[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230529221501.43455-4-matti.lehtimaki@gmail.com>
Date: Tue, 30 May 2023 01:15:01 +0300
From: Matti Lehtimäki <matti.lehtimaki@...il.com>
To: linux-arm-msm@...r.kernel.org
Cc: ~postmarketos/upstreaming@...ts.sr.ht, phone-devel@...r.kernel.org,
Matti Lehtimäki <matti.lehtimaki@...il.com>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 3/3] ARM: dts: qcom: pm8941: Add thermal zone config
Add thermal zone for the PMIC thermal sensor.
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@...il.com>
---
arch/arm/boot/dts/qcom-pm8941.dtsi | 31 ++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index a821f0368a28..b3e246bacd78 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -3,6 +3,37 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
+
+/ {
+ thermal-zones {
+ pm8941-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8941_temp>;
+
+ trips {
+ trip0 {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ trip1 {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ crit {
+ temperature = <145000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+};
+
&spmi_bus {
pm8941_0: pm8941@0 {
--
2.34.1
Powered by blists - more mailing lists