[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <0dab3bb3-c264-494f-1132-94e1f03ccee3@arm.com>
Date: Thu, 25 May 2023 22:23:49 +0100
From: Suzuki K Poulose <suzuki.poulose@....com>
To: Anshuman Khandual <anshuman.khandual@....com>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
coresight@...ts.linaro.org
Cc: Ganapatrao Kulkarni <gankulkarni@...amperecomputing.com>,
Steve Clevenger <scclevenger@...amperecomputing.com>,
Rob Herring <robh+dt@...nel.org>,
Frank Rowand <frowand.list@...il.com>,
Russell King <linux@...linux.org.uk>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
"Rafael J. Wysocki" <rafael@...nel.org>,
Len Brown <lenb@...nel.org>,
Sudeep Holla <sudeep.holla@....com>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Mathieu Poirier <mathieu.poirier@...aro.org>,
Mike Leach <mike.leach@...aro.org>,
Leo Yan <leo.yan@...aro.org>, devicetree@...r.kernel.org,
linux-acpi@...r.kernel.org
Subject: Re: [PATCH V4 4/6] coresight: etm4x: Change etm4_platform_driver
driver for MMIO devices
Hi Anshuman
Please find a minor issue with the clock handling below.
On 23/05/2023 05:45, Anshuman Khandual wrote:
> Add support for handling MMIO based devices via platform driver. We need to
> make sure that :
>
> 1) The APB clock, if present is enabled at probe and via runtime_pm ops
> 2) Use the ETM4x architecture or CoreSight architecture registers to
> identify a device as CoreSight ETM4x, instead of relying a white list of
> "Peripheral IDs"
>
> The driver doesn't get to handle the devices yet, until we wire the ACPI
> changes to move the devices to be handled via platform driver than the
> etm4_amba driver.
>
> Cc: Mathieu Poirier <mathieu.poirier@...aro.org>
> Cc: Suzuki K Poulose <suzuki.poulose@....com>
> Cc: Mike Leach <mike.leach@...aro.org>
> Cc: Leo Yan <leo.yan@...aro.org>
> Cc: coresight@...ts.linaro.org
> Cc: linux-arm-kernel@...ts.infradead.org
> Cc: linux-kernel@...r.kernel.org
> Signed-off-by: Anshuman Khandual <anshuman.khandual@....com>
> ---
> .../coresight/coresight-etm4x-core.c | 57 ++++++++++++++++++-
> drivers/hwtracing/coresight/coresight-etm4x.h | 4 ++
> include/linux/coresight.h | 47 +++++++++++++++
> 3 files changed, 106 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c
> index 57a7181017bd..c9e2219ee6b6 100644
> --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c
> +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c
> @@ -30,6 +30,7 @@
> #include <linux/platform_device.h>
> #include <linux/pm_runtime.h>
> #include <linux/property.h>
> +#include <linux/clk/clk-conf.h>
>
> #include <asm/barrier.h>
> #include <asm/sections.h>
> @@ -1073,11 +1074,21 @@ static bool etm4_init_sysreg_access(struct etmv4_drvdata *drvdata,
> return true;
> }
>
> +static bool is_devtype_cpu_trace(void __iomem *base)
> +{
> + u32 devtype = readl(base + TRCDEVTYPE);
> +
> + return (devtype == CS_DEVTYPE_PE_TRACE);
> +}
> +
> static bool etm4_init_iomem_access(struct etmv4_drvdata *drvdata,
> struct csdev_access *csa)
> {
> u32 devarch = readl_relaxed(drvdata->base + TRCDEVARCH);
>
> + if (!is_coresight_device(drvdata->base) || !is_devtype_cpu_trace(drvdata->base))
> + return false;
> +
> /*
> * All ETMs must implement TRCDEVARCH to indicate that
> * the component is an ETMv4. Even though TRCIDR1 also
> @@ -2135,6 +2146,7 @@ static int etm4_probe_amba(struct amba_device *adev, const struct amba_id *id)
>
> static int etm4_probe_platform_dev(struct platform_device *pdev)
> {
> + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> struct etmv4_drvdata *drvdata;
> int ret;
>
> @@ -2142,7 +2154,18 @@ static int etm4_probe_platform_dev(struct platform_device *pdev)
> if (!drvdata)
> return -ENOMEM;
>
> - drvdata->base = NULL;
> + drvdata->pclk = coresight_get_enable_apb_pclk(&pdev->dev);
> + if (IS_ERR(drvdata->pclk))
> + return -ENODEV;
> +
> + if (res) {
> + drvdata->base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(drvdata->base)) {
> + clk_put(drvdata->pclk);
clk_put() can handle drvdata->pclk == NULL and bail out early. So
calling this without the != NULL check is fine.
> + return PTR_ERR(drvdata->base);
> + }
> + }
> +
> dev_set_drvdata(&pdev->dev, drvdata);
> pm_runtime_get_noresume(&pdev->dev);
> pm_runtime_set_active(&pdev->dev);
> @@ -2188,7 +2211,7 @@ static struct amba_cs_uci_id uci_id_etm4[] = {
> /* ETMv4 UCI data */
> .devarch = ETM_DEVARCH_ETMv4x_ARCH,
> .devarch_mask = ETM_DEVARCH_ID_MASK,
> - .devtype = 0x00000013,
> + .devtype = CS_DEVTYPE_PE_TRACE,
> }
> };
>
> @@ -2247,6 +2270,9 @@ static int __exit etm4_remove_platform_dev(struct platform_device *pdev)
> if (drvdata)
> ret = etm4_remove_dev(drvdata);
> pm_runtime_disable(&pdev->dev);
> +
> + if (drvdata->pclk)
> + clk_put(drvdata->pclk);
> return ret;
> }
>
> @@ -2286,6 +2312,32 @@ static struct amba_driver etm4x_amba_driver = {
> .id_table = etm4_ids,
> };
>
> +#ifdef CONFIG_PM
> +static int etm4_runtime_suspend(struct device *dev)
> +{
> + struct etmv4_drvdata *drvdata = dev_get_drvdata(dev);
> +
> + if (!IS_ERR(drvdata->pclk))
> + clk_disable_unprepare(drvdata->pclk);
However this seems to be inconsistent. Should we not use:
if (drvdata->pclk)
...
> +
> + return 0;
> +}
> +
> +static int etm4_runtime_resume(struct device *dev)
> +{
> + struct etmv4_drvdata *drvdata = dev_get_drvdata(dev);
> +
> + if (!IS_ERR(drvdata->pclk))
same as above ?
> + clk_prepare_enable(drvdata->pclk);
> +
> + return 0;
> +}
> +#endif
> +
> +static const struct dev_pm_ops etm4_dev_pm_ops = {
> + SET_RUNTIME_PM_OPS(etm4_runtime_suspend, etm4_runtime_resume, NULL)
> +};
> +
> static const struct of_device_id etm4_sysreg_match[] = {
> { .compatible = "arm,coresight-etm4x-sysreg" },
> { .compatible = "arm,embedded-trace-extension" },
> @@ -2299,6 +2351,7 @@ static struct platform_driver etm4_platform_driver = {
> .name = "coresight-etm4x",
> .of_match_table = etm4_sysreg_match,
> .suppress_bind_attrs = true,
> + .pm = &etm4_dev_pm_ops,
> },
> };
>
> diff --git a/drivers/hwtracing/coresight/coresight-etm4x.h b/drivers/hwtracing/coresight/coresight-etm4x.h
> index 27c8a9901868..0ff0bd2cd504 100644
> --- a/drivers/hwtracing/coresight/coresight-etm4x.h
> +++ b/drivers/hwtracing/coresight/coresight-etm4x.h
> @@ -701,6 +701,8 @@
> #define ETM_DEVARCH_ETE_ARCH \
> (ETM_DEVARCH_ARCHITECT_ARM | ETM_DEVARCH_ARCHID_ETE | ETM_DEVARCH_PRESENT)
>
> +#define CS_DEVTYPE_PE_TRACE 0x00000013
> +
> #define TRCSTATR_IDLE_BIT 0
> #define TRCSTATR_PMSTABLE_BIT 1
> #define ETM_DEFAULT_ADDR_COMP 0
> @@ -944,6 +946,7 @@ struct etmv4_save_state {
>
> /**
> * struct etm4_drvdata - specifics associated to an ETM component
> + * @pclk APB clock for this component
Might be worth adding the comment here :
* @pclk: APB clock if present, otherwise NULL
Rest looks fine to me
Suzuki
Powered by blists - more mailing lists