linux-kernel - [PATCH v2 4/6] clk: qcom: Add lpass audio clock controller driver for SC8280XP

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230525122930.17141-5-srinivas.kandagatla@linaro.org>
Date:   Thu, 25 May 2023 13:29:28 +0100
From:   Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
To:     andersson@...nel.org, robh+dt@...nel.org,
        krzysztof.kozlowski+dt@...aro.org
Cc:     johan+linaro@...nel.org, agross@...nel.org,
        konrad.dybcio@...aro.org, mturquette@...libre.com,
        sboyd@...nel.org, conor+dt@...nel.org,
        linux-arm-msm@...r.kernel.org, linux-clk@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
Subject: [PATCH v2 4/6] clk: qcom: Add lpass audio clock controller driver for SC8280XP

Add support for the lpass audio clock controller found on SC8280XP based
devices. This would allow lpass peripheral loader drivers to control the
clocks and bring the subsystems out of reset.

Currently this patch only supports resets as the Q6DSP is in control of
LPASS IP which manages most of the clocks via Q6PRM service on GPR rpmsg
channel.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
---
 drivers/clk/qcom/lpasscc-sc8280xp.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/drivers/clk/qcom/lpasscc-sc8280xp.c b/drivers/clk/qcom/lpasscc-sc8280xp.c
index 547f15d41a9d..60cc3c98d03d 100644
--- a/drivers/clk/qcom/lpasscc-sc8280xp.c
+++ b/drivers/clk/qcom/lpasscc-sc8280xp.c
@@ -14,6 +14,26 @@
 #include "common.h"
 #include "reset.h"
 
+static const struct qcom_reset_map lpass_audiocc_sc8280xp_resets[] = {
+	[LPASS_AUDIO_SWR_RX_CGCR] =  { 0xa0, 1 },
+	[LPASS_AUDIO_SWR_WSA_CGCR] = { 0xb0, 1 },
+	[LPASS_AUDIO_SWR_WSA2_CGCR] =  { 0xd8, 1 },
+};
+
+static struct regmap_config lpass_audiocc_sc8280xp_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.name = "lpass-audio-csr",
+	.max_register = 0x1000,
+};
+
+static const struct qcom_cc_desc lpass_audiocc_reset_sc8280xp_desc = {
+	.config = &lpass_audiocc_sc8280xp_regmap_config,
+	.resets = lpass_audiocc_sc8280xp_resets,
+	.num_resets = ARRAY_SIZE(lpass_audiocc_sc8280xp_resets),
+};
+
 static const struct qcom_reset_map lpasscc_sc8280xp_resets[] = {
 	[LPASS_AUDIO_SWR_TX_CGCR] = { 0xc010, 1 },
 };
@@ -34,6 +54,9 @@ static const struct qcom_cc_desc lpasscc_reset_sc8280xp_desc = {
 
 static const struct of_device_id lpasscc_sc8280xp_match_table[] = {
 	{
+		.compatible = "qcom,sc8280xp-lpassaudiocc",
+		.data = &lpass_audiocc_reset_sc8280xp_desc,
+	}, {
 		.compatible = "qcom,sc8280xp-lpasscc",
 		.data = &lpasscc_reset_sc8280xp_desc,
 	},
-- 
2.21.0