| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 29 May 2023 11:07:31 +0300
From: Laurent Pinchart <laurent.pinchart@...asonboard.com>
To: Tommaso Merciai <tomm.merciai@...il.com>
Cc: Sakari Ailus <sakari.ailus@...ux.intel.com>,
jacopo.mondi@...asonboard.com, martin.hecht@...et.eu,
linuxfancy@...glegroups.com,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Hans Verkuil <hverkuil@...all.nl>,
Marco Felsch <m.felsch@...gutronix.de>,
Gerald Loacker <gerald.loacker@...fvision.net>,
Krzysztof Hałasa <khalasa@...p.pl>,
Shawn Tu <shawnx.tu@...el.com>,
Linus Walleij <linus.walleij@...aro.org>,
Benjamin Mugnier <benjamin.mugnier@...s.st.com>,
Mikhail Rudenko <mike.rudenko@...il.com>,
Nicholas Roth <nicholas@...hemail.net>,
linux-media@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Michael Roeder <michael.roeder@...et.eu>
Subject: Re: [PATCH v2 1/2] media: dt-bindings: alvium: add document YAML
binding
On Mon, May 29, 2023 at 09:57:45AM +0200, Tommaso Merciai wrote:
> On Mon, May 29, 2023 at 09:39:07AM +0300, Laurent Pinchart wrote:
> > On Sun, May 28, 2023 at 09:16:05PM +0000, Sakari Ailus wrote:
> > > On Fri, May 26, 2023 at 07:39:43PM +0200, Tommaso Merciai wrote:
> > > > Add documentation of device tree in YAML schema for the ALVIUM
> > > > Camera from Allied Vision Inc.
> > > >
> > > > References:
> > > > - https://www.alliedvision.com/en/products/embedded-vision-solutions
> > > >
> > > > Signed-off-by: Tommaso Merciai <tomm.merciai@...il.com>
> > > > ---
> > > > Changes since v1:
> > > > - Fixed build error as suggested by RHerring bot
> > > >
> > > > .../media/i2c/alliedvision,alvium.yaml | 115 ++++++++++++++++++
> > > > 1 file changed, 115 insertions(+)
> > > > create mode 100644 Documentation/devicetree/bindings/media/i2c/alliedvision,alvium.yaml
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/media/i2c/alliedvision,alvium.yaml b/Documentation/devicetree/bindings/media/i2c/alliedvision,alvium.yaml
> > > > new file mode 100644
> > > > index 000000000000..81e9e560c99d
> > > > --- /dev/null
> > > > +++ b/Documentation/devicetree/bindings/media/i2c/alliedvision,alvium.yaml
> > > > @@ -0,0 +1,115 @@
> > > > +# SPDX-License-Identifier: GPL-2.0
> > > > +%YAML 1.2
> > > > +---
> > > > +$id: http://devicetree.org/schemas/media/i2c/alliedvision,alvium.yaml#
> > > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > > +
> > > > +title: Alliedvision Alvium Camera
> >
> > s/Alliedvision/Allied Vision/
>
> Arg... Thanks :)
>
> > > > +
> > > > +maintainers:
> > > > + - Tommaso Merciai <tomm.merciai@...il.com>
> > > > + - Martin Hecht <martin.hecht@...et.eu>
> > > > +
> > > > +allOf:
> > > > + - $ref: /schemas/media/video-interface-devices.yaml#
> > > > +
> > > > +properties:
> > > > + compatible:
> > > > + const: alliedvision,alvium
> >
> > The name is very generic. There are Alvium camera modules that have a
> > GMSL or FPD-Link interface, and I'm pretty sure those will require a
> > different driver. I would add module-specific compatible strings (e.g.
> > "alliedvision,alvium-1500c", ...) here, with a generic fallback.
> > "alliedvision,alvium" isn't good as it won't cover GMSL or FPD-Link,
> > maybe "alliedvision,alvium-csi2" would be an option.
> >
> > > > +
> > > > + reg:
> > > > + maxItems: 1
> > > > +
> > > > + clocks:
> > > > + description: XCLK Input Clock
> > > > +
> > > > + clock-names:
> > > > + const: xclk
> > >
> > > I'd also drop this as you have a single clock only: it's redundant.
> > >
> > > > +
> > > > + powerdown-gpios:
> > > > + maxItems: 1
> > > > + description: >
> > > > + Reference to the GPIO connected to the powerdown pin, if any.
> > > > +
> > > > + reset-gpios:
> > > > + maxItems: 1
> > > > + description: >
> > > > + Reference to the GPIO connected to the reset pin, if any.
> >
> > Reading the Alvium CSI-2 Cameras User Guide, I don't see any powerdown
> > or reset pin on the 22-pin connector. Am I missing something ? There are
> > however two GPIOs (in addition to the I2C signals that are also
> > documented as GPIOs), do you plan to support those ?
>
> You are completely right I will drop rst and pwdn pins.
> About 2 gpios, we don't use those for now.
>
> > > > +
> > > > + streamon-delay:
> > > > + maxItems: 1
> > > > + description: >
> > > > + Delay before camera start capturing frames in us.
> >
> > Add "-us" to the property name to indicate the unit.
> >
> > This is a vendor-specific property, and should thus have a vendor
> > prefix.
> >
> > A longer description is needed, from that single line I have no idea
> > what the property does exactly.
>
> Thanks for the suggestion.
> I will provide a cleared description on v3.
>
> > > > +
> > > > + rotation:
> > > > + enum:
> > > > + - 0
> > > > + - 180
> >
> > Why is the rotation restricted to 0 or 180 ? Someone could mount the
> > module with 90 degrees rotation, shouldn't the DT bindings allow
> > describing that ?
>
> I'll drop rotation.
>
> > You need a property for the vcc-ext-in supply.
>
> Can you give me more details about this?
> Thanks.
The 22-pin connector has power supply pins, you need a corresponding
-supply property in DT to reference the regulator that provides the
supply (and you need to handle it in the driver too).
> > > > +
> > > > + port:
> > > > + description: Digital Output Port
> > > > + $ref: /schemas/graph.yaml#/$defs/port-base
> > > > + additionalProperties: false
> > > > +
> > > > + properties:
> > > > + endpoint:
> > > > + $ref: /schemas/media/video-interfaces.yaml#
> > > > + unevaluatedProperties: false
> > > > +
> > > > + properties:
> > > > + clock-lanes:
> > > > + const: 0
> > >
> > > The driver can know this, no need to have it in DT, i.e. please drop it.
> > >
> > > > + data-lanes:
> > > > + minItems: 1
> > > > + maxItems: 4
> > > > + link-frequencies: true
> > > > +
> > > > + required:
> > > > + - data-lanes
> > > > + - link-frequencies
> > > > +
> > > > +required:
> > > > + - compatible
> > > > + - reg
> > > > + - clocks
> > > > + - clock-names
> > > > + - port
> > > > +
> > > > +additionalProperties: false
> > > > +
> > > > +examples:
> > > > + - |
> > > > + #include <dt-bindings/gpio/gpio.h>
> > > > + #include <dt-bindings/clock/imx8mp-clock.h>
> > > > +
> > > > + i2c {
> > > > + #address-cells = <1>;
> > > > + #size-cells = <0>;
> > > > +
> > > > + camera: alvium@3c {
> > > > + compatible = "alliedvision,alvium";
> >
> > The "alliedvision" prefix is missing from
> > Documentation/devicetree/bindings/vendor-prefixes.yaml.
>
> oks
>
> >
> > > > + pinctrl-names = "default";
> > > > + pinctrl-0 = <&pinctrl_csi0_pwn>, <&pinctrl_csi0_rst>, <&pinctrl_csi_mclk>;
> >
> > I'd drop pinctrl, it makes the example longer without adding much value.
>
> oks
>
> >
> > > > + reg = <0x3c>;
> > > > + clocks = <&clk IMX8MP_CLK_IPP_DO_CLKO2>;
> > > > + clock-names = "xclk";
> > > > + assigned-clocks = <&clk IMX8MP_CLK_IPP_DO_CLKO2>;
> > > > + assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
> > > > + assigned-clock-rates = <24000000>;
> > > > + streamon-delay = <20>;
> > > > + powerdown-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
> > > > + reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
> > > > + status = "okay";
> > > > +
> > > > + port {
> > > > + alvium_out: endpoint {
> > > > + remote-endpoint = <&mipi_csi_0_in>;
> > > > + data-lanes = <1 2 3 4>;
> > > > + link-frequencies = /bits/ 64 <681250000>;
> > > > + clock-lanes = <0>;
> > > > + };
> > > > + };
> > > > + };
> > > > + };
> > > > +
> > > > +...
--
Regards,
Laurent Pinchart
Powered by blists - more mailing lists