[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230529091359.71987-2-raphael.gallais-pou@foss.st.com>
Date: Mon, 29 May 2023 11:13:56 +0200
From: Raphael Gallais-Pou <raphael.gallais-pou@...s.st.com>
To: David Airlie <airlied@...il.com>, Daniel Vetter <daniel@...ll.ch>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Marek Vasut <marex@...x.de>,
Philippe Cornu <philippe.cornu@...s.st.com>,
Yannick Fertre <yannick.fertre@...s.st.com>
CC: <dri-devel@...ts.freedesktop.org>, <devicetree@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <kernel@...electronics.com>,
Raphael Gallais-Pou <raphael.gallais-pou@...s.st.com>
Subject: [PATCH v4 1/4] ARM: dts: stm32: fix warnings on stm32f469-disco board
Several warnings appear when building and checking stm32f429 device-tree:
arch/arm/boot/dts/stm32f469-disco.dts:182.28-184.5: Warning (unit_address_vs_reg): /soc/display-controller@...16800/port/endpoint@0: node has a unit name, but no reg or ranges property
.../arch/arm/boot/dts/stm32f469-disco.dtb: dsi@...16c00: Unevaluated properties are not allowed ('panel-dsi@0' was unexpected)
From schema: .../Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
Fix those.
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@...s.st.com>
Reviewed-by: Marek Vasut <marex@...x.de>
---
arch/arm/boot/dts/stm32f469-disco.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
index 5a0daf8e8b11..cbbd521bf010 100644
--- a/arch/arm/boot/dts/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/stm32f469-disco.dts
@@ -160,7 +160,7 @@ dsi_out: endpoint {
};
};
- panel-dsi@0 {
+ panel@0 {
compatible = "orisetech,otm8009a";
reg = <0>; /* dsi virtual channel (0..3) */
reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
@@ -179,7 +179,7 @@ <dc {
status = "okay";
port {
- ltdc_out_dsi: endpoint@0 {
+ ltdc_out_dsi: endpoint {
remote-endpoint = <&dsi_in>;
};
};
--
2.25.1
Powered by blists - more mailing lists