[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <2680722.mvXUDI8C0e@z3ntu.xyz>
Date: Mon, 29 May 2023 10:38:20 +0200
From: Luca Weiss <luca@...tu.xyz>
To: ~postmarketos/upstreaming@...ts.sr.ht, phone-devel@...r.kernel.org,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Brian Masney <masneyb@...tation.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>
Cc: linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2] soc: qcom: ocmem: Add OCMEM hardware version print
On Freitag, 26. Mai 2023 21:39:44 CEST Konrad Dybcio wrote:
> On 23.05.2023 22:32, Luca Weiss wrote:
> > It might be useful to know what hardware version of the OCMEM block the
> > SoC contains. Add a debug print for that.
> >
> > Signed-off-by: Luca Weiss <luca@...tu.xyz>
> > ---
> > This patch is depends on [0] but could also be applied in the other
> > order, if conflicts are resolved.
> >
> > [0]
> > https://lore.kernel.org/linux-arm-msm/20230506-msm8226-ocmem-v1-1-3e24e27
> > 24f01@...tu.xyz/ ---
> > Changes in v2:
> > - Use FIELD_GET macros for getting correct bits from register (take
> >
> > wording from mdp5: major, minor, step which hopefully is sort of
> > accurate)
>
> Qualcomm uses that (or that-ish) nomenclature for many hw blocks, so
> it's likely spot on.
>
> > - Link to v1:
> > https://lore.kernel.org/r/20230509-ocmem-hwver-v1-1-b83ece3f2168@z3ntu.xy
> > z ---
> >
> > drivers/soc/qcom/ocmem.c | 9 +++++++++
> > 1 file changed, 9 insertions(+)
> >
> > diff --git a/drivers/soc/qcom/ocmem.c b/drivers/soc/qcom/ocmem.c
> > index c3e78411c637..9f7c3348cbb9 100644
> > --- a/drivers/soc/qcom/ocmem.c
> > +++ b/drivers/soc/qcom/ocmem.c
> > @@ -76,6 +76,10 @@ struct ocmem {
> >
> > #define OCMEM_REG_GFX_MPU_START 0x00001004
> > #define OCMEM_REG_GFX_MPU_END 0x00001008
> >
> > +#define OCMEM_HW_VERSION_MAJOR(val) FIELD_GET(GENMASK(31, 28), val)
> > +#define OCMEM_HW_VERSION_MINOR(val) FIELD_GET(GENMASK(27, 16), val)
> > +#define OCMEM_HW_VERSION_STEP(val) FIELD_GET(GENMASK(15, 0), val)
> > +
> >
> > #define OCMEM_HW_PROFILE_NUM_PORTS(val) FIELD_GET(0x0000000f, (val))
> > #define OCMEM_HW_PROFILE_NUM_MACROS(val) FIELD_GET(0x00003f00, (val))
> >
> > @@ -355,6 +359,11 @@ static int ocmem_dev_probe(struct platform_device
> > *pdev)>
> > }
> >
> > }
> >
> > + reg = ocmem_read(ocmem, OCMEM_REG_HW_VERSION);
> > + dev_dbg(dev, "OCMEM hardware version: %ld.%ld.%ld\n",
>
> reg is an unsigned long (u32), this should probably be %u
I can make it %lu, just %u gives me this warning
drivers/soc/qcom/ocmem.c:363:22: warning: format '%u' expects argument of type 'unsigned int', but argument 6 has type 'long unsigned int' [-Wformat=]
363 | dev_dbg(dev, "OCMEM hardware version: %u.%u.%u\n",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Will send a v3 with that.
>
> > + OCMEM_HW_VERSION_MAJOR(reg), OCMEM_HW_VERSION_MINOR(reg),
> > + OCMEM_HW_VERSION_STEP(reg));
>
> Nit: one per line would make this the tiniest bit easier to read
ack
Regards
Luca
>
> Konrad
>
> > +
> >
> > reg = ocmem_read(ocmem, OCMEM_REG_HW_PROFILE);
> > ocmem->num_ports = OCMEM_HW_PROFILE_NUM_PORTS(reg);
> > ocmem->num_macros = OCMEM_HW_PROFILE_NUM_MACROS(reg);
> >
> > ---
> > base-commit: 8705151771af822ac794b44504cd72eebc423499
> > change-id: 20230509-ocmem-hwver-99bcb33b028b
> >
> > Best regards,
Powered by blists - more mailing lists