linux-kernel - Re: [PATCH 3/8] arm64: dts: qcom: msm8916: Fix regulator constraints

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <8bc6aaac-f28a-3ce7-8dea-f8484fd5b6c9@linaro.org>
Date:   Fri, 26 May 2023 16:43:49 +0100
From:   Bryan O'Donoghue <bryan.odonoghue@...aro.org>
To:     Stephan Gerhold <stephan@...hold.net>,
        Bjorn Andersson <andersson@...nel.org>
Cc:     Andy Gross <agross@...nel.org>,
        Konrad Dybcio <konrad.dybcio@...aro.org>,
        Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, phone-devel@...r.kernel.org,
        ~postmarketos/upstreaming@...ts.sr.ht
Subject: Re: [PATCH 3/8] arm64: dts: qcom: msm8916: Fix regulator constraints

On 17/05/2023 19:48, Stephan Gerhold wrote:
> The regulator constraints for most MSM8916 devices (except DB410c) were
> originally taken from Qualcomm's msm-3.10 vendor device tree (for lack
> of better documentation). Unfortunately it turns out that Qualcomm's
> voltages are slightly off as well and do not match the voltage
> constraints applied by the RPM firmware.
> 
> This means that we sometimes request a specific voltage but the RPM
> firmware actually applies a much lower or higher voltage. This is
> particularly critical for pm8916_l11 which is used as SD card VMMC
> regulator: The SD card can choose a voltage from the current range of
> 1.8 - 2.95V. If it chooses to run at 1.8V we pretend that this is fine
> but the RPM firmware will still silently end up configuring 2.95V.
> This can be easily reproduced with a multimeter or by checking the
> SPMI hardware registers of the regulator.
> 
> Fix this by making the voltages match the actual "specified range" in
> the PM8916 Device Specification which is enforced by the RPM firmware.
> 
> Signed-off-by: Stephan Gerhold <stephan@...hold.net>
> ---
>   arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts           | 14 +++++++-------
>   arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts       | 14 +++++++-------
>   arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts             | 14 +++++++-------
>   arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts         | 14 +++++++-------
>   arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts             | 12 ++++++------
>   arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts       | 14 +++++++-------
>   arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts       | 14 +++++++-------
>   arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi | 14 +++++++-------
>   arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi   | 14 +++++++-------
>   arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi    | 14 +++++++-------
>   arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts     | 14 +++++++-------
>   arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi                  | 14 +++++++-------
>   arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts      | 12 ++++++------
>   13 files changed, 89 insertions(+), 89 deletions(-)

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@...aro.org>