| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230524-blizzard-hunting-4da815e634e2@spud>
Date: Wed, 24 May 2023 20:19:08 +0100
From: Conor Dooley <conor@...nel.org>
To: Claudiu Beznea <claudiu.beznea@...rochip.com>
Cc: robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
conor+dt@...nel.org, nicolas.ferre@...rochip.com,
alexandre.belloni@...tlin.com, sre@...nel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-pm@...r.kernel.org
Subject: Re: [PATCH v2 3/4] dt-bindings: power: reset: atmel,sama5d2-shdwc:
convert to yaml
On Wed, May 24, 2023 at 03:35:27PM +0300, Claudiu Beznea wrote:
> Convert Atmel SAMA5D2 shutdown controller to YAML. SAMA7G5 SHDWC DT node
> (available in arch/arm/boot/dts/sama7g5.dtsi) has syscon along with its
> compatible. There is no usage of this syscon in the current code but it
> may be necessary in future as some registers of SHDWC are accessed in
> different drivers (at91-sama5d2_shdwc.c and arch/arm/mach-at91/pm.c).
> Thus update the YAML with it to make DT checkers happy.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea@...rochip.com>
Modulo the license thing that I mentioned on v1,
Reviewed-by: Conor Dooley <conor.dooley@...rochip.com>
Thanks,
Conor.
> ---
> .../devicetree/bindings/arm/atmel-sysregs.txt | 63 ----------
> .../power/reset/atmel,sama5d2-shdwc.yaml | 115 ++++++++++++++++++
> 2 files changed, 115 insertions(+), 63 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml
>
> diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> index e6b2fb291b45..67a66bf74895 100644
> --- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> +++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> @@ -52,69 +52,6 @@ Example:
> reg = <0xe3804000 0x1000>;
> };
>
> -SHDWC SAMA5D2-Compatible Shutdown Controller
> -
> -1) shdwc node
> -
> -required properties:
> -- compatible: should be "atmel,sama5d2-shdwc", "microchip,sam9x60-shdwc" or
> - "microchip,sama7g5-shdwc"
> -- reg: should contain registers location and length
> -- clocks: phandle to input clock.
> -- #address-cells: should be one. The cell is the wake-up input index.
> -- #size-cells: should be zero.
> -
> -optional properties:
> -
> -- debounce-delay-us: minimum wake-up inputs debouncer period in
> - microseconds. It's usually a board-related property.
> -- atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
> -
> -optional microchip,sam9x60-shdwc or microchip,sama7g5-shdwc properties:
> -- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
> -
> -The node contains child nodes for each wake-up input that the platform uses.
> -
> -2) input nodes
> -
> -Wake-up input nodes are usually described in the "board" part of the Device
> -Tree. Note also that input 0 is linked to the wake-up pin and is frequently
> -used.
> -
> -Required properties:
> -- reg: should contain the wake-up input index [0 - 15].
> -
> -Optional properties:
> -- atmel,wakeup-active-high: boolean, the corresponding wake-up input described
> - by the child, forces the wake-up of the core power supply on a high level.
> - The default is to be active low.
> -
> -Example:
> -
> -On the SoC side:
> - shdwc@...48010 {
> - compatible = "atmel,sama5d2-shdwc";
> - reg = <0xf8048010 0x10>;
> - clocks = <&clk32k>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - atmel,wakeup-rtc-timer;
> - };
> -
> -On the board side:
> - shdwc@...48010 {
> - debounce-delay-us = <976>;
> -
> - input@0 {
> - reg = <0>;
> - };
> -
> - input@1 {
> - reg = <1>;
> - atmel,wakeup-active-high;
> - };
> - };
> -
> Special Function Registers (SFR)
>
> Special Function Registers (SFR) manage specific aspects of the integrated
> diff --git a/Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml b/Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml
> new file mode 100644
> index 000000000000..31a16a354a3a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml
> @@ -0,0 +1,115 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/power/reset/atmel,sama5d2-shdwc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Atmel SAMA5D2 SHDWC Shutdown Controller
> +
> +maintainers:
> + - Claudiu Beznea <claudiu.beznea@...rochip.com>
> +
> +description:
> + Atmel SHDWC shutdown controller controls the power supplies VDDIO and VDDCORE
> + and the wake-up detection on debounced input lines.
> +
> +properties:
> + compatible:
> + oneOf:
> + - items:
> + - const: microchip,sama7g5-shdwc
> + - const: syscon
> + - items:
> + enum:
> + - atmel,sama5d2-shdwc
> + - microchip,sam9x60-shdwc
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 0
> +
> + debounce-delay-us:
> + description:
> + Minimum wake-up inputs debouncer period in microseconds. It is usually a
> + board-related property.
> +
> + atmel,wakeup-rtc-timer:
> + description: enable real-time clock wake-up
> + type: boolean
> +
> +patternProperties:
> + "^input@[0-15]$":
> + description:
> + Wake-up input nodes. These are usually described in the "board" part of
> + the Device Tree. Note also that input 0 is linked to the wake-up pin and
> + is frequently used.
> + type: object
> + properties:
> + reg:
> + description: contains the wake-up input index
> + minimum: 0
> + maximum: 15
> +
> + atmel,wakeup-active-high:
> + description:
> + The corresponding wake-up input described by the child forces the
> + wake-up of the core power supply on a high level. The default is to
> + be active low.
> + type: boolean
> +
> + required:
> + - reg
> +
> + additionalProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> +
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - microchip,sam9x60-shdwc
> + - microchip,sama7g5-shdwc
> + then:
> + properties:
> + atmel,wakeup-rtt-timer:
> + description: enable real-time timer wake-up
> + type: boolean
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + shdwc: poweroff@...48010 {
> + compatible = "atmel,sama5d2-shdwc";
> + reg = <0xf8048010 0x10>;
> + clocks = <&clk32k>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + atmel,wakeup-rtc-timer;
> + debounce-delay-us = <976>;
> +
> + input@0 {
> + reg = <0>;
> + };
> +
> + input@1 {
> + reg = <1>;
> + atmel,wakeup-active-high;
> + };
> + };
> +
> +...
> --
> 2.34.1
>
Download attachment "signature.asc" of type "application/pgp-signature" (229 bytes)
Powered by blists - more mailing lists