[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230526145402.450-4-walker.chen@starfivetech.com>
Date: Fri, 26 May 2023 22:54:02 +0800
From: Walker Chen <walker.chen@...rfivetech.com>
To: Mark Brown <broonie@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>,
Claudiu Beznea <Claudiu.Beznea@...rochip.com>,
Jaroslav Kysela <perex@...ex.cz>,
Takashi Iwai <tiwai@...e.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor.dooley@...rochip.com>,
Emil Renner Berthing <emil.renner.berthing@...onical.com>,
Hal Feng <hal.feng@...rfivetech.com>,
Walker Chen <walker.chen@...rfivetech.com>
CC: <alsa-devel@...a-project.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-riscv@...ts.infradead.org>
Subject: [PATCH v5 3/3] riscv: dts: starfive: add the node and pins configuration for tdm
Add the tdm controller node and pins configuration of tdm for the
StarFive JH7110 SoC.
Signed-off-by: Walker Chen <walker.chen@...rfivetech.com>
---
.../jh7110-starfive-visionfive-2.dtsi | 40 +++++++++++++++++++
arch/riscv/boot/dts/starfive/jh7110.dtsi | 21 ++++++++++
2 files changed, 61 insertions(+)
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index 1155b97b593d..19b5954ee72d 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -214,6 +214,40 @@
slew-rate = <0>;
};
};
+
+ tdm0_pins: tdm0-pins {
+ tdm0-pins-tx {
+ pinmux = <GPIOMUX(44, GPOUT_SYS_TDM_TXD,
+ GPOEN_ENABLE,
+ GPI_NONE)>;
+ bias-pull-up;
+ drive-strength = <2>;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+
+ tdm0-pins-rx {
+ pinmux = <GPIOMUX(61, GPOUT_HIGH,
+ GPOEN_DISABLE,
+ GPI_SYS_TDM_RXD)>;
+ input-enable;
+ };
+
+ tdm0-pins-sync {
+ pinmux = <GPIOMUX(63, GPOUT_HIGH,
+ GPOEN_DISABLE,
+ GPI_SYS_TDM_SYNC)>;
+ input-enable;
+ };
+
+ tdm0-pins-pcmclk {
+ pinmux = <GPIOMUX(38, GPOUT_HIGH,
+ GPOEN_DISABLE,
+ GPI_SYS_TDM_CLK)>;
+ input-enable;
+ };
+ };
};
&uart0 {
@@ -221,3 +255,9 @@
pinctrl-0 = <&uart0_pins>;
status = "okay";
};
+
+&tdm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&tdm0_pins>;
+ status = "okay";
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 866313570a7e..cfda6fb0d91b 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -366,6 +366,27 @@
status = "disabled";
};
+ tdm: tdm@...90000 {
+ compatible = "starfive,jh7110-tdm";
+ reg = <0x0 0x10090000 0x0 0x1000>;
+ clocks = <&syscrg JH7110_SYSCLK_TDM_AHB>,
+ <&syscrg JH7110_SYSCLK_TDM_APB>,
+ <&syscrg JH7110_SYSCLK_TDM_INTERNAL>,
+ <&syscrg JH7110_SYSCLK_TDM_TDM>,
+ <&syscrg JH7110_SYSCLK_MCLK_INNER>,
+ <&tdm_ext>;
+ clock-names = "tdm_ahb", "tdm_apb",
+ "tdm_internal", "tdm",
+ "mclk_inner", "tdm_ext";
+ resets = <&syscrg JH7110_SYSRST_TDM_AHB>,
+ <&syscrg JH7110_SYSRST_TDM_APB>,
+ <&syscrg JH7110_SYSRST_TDM_CORE>;
+ dmas = <&dma 20>, <&dma 21>;
+ dma-names = "rx","tx";
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
stgcrg: clock-controller@...30000 {
compatible = "starfive,jh7110-stgcrg";
reg = <0x0 0x10230000 0x0 0x10000>;
--
2.17.1
Powered by blists - more mailing lists