0x5a);
> >> + mipi_dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a);
> >> + mipi_dsi_dcs_write_seq(dsi, 0xf1, 0x5a, 0x5a);
> >> + mipi_dsi_dcs_write_seq(dsi, 0xf2, 0x5a, 0x5a);
> >> + mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x03);
> >> + mipi_dsi_dcs_write_seq(dsi, 0xf6, 0x04);
> >> + mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x05);
> >> + mipi_dsi_dcs_write_seq(dsi, 0xf6, 0x01, 0x7f, 0x00);
> >> +
> >> + ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
> >> + if (ret < 0) {
> >> + dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
> >> + return ret;
> >> + }
> >> + msleep(120);
> >> +
> >> + mipi_dsi_dcs_write_seq(dsi, 0xe3, 0xac, 0x19, 0x34, 0x14, 0x7d);
> >> +
> >> + ret = mipi_dsi_dcs_set_display_on(dsi);
> >> + if (ret < 0) {
> >> + dev_err(dev, "Failed to turn display on: %d\n", ret);
> >> + return ret;
> >> + }
> >
> > My usual question: should the mipi_dsi_dcs_exit_sleep_mode() / mipi_dsi_dcs_set_display_on() be moved from prepare() to enable() part?
>
>
> No, prepare is called before the video stream is started and when display is still in LPM mode and the mode hasn't been set.
>
Yes, that's my point. Shouldn't we enable the panel _after_ starting the stream?
--
With best wishes
Dmitry
Powered by blists - more mailing lists