[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230529095728.83993-1-luca.ceresoli@bootlin.com>
Date: Mon, 29 May 2023 11:57:28 +0200
From: Luca Ceresoli <luca.ceresoli@...tlin.com>
To: devicetree@...r.kernel.org
Cc: Luca Ceresoli <luca.ceresoli@...tlin.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH v3] arm64: dts: imx8mp-msc-sm2s: Add sound card
The MSC SM2-MB-EP1 carrier board for the SM2S-IMX8PLUS SMARC module has an
NXP SGTL5000 audio codec connected to I2S-0 (sai2).
This requires to:
* add the power supplies (always on)
* enable sai2 with pinmuxes
* reparent the CLKOUT1 clock that feeds the codec SYS_MCLK to
IMX8MP_CLK_24M in order it to generate an accurate 24 MHz rate
Signed-off-by: Luca Ceresoli <luca.ceresoli@...tlin.com>
---
Changed in v3:
- renamed codec node name to "audio-codec"
Changed in v2:
- switch to simple-audio-card
- fix typo in commit message
- no underscores in node names
- rename "sgtl5000-sound" node to "sound"
---
.../dts/freescale/imx8mp-msc-sm2s-ep1.dts | 70 +++++++++++++++++++
1 file changed, 70 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
index 470ff8e31e32..64d522c71a44 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
@@ -14,6 +14,67 @@ / {
compatible = "avnet,sm2s-imx8mp-14N0600E-ep1",
"avnet,sm2s-imx8mp-14N0600E", "avnet,sm2s-imx8mp",
"fsl,imx8mp";
+
+ reg_vcc_3v3_audio: 3v3-audio-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3V3_AUD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_vcc_1v8_audio: 1v8-audio-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_1V8_AUD";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "sgtl5000-audio";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,frame-master = <&codec_dai>;
+ simple-audio-card,bitclock-master = <&codec_dai>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai2>;
+ };
+
+ codec_dai: simple-audio-card,codec {
+ sound-dai = <&sgtl5000>;
+ };
+ };
+};
+
+&i2c1 {
+ sgtl5000: audio-codec@a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+
+ assigned-clocks = <&clk IMX8MP_CLK_CLKOUT1_SEL>;
+ assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
+ assigned-clock-rates = <24000000>;
+ clocks = <&clk IMX8MP_CLK_CLKOUT1>;
+ clock-names = "mclk";
+ #sound-dai-cells = <0>;
+
+ VDDA-supply = <®_vcc_3v3_audio>;
+ VDDD-supply = <®_vcc_1v8_audio>;
+ VDDIO-supply = <®_vcc_1v8_audio>;
+ };
+};
+
+/* I2S-0 = sai2 */
+&sai2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai2>;
+
+ assigned-clocks = <&clk IMX8MP_CLK_SAI2>;
+ assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <12288000>;
+
+ fsl,sai-mclk-direction-output;
+ status = "okay";
};
&flexcan1 {
@@ -32,6 +93,15 @@ &iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_smarc_gpio>;
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC 0xd6
+ MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK 0xd6
+ MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00 0xd6
+ MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 0xd6
+ >;
+ };
+
pinctrl_smarc_gpio: smarcgpiosgrp {
fsl,pins =
<MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x19>, /* GPIO0 */
base-commit: b20b0e97fc472249839abdc4d69cffdc695e97aa
--
2.34.1
Powered by blists - more mailing lists