linux-kernel - [PATCH net-next v3 2/6] net: phy: microchip_t1s: replace read-modify-write code with phy_modify

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20230524144539.62618-3-Parthiban.Veerasooran@microchip.com>
Date:   Wed, 24 May 2023 20:15:35 +0530
From:   Parthiban Veerasooran <Parthiban.Veerasooran@...rochip.com>
To:     <andrew@...n.ch>, <hkallweit1@...il.com>, <linux@...linux.org.uk>,
        <davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
        <pabeni@...hat.com>, <netdev@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>,
        <ramon.nordin.rodriguez@...roamp.se>
CC:     <horatiu.vultur@...rochip.com>, <Woojung.Huh@...rochip.com>,
        <Nicolas.Ferre@...rochip.com>, <Thorsten.Kummermehr@...rochip.com>,
        "Parthiban Veerasooran" <Parthiban.Veerasooran@...rochip.com>
Subject: [PATCH net-next v3 2/6] net: phy: microchip_t1s: replace read-modify-write code with phy_modify_mmd

Replace read-modify-write code in the lan867x_config_init function to
avoid handling data type mismatch and to simplify the code.

Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@...rochip.com>
---
 drivers/net/phy/microchip_t1s.c | 23 +++++++++++------------
 1 file changed, 11 insertions(+), 12 deletions(-)

diff --git a/drivers/net/phy/microchip_t1s.c b/drivers/net/phy/microchip_t1s.c
index a42a6bb6e3bd..b5b5a95fa6e7 100644
--- a/drivers/net/phy/microchip_t1s.c
+++ b/drivers/net/phy/microchip_t1s.c
@@ -31,19 +31,19 @@
  * W   0x1F 0x0099 0x7F80 ------
  */
 
-static const int lan867x_fixup_registers[12] = {
+static const u32 lan867x_fixup_registers[12] = {
 	0x00D0, 0x00D1, 0x0084, 0x0085,
 	0x008A, 0x0087, 0x0088, 0x008B,
 	0x0080, 0x00F1, 0x0096, 0x0099,
 };
 
-static const int lan867x_fixup_values[12] = {
+static const u16 lan867x_fixup_values[12] = {
 	0x0002, 0x0000, 0x3380, 0x0006,
 	0xC000, 0x801C, 0x033F, 0x0404,
 	0x0600, 0x2400, 0x2000, 0x7F80,
 };
 
-static const int lan867x_fixup_masks[12] = {
+static const u16 lan867x_fixup_masks[12] = {
 	0x0E03, 0x0300, 0xFFC0, 0x000F,
 	0xF800, 0x801C, 0x1FFF, 0xFFFF,
 	0x0600, 0x7F00, 0x2000, 0xFFFF,
@@ -63,23 +63,22 @@ static int lan867x_config_init(struct phy_device *phydev)
 	 * used, which might then write the same value back as read + modified.
 	 */
 
-	int reg_value;
 	int err;
-	int reg;
 
 	/* Read-Modified Write Pseudocode (from AN1699)
 	 * current_val = read_register(mmd, addr) // Read current register value
 	 * new_val = current_val AND (NOT mask) // Clear bit fields to be written
 	 * new_val = new_val OR value // Set bits
-	 * write_register(mmd, addr, new_val) // Write back updated register value
+	 * write_register(mmd, addr, new_val) // Write back updated register value.
+	 * Although AN1699 says Read, Modify, Write, the write is not required if
+	 * the register already has the required value.
 	 */
 	for (int i = 0; i < ARRAY_SIZE(lan867x_fixup_registers); i++) {
-		reg = lan867x_fixup_registers[i];
-		reg_value = phy_read_mmd(phydev, MDIO_MMD_VEND2, reg);
-		reg_value &= ~lan867x_fixup_masks[i];
-		reg_value |= lan867x_fixup_values[i];
-		err = phy_write_mmd(phydev, MDIO_MMD_VEND2, reg, reg_value);
-		if (err != 0)
+		err = phy_modify_mmd(phydev, MDIO_MMD_VEND2,
+				     lan867x_fixup_registers[i],
+				     lan867x_fixup_masks[i],
+				     lan867x_fixup_values[i]);
+		if (err)
 			return err;
 	}
 
-- 
2.34.1