linux-kernel - Re: [tiL6.1 PATCH v2] arm64: dts: ti: k3-j721s2: Add support for CAN instances 3 and 5 in main domain

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <774c53d6-9727-25cb-c09e-8c23721e7774@ti.com>
Date:   Wed, 24 May 2023 14:01:09 +0530
From:   Bhavya Kapoor <b-kapoor@...com>
To:     <linux-arm-kernel@...ts.infradead.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
CC:     <nm@...com>, <vigneshr@...com>, <kristo@...nel.org>,
        <robh+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
        <u-kumar1@...com>, <jm@...com>
Subject: Re: [tiL6.1 PATCH v2] arm64: dts: ti: k3-j721s2: Add support for CAN
 instances 3 and 5 in main domain

Hi , request you to  ignore this patch .

On 23/05/23 14:20, Bhavya Kapoor wrote:
> CAN instances 3 and 5 in the main domain are brought on the common
> processor board through header J27 and J28. The CAN High and Low lines
> from the SoC are routed through a mux on the SoM. The select lines need
> to be set for the CAN signals to get connected to the transceivers on
> the common processor board. Threfore, add respective mux, transceiver
> dt nodes to add support for these CAN instances.
>
> Signed-off-by: Bhavya Kapoor <b-kapoor@...com>
> ---
>
> Changelog v1->v2: Modified indentation according to comments
>
> Link to v1 : https://lore.kernel.org/all/20230412084935.699791-1-b-kapoor@ti.com/
>
>  .../dts/ti/k3-j721s2-common-proc-board.dts    | 46 +++++++++++++++++++
>  arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi  | 12 +++++
>  2 files changed, 58 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
> index a7aa6cf08acd..f07663bbea16 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
> @@ -27,6 +27,8 @@ aliases {
>  		can0 = &main_mcan16;
>  		can1 = &mcu_mcan0;
>  		can2 = &mcu_mcan1;
> +		can3 = &main_mcan3;
> +		can4 = &main_mcan5;
>  	};
>  
>  	evm_12v0: fixedregulator-evm12v0 {
> @@ -107,6 +109,22 @@ transceiver2: can-phy2 {
>  		standby-gpios = <&wkup_gpio0 2 GPIO_ACTIVE_HIGH>;
>  	};
>  
> +	transceiver3: can-phy3 {
> +		compatible = "ti,tcan1043";
> +		#phy-cells = <0>;
> +		max-bitrate = <5000000>;
> +		standby-gpios = <&exp2 7 GPIO_ACTIVE_LOW>;
> +		enable-gpios = <&exp2 6 GPIO_ACTIVE_HIGH>;
> +		mux-states = <&mux0 1>;
> +	};
> +
> +	transceiver4: can-phy4 {
> +		compatible = "ti,tcan1042";
> +		#phy-cells = <0>;
> +		max-bitrate = <5000000>;
> +		standby-gpios = <&exp_som 7 GPIO_ACTIVE_HIGH>;
> +		mux-states = <&mux1 1>;
> +	};
>  };
>  
>  &main_pmx0 {
> @@ -144,6 +162,20 @@ vdd_sd_dv_pins_default: vdd-sd-dv-pins-default {
>  			J721S2_IOPAD(0x020, PIN_INPUT, 7) /* (AA23) MCAN15_RX.GPIO0_8 */
>  		>;
>  	};
> +
> +	main_mcan3_pins_default: main-mcan3-pins-default {
> +		pinctrl-single,pins = <
> +			J721S2_IOPAD(0x080, PIN_INPUT, 0) /* (U26) MCASP0_AXR4.MCAN3_RX */
> +			J721S2_IOPAD(0x07c, PIN_OUTPUT, 0) /* (T27) MCASP0_AXR3.MCAN3_TX */
> +		>;
> +	};
> +
> +	main_mcan5_pins_default: main-mcan5-pins-default {
> +		pinctrl-single,pins = <
> +			J721S2_IOPAD(0x03c, PIN_INPUT, 0) /* (U27) MCASP0_AFSX.MCAN5_RX */
> +			J721S2_IOPAD(0x038, PIN_OUTPUT, 0) /* (AB28) MCASP0_ACLKX.MCAN5_TX */
> +		>;
> +	};
>  };
>  
>  &wkup_pmx0 {
> @@ -309,3 +341,17 @@ &mcu_mcan1 {
>  	pinctrl-0 = <&mcu_mcan1_pins_default>;
>  	phys = <&transceiver2>;
>  };
> +
> +&main_mcan3 {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&main_mcan3_pins_default>;
> +	phys = <&transceiver3>;
> +};
> +
> +&main_mcan5 {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&main_mcan5_pins_default>;
> +	phys = <&transceiver4>;
> +};
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
> index 6930efff8a5a..e74bc5141903 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
> @@ -31,6 +31,18 @@ secure_ddr: optee@...00000 {
>  		};
>  	};
>  
> +	mux0: mux-controller0 {
> +		compatible = "gpio-mux";
> +		#mux-state-cells = <1>;
> +		mux-gpios = <&exp_som 1 GPIO_ACTIVE_HIGH>;
> +	};
> +
> +	mux1: mux-controller1 {
> +		compatible = "gpio-mux";
> +		#mux-state-cells = <1>;
> +		mux-gpios = <&exp_som 2 GPIO_ACTIVE_HIGH>;
> +	};
> +
>  	transceiver0: can-phy0 {
>  		/* standby pin has been grounded by default */
>  		compatible = "ti,tcan1042";