| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230525104434.GD9691@google.com>
Date: Thu, 25 May 2023 11:44:34 +0100
From: Lee Jones <lee@...nel.org>
To: Jakob Hauser <jahau@...ketmail.com>
Cc: Sebastian Reichel <sre@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Beomho Seo <beomho.seo@...sung.com>,
Chanwoo Choi <cw00.choi@...sung.com>,
Stephan Gerhold <stephan@...hold.net>,
Raymond Hackley <raymondhackley@...tonmail.com>,
Pavel Machek <pavel@....cz>, Axel Lin <axel.lin@...ics.com>,
ChiYuan Huang <cy_huang@...htek.com>,
Linus Walleij <linus.walleij@...aro.org>,
Henrik Grimler <henrik@...mler.se>,
Christophe Jaillet <christophe.jaillet@...adoo.fr>,
linux-pm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, phone-devel@...r.kernel.org,
~postmarketos/upstreaming@...ts.sr.ht
Subject: Re: [PATCH v6 04/10 RESEND] mfd: rt5033: Apply preparatory changes
before adding rt5033-charger driver
On Mon, 15 May 2023, Jakob Hauser wrote:
> Order the register blocks to have the masks in descending manner.
>
> Add new defines for constant voltage shift (RT5033_CHGCTRL2_CV_SHIFT),
> MIVR mask (RT5033_CHGCTRL4_MIVR_MASK), pre-charge current shift
> (RT5033_CHGCTRL4_IPREC_SHIFT), internal timer disable
> (RT5033_INT_TIMER_DISABLE), termination disable (RT5033_TE_DISABLE),
> CFO disable (RT5033_CFO_DISABLE), UUG disable (RT5033_CHARGER_UUG_DISABLE).
>
> The fast charge timer type needs to be written on mask 0x38
> (RT5033_CHGCTRL3_TIMER_MASK). To avoid a bit shift on application, change the
> values of the timer types to fit the mask. Added the timout duration as a
> comment. And the timer between TIMER8 and TIMER12 is most likely TIMER10, see
> e.g. RT5036 [1] page 28 bottom.
>
> Add value options for MIVR (Minimum Input Voltage Regulation).
>
> Move RT5033_TE_ENABLE_MASK to the block "RT5033 CHGCTRL1 register", in order
> to have the masks of the register collected there. To fit the naming scheme,
> rename it to RT5033_CHGCTRL1_TE_EN_MASK.
>
> Move RT5033_CHG_MAX_CURRENT to the block "RT5033 charger fast-charge current".
>
> Add new defines RT5033_CV_MAX_VOLTAGE and RT5033_CHG_MAX_PRE_CURRENT to the
> blocks "RT5033 charger constant charge voltage" and "RT5033 charger pre-charge
> current limits".
>
> In include/linux/mfd/rt5033.h, turn power_supply "psy" into a pointer in order
> to use it in devm_power_supply_register().
>
> [1] https://media.digikey.com/pdf/Data%20Sheets/Richtek%20PDF/RT5036%20%20Preliminary.pdf
>
> Signed-off-by: Jakob Hauser <jahau@...ketmail.com>
> ---
> include/linux/mfd/rt5033-private.h | 53 ++++++++++++++++++++----------
> include/linux/mfd/rt5033.h | 2 +-
> 2 files changed, 36 insertions(+), 19 deletions(-)
>
> diff --git a/include/linux/mfd/rt5033-private.h b/include/linux/mfd/rt5033-private.h
> index b6773ebf4e6b..0221f806d139 100644
> --- a/include/linux/mfd/rt5033-private.h
> +++ b/include/linux/mfd/rt5033-private.h
> @@ -55,22 +55,24 @@ enum rt5033_reg {
> };
>
> /* RT5033 Charger state register */
> +#define RT5033_CHG_STAT_TYPE_MASK 0x60
> +#define RT5033_CHG_STAT_TYPE_PRE 0x20
> +#define RT5033_CHG_STAT_TYPE_FAST 0x60
> #define RT5033_CHG_STAT_MASK 0x30
> #define RT5033_CHG_STAT_DISCHARGING 0x00
> #define RT5033_CHG_STAT_FULL 0x10
> #define RT5033_CHG_STAT_CHARGING 0x20
> #define RT5033_CHG_STAT_NOT_CHARGING 0x30
> -#define RT5033_CHG_STAT_TYPE_MASK 0x60
> -#define RT5033_CHG_STAT_TYPE_PRE 0x20
> -#define RT5033_CHG_STAT_TYPE_FAST 0x60
>
> /* RT5033 CHGCTRL1 register */
> #define RT5033_CHGCTRL1_IAICR_MASK 0xe0
> -#define RT5033_CHGCTRL1_MODE_MASK 0x01
> +#define RT5033_CHGCTRL1_TE_EN_MASK 0x08
> #define RT5033_CHGCTRL1_HZ_MASK 0x02
> +#define RT5033_CHGCTRL1_MODE_MASK 0x01
>
> /* RT5033 CHGCTRL2 register */
> #define RT5033_CHGCTRL2_CV_MASK 0xfc
> +#define RT5033_CHGCTRL2_CV_SHIFT 0x02
>
> /* RT5033 DEVICE_ID register */
> #define RT5033_VENDOR_ID_MASK 0xf0
> @@ -82,14 +84,15 @@ enum rt5033_reg {
> #define RT5033_CHGCTRL3_TIMER_EN_MASK 0x01
>
> /* RT5033 CHGCTRL4 register */
> -#define RT5033_CHGCTRL4_EOC_MASK 0x07
> +#define RT5033_CHGCTRL4_MIVR_MASK 0xe0
> #define RT5033_CHGCTRL4_IPREC_MASK 0x18
> +#define RT5033_CHGCTRL4_IPREC_SHIFT 0x03
> +#define RT5033_CHGCTRL4_EOC_MASK 0x07
>
> /* RT5033 CHGCTRL5 register */
> -#define RT5033_CHGCTRL5_VPREC_MASK 0x0f
> #define RT5033_CHGCTRL5_ICHG_MASK 0xf0
> #define RT5033_CHGCTRL5_ICHG_SHIFT 0x04
> -#define RT5033_CHG_MAX_CURRENT 0x0d
> +#define RT5033_CHGCTRL5_VPREC_MASK 0x0f
>
> /* RT5033 RT CTRL1 register */
> #define RT5033_RT_CTRL1_UUG_MASK 0x02
> @@ -128,20 +131,28 @@ enum rt5033_reg {
> #define RT5033_AICR_1500_MODE 0xc0
> #define RT5033_AICR_2000_MODE 0xe0
>
> -/* RT5033 use internal timer need to set time */
> -#define RT5033_FAST_CHARGE_TIMER4 0x00
> -#define RT5033_FAST_CHARGE_TIMER6 0x01
> -#define RT5033_FAST_CHARGE_TIMER8 0x02
> -#define RT5033_FAST_CHARGE_TIMER9 0x03
> -#define RT5033_FAST_CHARGE_TIMER12 0x04
> -#define RT5033_FAST_CHARGE_TIMER14 0x05
> -#define RT5033_FAST_CHARGE_TIMER16 0x06
> +/* RT5033 charger minimum input voltage regulation */
> +#define RT5033_CHARGER_MIVR_DISABLE 0x00
> +#define RT5033_CHARGER_MIVR_4200MV 0x20
> +#define RT5033_CHARGER_MIVR_4300MV 0x40
> +#define RT5033_CHARGER_MIVR_4400MV 0x60
> +#define RT5033_CHARGER_MIVR_4500MV 0x80
> +#define RT5033_CHARGER_MIVR_4600MV 0xa0
> +#define RT5033_CHARGER_MIVR_4700MV 0xc0
> +#define RT5033_CHARGER_MIVR_4800MV 0xe0
>
> +/* RT5033 use internal timer need to set time */
> +#define RT5033_FAST_CHARGE_TIMER4 0x00 /* 4 hrs */
> +#define RT5033_FAST_CHARGE_TIMER6 0x08 /* 6 hrs */
> +#define RT5033_FAST_CHARGE_TIMER8 0x10 /* 8 hrs */
> +#define RT5033_FAST_CHARGE_TIMER10 0x18 /* 10 hrs */
> +#define RT5033_FAST_CHARGE_TIMER12 0x20 /* 12 hrs */
> +#define RT5033_FAST_CHARGE_TIMER14 0x28 /* 14 hrs */
> +#define RT5033_FAST_CHARGE_TIMER16 0x30 /* 16 hrs */
> +
> +#define RT5033_INT_TIMER_DISABLE 0x00
> #define RT5033_INT_TIMER_ENABLE 0x01
>
> -/* RT5033 charger termination enable mask */
> -#define RT5033_TE_ENABLE_MASK 0x08
> -
> /*
> * RT5033 charger opa mode. RT5033 has two opa modes for OTG: charger mode
> * and boost mode.
> @@ -150,25 +161,30 @@ enum rt5033_reg {
> #define RT5033_BOOST_MODE 0x01
>
> /* RT5033 charger termination enable */
> +#define RT5033_TE_DISABLE 0x00
> #define RT5033_TE_ENABLE 0x08
>
> /* RT5033 charger CFO enable */
> +#define RT5033_CFO_DISABLE 0x00
> #define RT5033_CFO_ENABLE 0x40
>
> /* RT5033 charger constant charge voltage (as in CHGCTRL2 register), uV */
> #define RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MIN 3650000U
> #define RT5033_CHARGER_CONST_VOLTAGE_STEP_NUM 25000U
> #define RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MAX 4400000U
> +#define RT5033_CV_MAX_VOLTAGE 0x1e
>
> /* RT5033 charger pre-charge current limits (as in CHGCTRL4 register), uA */
> #define RT5033_CHARGER_PRE_CURRENT_LIMIT_MIN 350000U
> #define RT5033_CHARGER_PRE_CURRENT_STEP_NUM 100000U
> #define RT5033_CHARGER_PRE_CURRENT_LIMIT_MAX 650000U
> +#define RT5033_CHG_MAX_PRE_CURRENT 0x03
>
> /* RT5033 charger fast-charge current (as in CHGCTRL5 register), uA */
> #define RT5033_CHARGER_FAST_CURRENT_MIN 700000U
> #define RT5033_CHARGER_FAST_CURRENT_STEP_NUM 100000U
> #define RT5033_CHARGER_FAST_CURRENT_MAX 2000000U
> +#define RT5033_CHG_MAX_CURRENT 0x0d
>
> /*
> * RT5033 charger const-charge end of charger current (
> @@ -192,6 +208,7 @@ enum rt5033_reg {
> * RT5033 charger UUG. It enables MOS auto control by H/W charger
> * circuit.
> */
> +#define RT5033_CHARGER_UUG_DISABLE 0x00
> #define RT5033_CHARGER_UUG_ENABLE 0x02
>
> /* RT5033 charger high impedance mode */
> diff --git a/include/linux/mfd/rt5033.h b/include/linux/mfd/rt5033.h
> index 8f306ac15a27..e99e2ab0c1c1 100644
> --- a/include/linux/mfd/rt5033.h
> +++ b/include/linux/mfd/rt5033.h
> @@ -51,7 +51,7 @@ struct rt5033_charger_data {
> struct rt5033_charger {
> struct device *dev;
> struct rt5033_dev *rt5033;
> - struct power_supply psy;
> + struct power_supply *psy;
Is this current unused?
> struct rt5033_charger_data *chg;
> };
>
> --
> 2.39.2
>
--
Lee Jones [李琼斯]
Powered by blists - more mailing lists