linux-kernel - Re: DP83867 ethernet PHY regression

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <ZG4ISE3WXlTM3H54@debian.me>
Date:   Wed, 24 May 2023 19:51:20 +0700
From:   Bagas Sanjaya <bagasdotme@...il.com>
To:     Francesco Dolcini <francesco@...cini.it>,
        Andrew Lunn <andrew@...n.ch>,
        Praneeth Bajjuri <praneeth@...com>,
        Geet Modi <geet.modi@...com>,
        "David S. Miller" <davem@...emloft.net>
Cc:     Heiner Kallweit <hkallweit1@...il.com>,
        Russell King <linux@...linux.org.uk>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        Grygorii Strashko <grygorii.strashko@...com>,
        Dan Murphy <dmurphy@...com>
Subject: Re: DP83867 ethernet PHY regression

On Mon, May 22, 2023 at 04:58:46PM +0200, Francesco Dolcini wrote:
> Hello all,
> commit da9ef50f545f ("net: phy: dp83867: perform soft reset and retain
> established link") introduces a regression on my TI AM62 based board.
> 
> I have a working DTS with Linux TI 5.10 downstream kernel branch, while
> testing the DTS with v6.4-rc in preparation of sending it to the mailing
> list I noticed that ethernet is working only on a cold poweron.
> 
> With da9ef50f545f reverted it always works.
> 
> Here the DTS snippet for reference:
> 
> &cpsw_port1 {
> 	phy-handle = <&cpsw3g_phy0>;
> 	phy-mode = "rgmii-rxid";
> };
> 
> &cpsw3g_mdio {
> 	assigned-clocks = <&k3_clks 157 20>;
> 	assigned-clock-parents = <&k3_clks 157 22>;
> 	assigned-clock-rates = <25000000>;
> 
> 	cpsw3g_phy0: ethernet-phy@0 {
> 		compatible = "ethernet-phy-id2000.a231";
> 		reg = <0>;
> 		interrupt-parent = <&main_gpio0>;
> 		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
> 		reset-gpios = <&main_gpio0 17 GPIO_ACTIVE_LOW>;
> 		reset-assert-us = <10>;
> 		reset-deassert-us = <1000>;
> 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
> 	};
> };
> 

Thanks for the regression report. I'm adding it to regzbot:

#regzbot ^introduced: da9ef50f545f86
#regzbot title: TI AM62 DTS regression due to dp83867 soft reset

-- 
An old man doll... just what I always wanted! - Clara

Download attachment "signature.asc" of type "application/pgp-signature" (229 bytes)