[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <0102db2e22dc472091a586bb73b467d9@ti.com>
Date: Thu, 25 May 2023 12:53:38 +0000
From: "Ding, Shenghao" <shenghao-ding@...com>
To: Takashi Iwai <tiwai@...e.de>
CC: Shenghao Ding <13916275206@....com>,
"broonie@...nel.org" <broonie@...nel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"krzysztof.kozlowski+dt@...aro.org"
<krzysztof.kozlowski+dt@...aro.org>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"lgirdwood@...il.com" <lgirdwood@...il.com>,
"perex@...ex.cz" <perex@...ex.cz>,
"pierre-louis.bossart@...ux.intel.com"
<pierre-louis.bossart@...ux.intel.com>,
"Lu, Kevin" <kevin-lu@...com>,
"alsa-devel@...a-project.org" <alsa-devel@...a-project.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"Xu, Baojun" <x1077012@...com>, "Gupta, Peeyush" <peeyush@...com>,
"Navada Kanyana, Mukund" <navada@...com>,
"gentuser@...il.com" <gentuser@...il.com>,
"Ryan_Chu@...tron.com" <Ryan_Chu@...tron.com>,
"Sam_Wu@...tron.com" <Sam_Wu@...tron.com>
Subject: RE: [EXTERNAL] Re: [PATCH v3 4/5] ALSA: hda/tas2781: Add tas2781 HDA
driver
> -----Original Message-----
> From: Takashi Iwai <tiwai@...e.de>
> Sent: Tuesday, May 23, 2023 7:43 PM
> To: Ding, Shenghao <shenghao-ding@...com>
> Cc: Shenghao Ding <13916275206@....com>; broonie@...nel.org;
> devicetree@...r.kernel.org; krzysztof.kozlowski+dt@...aro.org;
> robh+dt@...nel.org; lgirdwood@...il.com; perex@...ex.cz; pierre-
> louis.bossart@...ux.intel.com; Lu, Kevin <kevin-lu@...com>; alsa-
> devel@...a-project.org; linux-kernel@...r.kernel.org; Xu, Baojun
> <x1077012@...com>; Gupta, Peeyush <peeyush@...com>; Navada Kanyana,
> Mukund <navada@...com>; gentuser@...il.com; Ryan_Chu@...tron.com;
> Sam_Wu@...tron.com
> Subject: Re: [EXTERNAL] Re: [PATCH v3 4/5] ALSA: hda/tas2781: Add tas2781
> HDA driver
>
> On Tue, 23 May 2023 13:22:03 +0200,
> Ding, Shenghao wrote:
> >
> > > + [ALC287_FIXUP_TAS2781_I2C_2] = {
> > > + .type = HDA_FIXUP_FUNC,
> > > + .v.func = tas2781_fixup_i2c,
> > > + .chained = true,
> > > + .chain_id = ALC269_FIXUP_THINKPAD_ACPI,
> > > + },
> > > + [ALC287_FIXUP_TAS2781_I2C_4] = {
> > > + .type = HDA_FIXUP_FUNC,
> > > + .v.func = tas2781_fixup_i2c,
> > > + .chained = true,
> > > + .chain_id = ALC269_FIXUP_THINKPAD_ACPI,
> > > + },
> >
> > What's a difference between *_2 and *_4?
> > Combine them into ALC287_FIXUP_TAS2781_I2C
>
> Hm, so there is no difference in stereo and quad speakers?
Yes, our firmware defines the stereo or quad speaker
>
> > > +static int tas2781_save_calibration(struct tasdevice_priv
> > > +*tas_priv) {
> > > + efi_guid_t efi_guid = EFI_GUID(0x02f9af02, 0x7734, 0x4233, 0xb4,
> 0x3d,
> > > + 0x93, 0xfe, 0x5a, 0xa3, 0x5d, 0xb3);
> > > + static efi_char16_t efi_name[] = L"CALI_DATA";
> > > + struct hda_codec *codec = tas_priv->codec;
> > > + unsigned int subid = codec->core.subsystem_id & 0xFFFF;
> > > + struct tm *tm = &tas_priv->tm;
> > > + unsigned int attr, crc;
> > > + unsigned int *tmp_val;
> > > + efi_status_t status;
> > > + int ret = 0;
> > > +
> > > + //Lenovo devices
> > > + if ((subid == 0x387d) || (subid == 0x387e) || (subid == 0x3881)
> > > + || (subid == 0x3884) || (subid == 0x3886) || (subid == 0x38a7)
> > > + || (subid == 0x38a8) || (subid == 0x38ba) || (subid ==
> 0x38bb)
> > > + || (subid == 0x38be) || (subid == 0x38bf) || (subid == 0x38c3)
> > > + || (subid == 0x38cb) || (subid == 0x38cd))
> > > + efi_guid = EFI_GUID(0x1f52d2a1, 0xbb3a, 0x457d, 0xbc, 0x09,
> > > + 0x43, 0xa3, 0xf4, 0x31, 0x0a, 0x92);
> >
> > Here can be a problem: the device ID is embedded here, and it's hard to
> find out. You'd better to make it some quirk flag that is set in a common
> place and check the flag here instead of checking ID at each place.
> >
> > Do you have example of the solution? I found some quirk flag is static in
> the patch_realtek.c, can't be accessed outside that file.
>
> You may store some values in struct hda_component, I suppose?
I will try it.
>
> BTW, please try to fix your mailer to do citation more correctly...
accept
>
>
> thanks,
>
> Takashi
Powered by blists - more mailing lists