[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <0e703d3c-7ad9-6265-fa71-b62650b96e79@linaro.org>
Date: Fri, 26 May 2023 15:30:39 +0200
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Cc: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...ainline.org>,
Jordan Crouse <jordan@...micpenguin.net>,
Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
Vivek Gautam <vivek.gautam@...eaurora.org>,
Vinod Koul <vkoul@...nel.org>, Rob Clark <robdclark@...il.com>,
Stephen Boyd <sboyd@...eaurora.org>,
Marijn Suijten <marijn.suijten@...ainline.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Andy Gross <andy.gross@...aro.org>
Subject: Re: [PATCH 3/4] arm64: dts: qcom: msm8996: Improve GPU OPP table
On 30.03.2023 12:57, Konrad Dybcio wrote:
>
>
> On 29.03.2023 23:32, Dmitry Baryshkov wrote:
>> On Wed, 29 Mar 2023 at 22:17, Konrad Dybcio <konrad.dybcio@...aro.org> wrote:
>>>
>>> Remove the self-explanatory comment about opp-supported-hw contents,
>>> add required-opps to ensure reasonable power domain levels are voted
>>> for (currently we've been piggybacking off of miracles and MDP votes)
>>> and add newlines between each subnode.
>>
>> I'm not sure this is 100% correct. The values that you add are correct
>> for the voltage scaling case. However, based on the vendor kernel
>> sources I think that MX should only be scaled if the voltage is scaled
>> too. I might be wrong here.
> MX must be >= CX (and GX), so this should bring no harm.
>
> (citation needed, but that seems to hold true..)
With that in mind, would you ack these patches Dmitry?
Konrad
>
> Konrad
>>
>>>
>>> Fixes: 69cc3114ab0f ("arm64: dts: Add Adreno GPU definitions")
>>> Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
>>> ---
>>> arch/arm64/boot/dts/qcom/msm8996.dtsi | 18 +++++++++++++-----
>>> 1 file changed, 13 insertions(+), 5 deletions(-)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
>>> index 4dd37f72e018..62ad30e94f40 100644
>>> --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
>>> @@ -1244,37 +1244,45 @@ gpu: gpu@...000 {
>>> gpu_opp_table: opp-table {
>>> compatible = "operating-points-v2";
>>>
>>> - /*
>>> - * 624Mhz is only available on speed bins 0 and 3.
>>> - * 560Mhz is only available on speed bins 0, 2 and 3.
>>> - * All the rest are available on all bins of the hardware.
>>> - */
>>> opp-624000000 {
>>> opp-hz = /bits/ 64 <624000000>;
>>> + required-opps = <&rpmpd_opp_turbo>;
>>> opp-supported-hw = <0x09>;
>>> };
>>> +
>>> opp-560000000 {
>>> opp-hz = /bits/ 64 <560000000>;
>>> + required-opps = <&rpmpd_opp_turbo>;
>>> opp-supported-hw = <0x0d>;
>>> };
>>> +
>>> opp-510000000 {
>>> opp-hz = /bits/ 64 <510000000>;
>>> + required-opps = <&rpmpd_opp_nom>;
>>> opp-supported-hw = <0xff>;
>>> };
>>> +
>>> opp-401800000 {
>>> opp-hz = /bits/ 64 <401800000>;
>>> + required-opps = <&rpmpd_opp_nom>;
>>> opp-supported-hw = <0xff>;
>>> };
>>> +
>>> opp-315000000 {
>>> opp-hz = /bits/ 64 <315000000>;
>>> + required-opps = <&rpmpd_opp_svs>;
>>> opp-supported-hw = <0xff>;
>>> };
>>> +
>>> opp-214000000 {
>>> opp-hz = /bits/ 64 <214000000>;
>>> + required-opps = <&rpmpd_opp_svs>;
>>> opp-supported-hw = <0xff>;
>>> };
>>> +
>>> opp-133000000 {
>>> opp-hz = /bits/ 64 <133000000>;
>>> + required-opps = <&rpmpd_opp_svs>;
>>> opp-supported-hw = <0xff>;
>>> };
>>> };
>>>
>>> --
>>> 2.40.0
>>>
>>
>>
Powered by blists - more mailing lists