[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5833388f-51c6-ad42-f8c2-2ad37cecc31f@linaro.org>
Date: Fri, 26 May 2023 22:52:05 +0200
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Robert Marko <robimarko@...il.com>, andersson@...nel.org,
agross@...nel.org, mturquette@...libre.com, sboyd@...nel.org,
linux-arm-msm@...r.kernel.org, linux-clk@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/2] clk: qcom: ipq6018: fix networking resets
On 26.05.2023 21:08, Robert Marko wrote:
> Networking resets in IPQ6018 all use bitmask as they require multiple
> bits to be set and cleared instead of a single bit.
>
> So, current networking resets have the same register and bit 0 set which
> is clearly incorrect.
>
> Fixes: d9db07f088af ("clk: qcom: Add ipq6018 Global Clock Controller support")
> Signed-off-by: Robert Marko <robimarko@...il.com>
> ---
> drivers/clk/qcom/gcc-ipq6018.c | 32 ++++++++++++++++----------------
> 1 file changed, 16 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/clk/qcom/gcc-ipq6018.c b/drivers/clk/qcom/gcc-ipq6018.c
> index abd97b939850f..b8310f29a8ff4 100644
> --- a/drivers/clk/qcom/gcc-ipq6018.c
> +++ b/drivers/clk/qcom/gcc-ipq6018.c
> @@ -4520,24 +4520,24 @@ static const struct qcom_reset_map gcc_ipq6018_resets[] = {
> [GCC_PCIE0_AHB_ARES] = { 0x75040, 5 },
> [GCC_PCIE0_AXI_MASTER_STICKY_ARES] = { 0x75040, 6 },
> [GCC_PCIE0_AXI_SLAVE_STICKY_ARES] = { 0x75040, 7 },
> - [GCC_PPE_FULL_RESET] = { 0x68014, 0 },
> - [GCC_UNIPHY0_SOFT_RESET] = { 0x56004, 0 },
> + [GCC_PPE_FULL_RESET] = { .reg = 0x68014, .bitmask = 0xf0000 },
GENMASK / GENMASK|GENMASK / GENMASK|BIT?
Konrad
> + [GCC_UNIPHY0_SOFT_RESET] = { .reg = 0x56004, .bitmask = 0x3ff2 },
> [GCC_UNIPHY0_XPCS_RESET] = { 0x56004, 2 },
> - [GCC_UNIPHY1_SOFT_RESET] = { 0x56104, 0 },
> + [GCC_UNIPHY1_SOFT_RESET] = { .reg = 0x56104, .bitmask = 0x32 },
> [GCC_UNIPHY1_XPCS_RESET] = { 0x56104, 2 },
> - [GCC_EDMA_HW_RESET] = { 0x68014, 0 },
> - [GCC_NSSPORT1_RESET] = { 0x68014, 0 },
> - [GCC_NSSPORT2_RESET] = { 0x68014, 0 },
> - [GCC_NSSPORT3_RESET] = { 0x68014, 0 },
> - [GCC_NSSPORT4_RESET] = { 0x68014, 0 },
> - [GCC_NSSPORT5_RESET] = { 0x68014, 0 },
> - [GCC_UNIPHY0_PORT1_ARES] = { 0x56004, 0 },
> - [GCC_UNIPHY0_PORT2_ARES] = { 0x56004, 0 },
> - [GCC_UNIPHY0_PORT3_ARES] = { 0x56004, 0 },
> - [GCC_UNIPHY0_PORT4_ARES] = { 0x56004, 0 },
> - [GCC_UNIPHY0_PORT5_ARES] = { 0x56004, 0 },
> - [GCC_UNIPHY0_PORT_4_5_RESET] = { 0x56004, 0 },
> - [GCC_UNIPHY0_PORT_4_RESET] = { 0x56004, 0 },
> + [GCC_EDMA_HW_RESET] = { .reg = 0x68014, .bitmask = 0x300000 },
> + [GCC_NSSPORT1_RESET] = { .reg = 0x68014, .bitmask = 0x1000003 },
> + [GCC_NSSPORT2_RESET] = { .reg = 0x68014, .bitmask = 0x200000c },
> + [GCC_NSSPORT3_RESET] = { .reg = 0x68014, .bitmask = 0x4000030 },
> + [GCC_NSSPORT4_RESET] = { .reg = 0x68014, .bitmask = 0x8000300 },
> + [GCC_NSSPORT5_RESET] = { .reg = 0x68014, .bitmask = 0x10000c00 },
> + [GCC_UNIPHY0_PORT1_ARES] = { .reg = 0x56004, .bitmask = 0x30 },
> + [GCC_UNIPHY0_PORT2_ARES] = { .reg = 0x56004, .bitmask = 0xc0 },
> + [GCC_UNIPHY0_PORT3_ARES] = { .reg = 0x56004, .bitmask = 0x300 },
> + [GCC_UNIPHY0_PORT4_ARES] = { .reg = 0x56004, .bitmask = 0xc00 },
> + [GCC_UNIPHY0_PORT5_ARES] = { .reg = 0x56004, .bitmask = 0x3000 },
> + [GCC_UNIPHY0_PORT_4_5_RESET] = { .reg = 0x56004, .bitmask = 0x3c02 },
> + [GCC_UNIPHY0_PORT_4_RESET] = { .reg = 0x56004, .bitmask = 0xc02 },
> [GCC_LPASS_BCR] = {0x1F000, 0},
> [GCC_UBI32_TBU_BCR] = {0x65000, 0},
> [GCC_LPASS_TBU_BCR] = {0x6C000, 0},
Powered by blists - more mailing lists