| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230525101126.370108-3-maxime.chevallier@bootlin.com>
Date: Thu, 25 May 2023 12:11:24 +0200
From: Maxime Chevallier <maxime.chevallier@...tlin.com>
To: Mark Brown <broonie@...nel.org>, davem@...emloft.net
Cc: Maxime Chevallier <maxime.chevallier@...tlin.com>,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
alexis.lothore@...tlin.com, thomas.petazzoni@...tlin.com,
Andrew Lunn <andrew@...n.ch>, Jakub Kicinski <kuba@...nel.org>,
Eric Dumazet <edumazet@...gle.com>,
Paolo Abeni <pabeni@...hat.com>,
Florian Fainelli <f.fainelli@...il.com>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
Vladimir Oltean <vladimir.oltean@....com>,
Ioana Ciornei <ioana.ciornei@....com>,
linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Jose Abreu <joabreu@...opsys.com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Giuseppe Cavallaro <peppe.cavallaro@...com>
Subject: [PATCH net-next v2 2/4] net: ethernet: altera-tse: Convert to mdio-regmap and use PCS Lynx
The newly introduced regmap-based MDIO driver allows for an easy mapping
of an mdiodevice onto the memory-mapped TSE PCS, which is actually a
Lynx PCS.
Convert Altera TSE to use this PCS instead of the pcs-altera-tse, which
is nothing more than a memory-mapped Lynx PCS.
Signed-off-by: Maxime Chevallier <maxime.chevallier@...tlin.com>
---
V1->V2 : No changes
drivers/net/ethernet/altera/altera_tse.h | 1 +
drivers/net/ethernet/altera/altera_tse_main.c | 57 +++++++++++++++++--
include/linux/mdio/mdio-regmap.h | 2 +
3 files changed, 54 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/altera/altera_tse.h b/drivers/net/ethernet/altera/altera_tse.h
index db5eed06e92d..d50cf440d01b 100644
--- a/drivers/net/ethernet/altera/altera_tse.h
+++ b/drivers/net/ethernet/altera/altera_tse.h
@@ -477,6 +477,7 @@ struct altera_tse_private {
struct phylink *phylink;
struct phylink_config phylink_config;
struct phylink_pcs *pcs;
+ struct mdio_device *pcs_mdiodev;
};
/* Function prototypes
diff --git a/drivers/net/ethernet/altera/altera_tse_main.c b/drivers/net/ethernet/altera/altera_tse_main.c
index 190ff1bcd94e..66db6a7d0b22 100644
--- a/drivers/net/ethernet/altera/altera_tse_main.c
+++ b/drivers/net/ethernet/altera/altera_tse_main.c
@@ -27,14 +27,16 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mii.h>
+#include <linux/mdio/mdio-regmap.h>
#include <linux/netdevice.h>
#include <linux/of_device.h>
#include <linux/of_mdio.h>
#include <linux/of_net.h>
#include <linux/of_platform.h>
-#include <linux/pcs-altera-tse.h>
+#include <linux/pcs-lynx.h>
#include <linux/phy.h>
#include <linux/platform_device.h>
+#include <linux/regmap.h>
#include <linux/skbuff.h>
#include <asm/cacheflush.h>
@@ -1134,13 +1136,21 @@ static int altera_tse_probe(struct platform_device *pdev)
const struct of_device_id *of_id = NULL;
struct altera_tse_private *priv;
struct resource *control_port;
+ struct regmap *pcs_regmap;
struct resource *dma_res;
struct resource *pcs_res;
+ struct mii_bus *pcs_bus;
struct net_device *ndev;
void __iomem *descmap;
- int pcs_reg_width = 2;
int ret = -ENODEV;
+ struct regmap_config pcs_regmap_cfg;
+
+ struct mdio_regmap_config mrc = {
+ .parent = &pdev->dev,
+ .valid_addr = 0x0,
+ };
+
ndev = alloc_etherdev(sizeof(struct altera_tse_private));
if (!ndev) {
dev_err(&pdev->dev, "Could not allocate network device\n");
@@ -1258,10 +1268,29 @@ static int altera_tse_probe(struct platform_device *pdev)
ret = request_and_map(pdev, "pcs", &pcs_res,
&priv->pcs_base);
if (ret) {
+ /* If we can't find a dedicated resource for the PCS, fallback
+ * to the internal PCS, that has a different address stride
+ */
priv->pcs_base = priv->mac_dev + tse_csroffs(mdio_phy0);
- pcs_reg_width = 4;
+ pcs_regmap_cfg.reg_bits = 32;
+ /* Values are MDIO-like values, on 16 bits */
+ pcs_regmap_cfg.val_bits = 16;
+ pcs_regmap_cfg.reg_shift = REGMAP_UPSHIFT(2);
+ } else {
+ pcs_regmap_cfg.reg_bits = 16;
+ pcs_regmap_cfg.val_bits = 16;
+ pcs_regmap_cfg.reg_shift = REGMAP_UPSHIFT(1);
}
+ /* Create a regmap for the PCS so that it can be used by the PCS driver */
+ pcs_regmap = devm_regmap_init_mmio(&pdev->dev, priv->pcs_base,
+ &pcs_regmap_cfg);
+ if (IS_ERR(pcs_regmap)) {
+ ret = PTR_ERR(pcs_regmap);
+ goto err_free_netdev;
+ }
+ mrc.regmap = pcs_regmap;
+
/* Rx IRQ */
priv->rx_irq = platform_get_irq_byname(pdev, "rx_irq");
if (priv->rx_irq == -ENXIO) {
@@ -1384,7 +1413,20 @@ static int altera_tse_probe(struct platform_device *pdev)
(unsigned long) control_port->start, priv->rx_irq,
priv->tx_irq);
- priv->pcs = alt_tse_pcs_create(ndev, priv->pcs_base, pcs_reg_width);
+ snprintf(mrc.name, MII_BUS_ID_SIZE, "%s-pcs-mii", ndev->name);
+ pcs_bus = devm_mdio_regmap_register(&pdev->dev, &mrc);
+ if (IS_ERR(pcs_bus)) {
+ ret = PTR_ERR(pcs_bus);
+ goto err_init_phy;
+ }
+
+ priv->pcs_mdiodev = mdio_device_create(pcs_bus, 0);
+
+ priv->pcs = lynx_pcs_create(priv->pcs_mdiodev);
+ if (!priv->pcs) {
+ ret = -ENODEV;
+ goto err_init_phy;
+ }
priv->phylink_config.dev = &ndev->dev;
priv->phylink_config.type = PHYLINK_NETDEV;
@@ -1407,11 +1449,12 @@ static int altera_tse_probe(struct platform_device *pdev)
if (IS_ERR(priv->phylink)) {
dev_err(&pdev->dev, "failed to create phylink\n");
ret = PTR_ERR(priv->phylink);
- goto err_init_phy;
+ goto err_pcs;
}
return 0;
-
+err_pcs:
+ mdio_device_free(priv->pcs_mdiodev);
err_init_phy:
unregister_netdev(ndev);
err_register_netdev:
@@ -1433,6 +1476,8 @@ static int altera_tse_remove(struct platform_device *pdev)
altera_tse_mdio_destroy(ndev);
unregister_netdev(ndev);
phylink_destroy(priv->phylink);
+ mdio_device_free(priv->pcs_mdiodev);
+
free_netdev(ndev);
return 0;
diff --git a/include/linux/mdio/mdio-regmap.h b/include/linux/mdio/mdio-regmap.h
index b8508f152552..679d9069846b 100644
--- a/include/linux/mdio/mdio-regmap.h
+++ b/include/linux/mdio/mdio-regmap.h
@@ -7,6 +7,8 @@
#ifndef MDIO_REGMAP_H
#define MDIO_REGMAP_H
+#include <linux/phy.h>
+
struct device;
struct regmap;
--
2.40.1
Powered by blists - more mailing lists