[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230524175107.hwzygo7p4l4rvawj@skbuf>
Date: Wed, 24 May 2023 20:51:07 +0300
From: Vladimir Oltean <olteanv@...il.com>
To: arinc9.unal@...il.com
Cc: Sean Wang <sean.wang@...iatek.com>,
Landen Chao <Landen.Chao@...iatek.com>,
DENG Qingfang <dqfext@...il.com>,
Daniel Golle <daniel@...rotopia.org>,
Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>,
Russell King <linux@...linux.org.uk>,
Arınç ÜNAL <arinc.unal@...nc9.com>,
Richard van Schagen <richard@...terhints.com>,
Richard van Schagen <vschagen@...com>,
Frank Wunderlich <frank-w@...lic-files.de>,
Bartel Eerdekens <bartel.eerdekens@...stell8.be>,
erkin.bozoglu@...ont.com, mithat.guner@...ont.com,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org
Subject: Re: [PATCH net-next 08/30] net: dsa: mt7530: change p{5,6}_interface
to p{5,6}_configured
On Mon, May 22, 2023 at 03:15:10PM +0300, arinc9.unal@...il.com wrote:
> diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
> index 710c6622d648..d837aa20968c 100644
> --- a/drivers/net/dsa/mt7530.c
> +++ b/drivers/net/dsa/mt7530.c
> @@ -2728,25 +2722,20 @@ mt753x_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
> goto unsupported;
> break;
> case 5: /* Port 5, can be used as a CPU port. */
> - if (priv->p5_interface == state->interface)
> + if (priv->p5_configured)
> break;
>
> if (mt753x_mac_config(ds, port, mode, state) < 0)
> goto unsupported;
> -
> - if (priv->p5_intf_sel != P5_DISABLED)
> - priv->p5_interface = state->interface;
If you don't replace this bit with anything, who will set priv->p5_configured
for mt7530?
> break;
> case 6: /* Port 6, can be used as a CPU port. */
> - if (priv->p6_interface == state->interface)
> + if (priv->p6_configured)
> break;
>
> mt753x_pad_setup(ds, state);
>
> if (mt753x_mac_config(ds, port, mode, state) < 0)
> goto unsupported;
> -
> - priv->p6_interface = state->interface;
Similar question for port 6.
Powered by blists - more mailing lists