[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230529104913.560045-1-s-vadapalli@ti.com>
Date: Mon, 29 May 2023 16:19:11 +0530
From: Siddharth Vadapalli <s-vadapalli@...com>
To: <nm@...com>, <vigneshr@...com>, <kristo@...nel.org>,
<robh+dt@...nel.org>, <krzysztof.kozlowski@...aro.org>,
<krzysztof.kozlowski+dt@...aro.org>, <afd@...com>
CC: <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <srk@...com>,
<s-vadapalli@...com>
Subject: [PATCH 0/2] Add MAIN CPSW2G DT support for J721S2
Hello,
This series adds devicetree node for MAIN CPSW2G instance of CPSW
Ethernet Switch on TI's J721S2 SoC. Also, a devicetree overlay is added
in order to enable MAIN CPSW2G in RGMII-RXID mode using the GESI
Expansion Board connected to the J7 Common-Processor-Board.
NOTE: This series applies on top of the following series:
https://lore.kernel.org/r/20230331090028.8373-1-r-gunasekaran@ti.com/
which in turn has been applied on linux-next tagged next-20230525.
Regards,
Siddharth.
---
RFC series at:
https://lore.kernel.org/r/20230426105718.118806-1-s-vadapalli@ti.com
Changes since RFC series:
- Add GESI board product link in the device-tree overlay file.
Kishon Vijay Abraham I (2):
arm64: dts: ti: k3-j721s2-main: Add main CPSW2G devicetree node
arm64: dts: ti: k3-j721s2: Add overlay to enable main CPSW2G with GESI
arch/arm64/boot/dts/ti/Makefile | 2 +
.../dts/ti/k3-j721s2-evm-gesi-exp-board.dtso | 85 +++++++++++++++++++
arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 69 +++++++++++++++
3 files changed, 156 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-j721s2-evm-gesi-exp-board.dtso
--
2.25.1
Powered by blists - more mailing lists