[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZGzc50GqA9mDuafm@shell.armlinux.org.uk>
Date: Tue, 23 May 2023 16:33:59 +0100
From: "Russell King (Oracle)" <linux@...linux.org.uk>
To: David Epping <david.epping@...singlinkelectronics.com>
Cc: Vladimir Oltean <olteanv@...il.com>, Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
"David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, UNGLinuxDriver@...rochip.com
Subject: Re: [PATCH net v3 4/4] net: phy: mscc: enable VSC8501/2 RGMII RX
clock
On Tue, May 23, 2023 at 05:31:08PM +0200, David Epping wrote:
> By default the VSC8501 and VSC8502 RGMII/GMII/MII RX_CLK output is
> disabled. To allow packet forwarding towards the MAC it needs to be
> enabled.
>
> For other PHYs supported by this driver the clock output is enabled
> by default.
>
> Signed-off-by: David Epping <david.epping@...singlinkelectronics.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
Thanks!
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
Powered by blists - more mailing lists