| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230525095624.615350-1-u.kleine-koenig@pengutronix.de>
Date: Thu, 25 May 2023 11:56:22 +0200
From: Uwe Kleine-König
<u.kleine-koenig@...gutronix.de>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Cc: Rob Herring <robh@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
linux-kernel@...r.kernel.org, Philipp Marek <philipp@...ek.priv.at>
Subject: [PATCH 1/3] w1: gpio: Don't use platform data for driver data
struct device's .platform_data isn't for drivers to write to. For
driver-specific data there is .driver_data instead.
As there is no in-tree platform that provides w1_gpio_platform_data,
drop the include file and replace it by a local struct w1_gpio_ddata.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@...gutronix.de>
---
drivers/w1/masters/w1-gpio.c | 56 +++++++++++++++++-------------------
include/linux/w1-gpio.h | 22 --------------
2 files changed, 27 insertions(+), 51 deletions(-)
delete mode 100644 include/linux/w1-gpio.h
diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c
index e45acb6d916e..8d65db65178c 100644
--- a/drivers/w1/masters/w1-gpio.c
+++ b/drivers/w1/masters/w1-gpio.c
@@ -9,7 +9,6 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
-#include <linux/w1-gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/of_platform.h>
#include <linux/err.h>
@@ -18,9 +17,16 @@
#include <linux/w1.h>
+struct w1_gpio_ddata {
+ struct gpio_desc *gpiod;
+ struct gpio_desc *pullup_gpiod;
+ void (*enable_external_pullup)(int enable);
+ unsigned int pullup_duration;
+};
+
static u8 w1_gpio_set_pullup(void *data, int delay)
{
- struct w1_gpio_platform_data *pdata = data;
+ struct w1_gpio_ddata *pdata = data;
if (delay) {
pdata->pullup_duration = delay;
@@ -46,14 +52,14 @@ static u8 w1_gpio_set_pullup(void *data, int delay)
static void w1_gpio_write_bit(void *data, u8 bit)
{
- struct w1_gpio_platform_data *pdata = data;
+ struct w1_gpio_ddata *pdata = data;
gpiod_set_value(pdata->gpiod, bit);
}
static u8 w1_gpio_read_bit(void *data)
{
- struct w1_gpio_platform_data *pdata = data;
+ struct w1_gpio_ddata *pdata = data;
return gpiod_get_value(pdata->gpiod) ? 1 : 0;
}
@@ -69,35 +75,25 @@ MODULE_DEVICE_TABLE(of, w1_gpio_dt_ids);
static int w1_gpio_probe(struct platform_device *pdev)
{
struct w1_bus_master *master;
- struct w1_gpio_platform_data *pdata;
+ struct w1_gpio_ddata *pdata;
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
/* Enforce open drain mode by default */
enum gpiod_flags gflags = GPIOD_OUT_LOW_OPEN_DRAIN;
int err;
- if (of_have_populated_dt()) {
- pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
- if (!pdata)
- return -ENOMEM;
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
- /*
- * This parameter means that something else than the gpiolib has
- * already set the line into open drain mode, so we should just
- * driver it high/low like we are in full control of the line and
- * open drain will happen transparently.
- */
- if (of_property_present(np, "linux,open-drain"))
- gflags = GPIOD_OUT_LOW;
-
- pdev->dev.platform_data = pdata;
- }
- pdata = dev_get_platdata(dev);
-
- if (!pdata) {
- dev_err(dev, "No configuration data\n");
- return -ENXIO;
- }
+ /*
+ * This parameter means that something else than the gpiolib has
+ * already set the line into open drain mode, so we should just
+ * driver it high/low like we are in full control of the line and
+ * open drain will happen transparently.
+ */
+ if (of_property_present(np, "linux,open-drain"))
+ gflags = GPIOD_OUT_LOW;
master = devm_kzalloc(dev, sizeof(struct w1_bus_master),
GFP_KERNEL);
@@ -152,7 +148,7 @@ static int w1_gpio_probe(struct platform_device *pdev)
static int w1_gpio_remove(struct platform_device *pdev)
{
struct w1_bus_master *master = platform_get_drvdata(pdev);
- struct w1_gpio_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct w1_gpio_ddata *pdata = master->data;
if (pdata->enable_external_pullup)
pdata->enable_external_pullup(0);
@@ -167,7 +163,8 @@ static int w1_gpio_remove(struct platform_device *pdev)
static int __maybe_unused w1_gpio_suspend(struct device *dev)
{
- struct w1_gpio_platform_data *pdata = dev_get_platdata(dev);
+ struct w1_bus_master *master = dev_get_drvdata(dev);
+ struct w1_gpio_ddata *pdata = master->data;
if (pdata->enable_external_pullup)
pdata->enable_external_pullup(0);
@@ -177,7 +174,8 @@ static int __maybe_unused w1_gpio_suspend(struct device *dev)
static int __maybe_unused w1_gpio_resume(struct device *dev)
{
- struct w1_gpio_platform_data *pdata = dev_get_platdata(dev);
+ struct w1_bus_master *master = dev_get_drvdata(dev);
+ struct w1_gpio_ddata *pdata = master->data;
if (pdata->enable_external_pullup)
pdata->enable_external_pullup(1);
diff --git a/include/linux/w1-gpio.h b/include/linux/w1-gpio.h
deleted file mode 100644
index 3495fd0dc790..000000000000
--- a/include/linux/w1-gpio.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * w1-gpio interface to platform code
- *
- * Copyright (C) 2007 Ville Syrjala <syrjala@....fi>
- */
-#ifndef _LINUX_W1_GPIO_H
-#define _LINUX_W1_GPIO_H
-
-struct gpio_desc;
-
-/**
- * struct w1_gpio_platform_data - Platform-dependent data for w1-gpio
- */
-struct w1_gpio_platform_data {
- struct gpio_desc *gpiod;
- struct gpio_desc *pullup_gpiod;
- void (*enable_external_pullup)(int enable);
- unsigned int pullup_duration;
-};
-
-#endif /* _LINUX_W1_GPIO_H */
base-commit: ac9a78681b921877518763ba0e89202254349d1b
--
2.39.2
Powered by blists - more mailing lists